oopt-gnpy/tests/invocation/transmission_main_example

Power mode is set to True
=> it can be modified in eqpt_config.json - Span
 
There are 1 fiber spans over 80 km between Site_A and Site_B
 
Now propagating between Site_A and Site_B:
Reference used for design: (Input optical power reference in span = 0.00dBm,
spacing = 50.00GHz
nb_channels = 76)
 
Channels propagating: (Input optical power deviation in span = 0.00dB,
spacing = 50.00GHz,
transceiver output power = 0.00dBm,
nb_channels = 76)
Input optical power reference in span = 0.00 dBm:
Transceiver Site_A
GSNR (0.1nm, dB): 40.00
GSNR (signal bw, dB): 35.92
OSNR ASE (0.1nm, dB): 40.00
OSNR ASE (signal bw, dB): 35.92
CD (ps/nm): 0.00
PMD (ps): 0.00
PDL (dB): 0.00
Latency (ms): 0.00
Actual pch out (dBm): 0.00
Fiber Span1
type_variety: SSMF
length (km): 80.00
pad att_in (dB): 0.00
total loss (dB): 17.00
(includes conn loss (dB) in: 0.50 out: 0.50)
(conn loss out includes EOL margin defined in eqpt_config.json)
reference pch out (dBm): -17.00
actual pch out (dBm): -17.00
Edfa Edfa1
type_variety: std_low_gain
effective gain(dB): 15.00
(before att_in and before output VOA)
tilt-target(dB) 0.00
noise figure (dB): 6.62
(including att_in)
pad att_in (dB): 0.00
Power In (dBm): 1.81
Power Out (dBm): 16.82
Delta_P (dB): -2.00
target pch (dBm): -2.00
actual pch out (dBm): -1.99
output VOA (dB): 0.00
Transceiver Site_B
GSNR (0.1nm, dB): 31.18
GSNR (signal bw, dB): 27.10
OSNR ASE (0.1nm, dB): 33.30
OSNR ASE (signal bw, dB): 29.21
CD (ps/nm): 1336.00
PMD (ps): 0.85
PDL (dB): 0.00
Latency (ms): 0.39
Actual pch out (dBm): 0.00
 
Transmission result for input optical power reference in span = 0.00 dBm:
Final GSNR (0.1 nm): 31.18 dB
 
(No source node specified: picked Site_A)
 
(No destination node specified: picked Site_B)