8.5 KiB
OWANALYTICS Configuration
Here is the list of parameters you can configure in the owanalytics.properties file.
OWANALYTICS Specific Parameters
firmware.updater.upgrade = false
firmware.updater.releaseonly = false
Generic OpenWiFi SDK parameters
REST API External parameters
These are the parameters required for the configuration of the external facing REST API server
openwifi.restapi.host.0.backlog = 100
openwifi.restapi.host.0.security = relaxed
openwifi.restapi.host.0.rootca = $OWANALYTICS_ROOT/certs/restapi-ca.pem
openwifi.restapi.host.0.address = *
openwifi.restapi.host.0.port = 16005
openwifi.restapi.host.0.cert = $OWANALYTICS_ROOT/certs/restapi-cert.pem
openwifi.restapi.host.0.key = $OWANALYTICS_ROOT/certs/restapi-key.pem
openwifi.restapi.host.0.key.password = mypassword
openwifi.restapi.host.0.backlog
This is the number of concurrent REST API calls that maybe be kept in the backlog for processing. That's a good rule of thumb. Never go above 500.
openwifi.restapi.host.0.rootca
This is the root file of your own certificate CA in pem format.
openwifi.restapi.host.0.cert
This is your own server certificate in pem format..
openwifi.restapi.host.0.key
This is the private key associated with your own certificate in pem format.
openwifi.restapi.host.0.address
Leve this a * in the case you want to bind to all interfaces on your gateway host or select the address of a single interface.
openwifi.restapi.host.0.port
The port on which the REST API server is listening. By default, this is 16002.
openwifi.restapi.host.0.security
Leave this as relaxed for now for devices.
openwifi.restapi.host.0.key.password
If you key file uses a password, please enter it here.
REST API Intra microservice parameters
The following parameters describe the configuration for the inter-microservice HTTP server. You may use the same certificate/key you are using for your extenral server or another certificate.
openwifi.internal.restapi.host.0.backlog = 100
openwifi.internal.restapi.host.0.security = relaxed
openwifi.internal.restapi.host.0.rootca = $OWANALYTICS_ROOT/certs/restapi-ca.pem
openwifi.internal.restapi.host.0.address = *
openwifi.internal.restapi.host.0.port = 17005
openwifi.internal.restapi.host.0.cert = $OWANALYTICS_ROOT/certs/restapi-cert.pem
openwifi.internal.restapi.host.0.key = $OWANALYTICS_ROOT/certs/restapi-key.pem
openwifi.internal.restapi.host.0.key.password = mypassword
openwifi.internal.host.0.backlog
This is the number of concurrent REST API calls that maybe be kept in the backlog for processing. That's a good rule of thumb. Never go above 500.
openwifi.internal.host.0.rootca
This is the root file of your own certificate CA in pem format.
openwifi.internal.host.0.cert
This is your own server certificate in pem format..
openwifi.internal.host.0.key
This is the private key associated with your own certificate in pem format.
openwifi.internal.host.0.address
Leve this a * in the case you want to bind to all interfaces on your gateway host or select the address of a single interface.
openwifi.internal.host.0.port
The port on which the REST API server is listening. By default, this is 17002.
openwifi.internal.host.0.security
Leave this as relaxed for now for devices.
openwifi.internal.host.0.key.password
If you key file uses a password, please enter it here.
Microservice information
These are different Microservie parameters. Following is a brief explanation.
openwifi.service.key = $OWANALYTICS_ROOT/certs/restapi-key.pem
openwifi.service.key.password = mypassword
openwifi.system.data = $OWANALYTICS_ROOT/data
openwifi.system.uri.private = https://localhost:17005
openwifi.system.uri.public = https://openwifi.example.com:16005
openwifi.system.uri.ui = https://provisioning-ui.arilia.com
openwifi.security.restapi.disable = false
openwifi.system.commandchannel = /tmp/app.ucentralanalytics
openwifi.autoprovisioning = true
openwifi.service.key
From time to time, the microservice must encrypt information. This is the key it should use. You may use the same keey as you RESTAPI or your server.
openwifi.service.key.password
The password for the openwifi.service.key
openwifi.system.data
The location of system data. This path must exist.
openwifi.system.uri.private
The URI to reach the controller on the internal port.
openwifi.system.uri.public
The URI to reach the controller from the outside world.
openwifi.system.uri.ui
The URI of the UI to manage this service
openwifi.security.restapi.disable
This allows to disable security for internal and external API calls. This should only be used if the controller
sits behind an application load balancer that will actually do TLS. Setting this to true disables security.
openwifi.system.commandchannel
The UNIX socket command channel used by this service.
openwifi.autoprovisioning
Allow unknown devices to be provisioned by the system.
ALB Support
In order to support an application load balancer health check verification, your need to provide the following parameters.
alb.enable = true
alb.port = 16105
Kafka
The controller use Kafka, like all the other microservices. You must configure the kafka section in order for the system to work.
openwifi.kafka.group.id = analytics
openwifi.kafka.client.id = analytics1
openwifi.kafka.enable = true
openwifi.kafka.brokerlist = my_Kafka.example.com:9092
openwifi.kafka.auto.commit = false
openwifi.kafka.queue.buffering.max.ms = 50
openwifi.kafka.group.id
The group ID is a single word that should identify the type of service tuning. In the case analytics
openwifi.kafka.client.id
The client ID is a single service within that group ID. Each participant must have a unique client ID.
openwifi.kafka.enable
Kafka should always be enabled.
openwifi.kafka.brokerlist
The list of servers where your Kafka server is running. Comma separated.
openwifi.kafka.auto.commit
Auto commit flag in Kafka. Leave as false.
openwifi.kafka.queue.buffering.max.ms
Kafka buffering. Leave as 50.
Kafka security
If you intend to use SSL, you should look into Kafka Connect and specify the certificates below.
penwifi.kafka.ssl.ca.location =
openwifi.kafka.ssl.certificate.location =
openwifi.kafka.ssl.key.location =
openwifi.kafka.ssl.key.password =
DB Type
The controller supports 3 types of Database. SQLite should only be used for sites with less than 100 APs or for testing in the lab.
In order to select which database to use, you must set the storage.type value to sqlite, postgresql, or mysql.
storage.type = sqlite
#storage.type = postgresql
#storage.type = mysql
Storage SQLite parameters
Additional parameters to set for SQLite. The only important one is storage.type.sqlite.db which is the database name on disk.
storage.type.sqlite.db = analytics.db
storage.type.sqlite.idletime = 120
storage.type.sqlite.maxsessions = 128
Storage Postgres
Additional parameters to set if you select Postgres for your database. You must specify host, username, password,
database, and port.
storage.type.postgresql.maxsessions = 64
storage.type.postgresql.idletime = 60
storage.type.postgresql.host = localhost
storage.type.postgresql.username = analytics
storage.type.postgresql.password = analytics
storage.type.postgresql.database = analytics
storage.type.postgresql.port = 5432
storage.type.postgresql.connectiontimeout = 60
Storage MySQL/MariaDB
Additional parameters to set if you select mysql for your database. You must specify host, username, password,
database, and port.
storage.type.mysql.maxsessions = 64
storage.type.mysql.idletime = 60
storage.type.mysql.host = localhost
storage.type.postgresql.username = analytics
storage.type.postgresql.password = analytics
storage.type.postgresql.database = analytics
storage.type.mysql.port = 3306
storage.type.mysql.connectiontimeout = 60
Logging Parameters
The microservice provides extensive logging. If you would like to keep logging on disk, set the logging.type = file. If you only want
console logging, set logging.type = console. When selecting file, logging.path must exist. logging.level sets the
basic logging level for the entire controller. logging.websocket disables WebSocket logging.
logging.type = file
logging.path = $OWANALYTICS_ROOT/logs
logging.level = information
logging.asynch = true
logging.websocket = false