diff --git a/devices/ssc338q_apfpv/general/overlay/etc/udhcpd.conf b/devices/ssc338q_apfpv/general/overlay/etc/udhcpd.conf
index 84e3f3b..3979705 100644
--- a/devices/ssc338q_apfpv/general/overlay/etc/udhcpd.conf
+++ b/devices/ssc338q_apfpv/general/overlay/etc/udhcpd.conf
@@ -1,6 +1,6 @@
 interface wlan0
 start 192.168.0.10
-end 192.168.0.10
+end 192.168.0.20
 opt dns 192.168.0.1
 opt router 192.168.0.1
 opt subnet 255.255.255.0
diff --git a/devices/ssc338q_apfpv/general/overlay/usr/bin/adapter b/devices/ssc338q_apfpv/general/overlay/usr/bin/adapter
index f05939f..c5f3500 100755
--- a/devices/ssc338q_apfpv/general/overlay/usr/bin/adapter
+++ b/devices/ssc338q_apfpv/general/overlay/usr/bin/adapter
@@ -22,14 +22,17 @@ case "$1" in
 			case "$card" in
 				"0bda:8812" | "0bda:881a" | "0b05:17d2" | "2357:0101" | "2604:0012")
 					driver=88XXau
+					rate=0x8D
 					;;
 
 				"0bda:a81a")
 					driver=8812eu
+					rate=0x8D
 					;;
 
 				"0bda:f72b" | "0bda:b733")
 					driver=8733bu
+					rate=0x8D
 					;;
 			esac
 		done
@@ -41,10 +44,10 @@ case "$1" in
 
 		echo "Detected driver: $driver"
 		modprobe "$driver" rtw_tx_pwr_by_rate=0 rtw_tx_pwr_lmt_enable=0
+		echo "$rate" > $(ls /proc/net/*/wlan0/rate_ctl)
 		;;
 
 	start)
-		iw wlan0 set txpower fixed $(fw_printenv -n wlanpwr || echo 1500)
 		set_config
 		hostapd /tmp/hostapd.conf -B
 		udhcpd -S
diff --git a/devices/ssc338q_apfpv/general/overlay/usr/share/openipc/customizer.sh b/devices/ssc338q_apfpv/general/overlay/usr/share/openipc/customizer.sh
index b98fa5e..5b6ffc0 100644
--- a/devices/ssc338q_apfpv/general/overlay/usr/share/openipc/customizer.sh
+++ b/devices/ssc338q_apfpv/general/overlay/usr/share/openipc/customizer.sh
@@ -12,7 +12,7 @@ fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/o
 #
 cli -s .isp.exposure 15
 cli -s .video0.fps 60
-cli -s .video0.bitrate 10000
+cli -s .video0.bitrate 12000
 cli -s .video0.codec h265
 cli -s .video0.rcMode avbr
 cli -s .outgoing.enabled true