diff --git a/.github/workflows/master.yml b/.github/workflows/master.yml
index d9100c4..3043ac3 100644
--- a/.github/workflows/master.yml
+++ b/.github/workflows/master.yml
@@ -76,6 +76,9 @@ jobs:
           - t21_lite_smartwares-cip-37210at
           - t21_lite_xyx-06s
           - t21_lite_wansview-q5-1080p
+          - t23_lite_jooan-a6m-u
+          - t23_lite_jooan-q3r-u
+          - t23_lite_lsc-3215672
           - t31_lite_aceline-aip-o4
           - t31_lite_wansview-q5-2k
           - t31_lite_aoni-ep01j05
diff --git a/devices/t23_lite_jooan-a6m-u/br-ext-chip-ingenic/configs/t23_lite_jooan-a6m-u_defconfig b/devices/t23_lite_jooan-a6m-u/br-ext-chip-ingenic/configs/t23_lite_jooan-a6m-u_defconfig
new file mode 100644
index 0000000..f7eceab
--- /dev/null
+++ b/devices/t23_lite_jooan-a6m-u/br-ext-chip-ingenic/configs/t23_lite_jooan-a6m-u_defconfig
@@ -0,0 +1,69 @@
+# Architecture
+BR2_mipsel=y
+BR2_mips_xburst=y
+# BR2_MIPS_SOFT_FLOAT is not set
+BR2_MIPS_FP32_MODE_32=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/toolchain/toolchain.ingenic-t31.tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="mipsel-openipc-linux-musl"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/ingenic-t23.tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/t23.generic.config"
+BR2_LINUX_KERNEL_LZMA=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
+BR2_PACKAGE_WIREGUARD_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="ingenic"
+BR2_OPENIPC_SOC_MODEL="t23"
+BR2_OPENIPC_SOC_FAMILY="t23"
+BR2_OPENIPC_VARIANT="lite"
+BR2_OPENIPC_FLASH_SIZE="8"
+
+# Packages
+BR2_PACKAGE_ATBM_WIFI=y
+BR2_PACKAGE_BWM_NG=y
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_INGENIC_OSDRV_T23=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_JSONFILTER=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+BR2_PACKAGE_QUIRC_OPENIPC=y
+BR2_PACKAGE_VTUND_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y
diff --git a/devices/t23_lite_jooan-a6m-u/general/overlay/etc/rc.local b/devices/t23_lite_jooan-a6m-u/general/overlay/etc/rc.local
new file mode 100755
index 0000000..467c5a1
--- /dev/null
+++ b/devices/t23_lite_jooan-a6m-u/general/overlay/etc/rc.local
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+
+#(resetd.sh >/dev/null 2>&1) &
+#
+#(while true; do sleep 30; checker=$(pidof majestic); if [[ -z $checker ]]; then /etc/init.d/S95majestic start; fi; done) &
+
+
+exit 0
diff --git a/devices/t23_lite_jooan-a6m-u/general/overlay/etc/wireless/usb b/devices/t23_lite_jooan-a6m-u/general/overlay/etc/wireless/usb
new file mode 100755
index 0000000..da9b2f6
--- /dev/null
+++ b/devices/t23_lite_jooan-a6m-u/general/overlay/etc/wireless/usb
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+set_gpio() {
+	[ "$2" -eq 1 ] && gpio set $1 || gpio clear $1
+	sleep 1
+}
+
+# T23 JOOAN A6M-U
+if [ "$1" = "atbm601x-t23-jooan-a6m-u" ]; then
+	set_gpio 6 1
+	modprobe atbm6012b_wifi_usb
+	exit 0
+fi
+
+exit 1
diff --git a/devices/t23_lite_jooan-a6m-u/general/overlay/usr/sbin/resetd.sh b/devices/t23_lite_jooan-a6m-u/general/overlay/usr/sbin/resetd.sh
new file mode 100755
index 0000000..abe2b0e
--- /dev/null
+++ b/devices/t23_lite_jooan-a6m-u/general/overlay/usr/sbin/resetd.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+if [ -e /usr/share/openipc/gpio.conf ]; then
+        . /usr/share/openipc/gpio.conf
+fi
+
+
+[ -z $button ] && echo "GPIO pin for resetd is not set" | logger -t resetd && exit
+
+# Counter for button press until reset
+count=0
+
+# prepare the pin
+if [ ! -d /sys/class/gpio/gpio${button} ]; then
+	echo "${button}" > /sys/class/gpio/export
+	echo "in" > /sys/class/gpio/gpio${button}/direction
+fi
+
+# continuously monitor current value of reset switch
+while [ true ]; do
+	if [ "$(cat /sys/class/gpio/gpio${button}/value)" -eq 1 ]; then
+		count=0
+	else
+		count=$((count+1))
+		# 20 counts =~ 5 seconds @ 0.25 sleep intervals
+		if [ $count -eq 20 ]; then
+			#echo 'SET WIFI' | logger -t resetd
+			#fw_setenv wlanssid WIFI
+			#fw_setenv wlanpass 12345678
+			for a in $(seq 10) ; do (gpio toggle ${led1} ; sleep 0.3 ; gpio toggle ${led1} ; sleep 0.3) ; done >/dev/null 2>&1
+			echo 'RESETTING FIRMWARE' | logger -t resetd
+			firstboot
+		fi
+	fi
+	# This interval uses 1% CPU. Less sleep = more CPU
+	sleep 0.25
+done
diff --git a/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/customizer.sh b/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/customizer.sh
new file mode 100644
index 0000000..dfb17b1
--- /dev/null
+++ b/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/customizer.sh
@@ -0,0 +1,55 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/t23_lite_jooan-a6m-u-nor.tgz'
+#
+#
+# Set custom majestic settings
+#
+cli -s .video0.codec h264
+cli -s .nightMode.irCutPin1 49
+cli -s .nightMode.irCutPin2 50
+cli -s .nightMode.backlightPin 59
+cli -s .nightMode.monitorDelay 5
+cli -s .osd.enabled true
+cli -s .osd.template "OpenIPC | %F %T %Z"
+cli -s .audio.enabled true
+cli -s .audio.codec aac
+cli -s .audio.srate 48000
+cli -s .audio.volume 95
+cli -s .audio.gain 25
+cli -s .audio.outputEnabled true
+cli -s .audio.outputVolume 80
+cli -s .audio.speakerPin 63
+cli -s .audio.speakerPinInvert true
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev atbm601x-t23-jooan-a6m-u
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+#
+# Set osmem and rmem
+#
+fw_setenv osmem 45M@0x0
+fw_setenv rmem 19M@0x2D00000
+#
+#
+# Set motor and mmc
+#
+fw_setenv gpio_mmc 61
+#fw_setenv gpio_motors 53 52 54 14 17
+#
+#
+#adduser viewer -s /bin/false -D -H ; echo viewer:123456 | chpasswd
+#
+(sleep 3 ; reboot -f) &
+#
+
+exit 0
diff --git a/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/gpio.conf b/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/gpio.conf
new file mode 100644
index 0000000..cf0fd81
--- /dev/null
+++ b/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/gpio.conf
@@ -0,0 +1,13 @@
+alarm_in=-1
+alarm_out=-1
+button=62
+ircut1=49
+ircut2=50
+led1=-1
+led2=-1
+light_ir=59
+light_wl=60
+light_sensor=-1
+mmc_pwr=61
+speaker=63
+usb=6
diff --git a/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/muxes.sh b/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/muxes.sh
new file mode 100644
index 0000000..b249b04
--- /dev/null
+++ b/devices/t23_lite_jooan-a6m-u/general/overlay/usr/share/openipc/muxes.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+### set leds to off ###
+gpio clear 60
diff --git a/devices/t23_lite_jooan-a6m-u/general/scripts/excludes/t23_lite.list b/devices/t23_lite_jooan-a6m-u/general/scripts/excludes/t23_lite.list
new file mode 100644
index 0000000..95850ab
--- /dev/null
+++ b/devices/t23_lite_jooan-a6m-u/general/scripts/excludes/t23_lite.list
@@ -0,0 +1,32 @@
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/i2c/algos/i2c-algo-bit.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/i2c/busses/i2c-gpio.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/cdc_ether.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/rndis_host.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/usbnet.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/option.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/usb_wwan.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/usbserial.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/fs/f2fs/f2fs.ko
+#
+/etc/sensor/gc2053-t23.bin
+/etc/sensor/gc2053.yaml
+/etc/sensor/imx327-t23.bin
+/etc/sensor/imx327.yaml
+/etc/sensor/jxf23-t23.bin
+/etc/sensor/jxf23.yaml
+/etc/sensor/jxf37pa-t23.bin
+/etc/sensor/jxf37pa.yaml
+/etc/sensor/jxh63p-t23.bin
+/etc/sensor/jxh63p.yaml
+#/etc/sensor/sc1346-t23.bin
+#/etc/sensor/sc1346.yaml
+#/etc/sensor/sc1a4t-t23.bin
+#/etc/sensor/sc1a4t.yaml
+/etc/sensor/sc200ai-t23.bin
+/etc/sensor/sc200ai.yaml
+/etc/sensor/sc2310-t23.bin
+/etc/sensor/sc2310.yaml
+/etc/sensor/sc2331-t23.bin
+/etc/sensor/sc2331.yaml
+/etc/sensor/sc301IoT-t23.bin
+/etc/sensor/sc301IoT.yaml
diff --git a/devices/t23_lite_jooan-q3r-u/br-ext-chip-ingenic/configs/t23_lite_jooan-q3r-u_defconfig b/devices/t23_lite_jooan-q3r-u/br-ext-chip-ingenic/configs/t23_lite_jooan-q3r-u_defconfig
new file mode 100644
index 0000000..6998eda
--- /dev/null
+++ b/devices/t23_lite_jooan-q3r-u/br-ext-chip-ingenic/configs/t23_lite_jooan-q3r-u_defconfig
@@ -0,0 +1,70 @@
+# Architecture
+BR2_mipsel=y
+BR2_mips_xburst=y
+# BR2_MIPS_SOFT_FLOAT is not set
+BR2_MIPS_FP32_MODE_32=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/toolchain/toolchain.ingenic-t31.tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="mipsel-openipc-linux-musl"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/ingenic-t23.tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/t23.generic.config"
+BR2_LINUX_KERNEL_LZMA=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
+BR2_PACKAGE_WIREGUARD_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="ingenic"
+BR2_OPENIPC_SOC_MODEL="t23"
+BR2_OPENIPC_SOC_FAMILY="t23"
+BR2_OPENIPC_VARIANT="lite"
+BR2_OPENIPC_FLASH_SIZE="8"
+
+# Packages
+BR2_PACKAGE_ATBM_WIFI=y
+BR2_PACKAGE_BWM_NG=y
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_GPIO_MOTORS=y
+BR2_PACKAGE_INGENIC_OSDRV_T23=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_JSONFILTER=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+BR2_PACKAGE_QUIRC_OPENIPC=y
+BR2_PACKAGE_VTUND_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y
diff --git a/devices/t23_lite_jooan-q3r-u/general/overlay/etc/rc.local b/devices/t23_lite_jooan-q3r-u/general/overlay/etc/rc.local
new file mode 100755
index 0000000..467c5a1
--- /dev/null
+++ b/devices/t23_lite_jooan-q3r-u/general/overlay/etc/rc.local
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+
+#(resetd.sh >/dev/null 2>&1) &
+#
+#(while true; do sleep 30; checker=$(pidof majestic); if [[ -z $checker ]]; then /etc/init.d/S95majestic start; fi; done) &
+
+
+exit 0
diff --git a/devices/t23_lite_jooan-q3r-u/general/overlay/etc/wireless/usb b/devices/t23_lite_jooan-q3r-u/general/overlay/etc/wireless/usb
new file mode 100755
index 0000000..da9b2f6
--- /dev/null
+++ b/devices/t23_lite_jooan-q3r-u/general/overlay/etc/wireless/usb
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+set_gpio() {
+	[ "$2" -eq 1 ] && gpio set $1 || gpio clear $1
+	sleep 1
+}
+
+# T23 JOOAN A6M-U
+if [ "$1" = "atbm601x-t23-jooan-a6m-u" ]; then
+	set_gpio 6 1
+	modprobe atbm6012b_wifi_usb
+	exit 0
+fi
+
+exit 1
diff --git a/devices/t23_lite_jooan-q3r-u/general/overlay/usr/sbin/resetd.sh b/devices/t23_lite_jooan-q3r-u/general/overlay/usr/sbin/resetd.sh
new file mode 100755
index 0000000..abe2b0e
--- /dev/null
+++ b/devices/t23_lite_jooan-q3r-u/general/overlay/usr/sbin/resetd.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+if [ -e /usr/share/openipc/gpio.conf ]; then
+        . /usr/share/openipc/gpio.conf
+fi
+
+
+[ -z $button ] && echo "GPIO pin for resetd is not set" | logger -t resetd && exit
+
+# Counter for button press until reset
+count=0
+
+# prepare the pin
+if [ ! -d /sys/class/gpio/gpio${button} ]; then
+	echo "${button}" > /sys/class/gpio/export
+	echo "in" > /sys/class/gpio/gpio${button}/direction
+fi
+
+# continuously monitor current value of reset switch
+while [ true ]; do
+	if [ "$(cat /sys/class/gpio/gpio${button}/value)" -eq 1 ]; then
+		count=0
+	else
+		count=$((count+1))
+		# 20 counts =~ 5 seconds @ 0.25 sleep intervals
+		if [ $count -eq 20 ]; then
+			#echo 'SET WIFI' | logger -t resetd
+			#fw_setenv wlanssid WIFI
+			#fw_setenv wlanpass 12345678
+			for a in $(seq 10) ; do (gpio toggle ${led1} ; sleep 0.3 ; gpio toggle ${led1} ; sleep 0.3) ; done >/dev/null 2>&1
+			echo 'RESETTING FIRMWARE' | logger -t resetd
+			firstboot
+		fi
+	fi
+	# This interval uses 1% CPU. Less sleep = more CPU
+	sleep 0.25
+done
diff --git a/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/customizer.sh b/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/customizer.sh
new file mode 100644
index 0000000..a6f3645
--- /dev/null
+++ b/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/customizer.sh
@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/t23_lite_jooan-q3r-u-nor.tgz'
+#
+#
+# Set custom majestic settings
+#
+cli -s .video0.codec h264
+cli -s .nightMode.irCutPin1 49
+cli -s .nightMode.irCutPin2 50
+cli -s .nightMode.backlightPin 59
+cli -s .nightMode.monitorDelay 5
+cli -s .osd.enabled true
+cli -s .osd.template "OpenIPC | %F %T %Z"
+cli -s .audio.enabled true
+cli -s .audio.codec aac
+cli -s .audio.srate 48000
+cli -s .audio.volume 95
+cli -s .audio.gain 25
+cli -s .audio.outputEnabled true
+cli -s .audio.outputVolume 80
+cli -s .audio.speakerPin 63
+cli -s .audio.speakerPinInvert true
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev atbm601x-t23-jooan-a6m-u
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+#
+# Set osmem and rmem
+#
+fw_setenv osmem 45M@0x0
+fw_setenv rmem 19M@0x2D00000
+#
+# Set motor and mmc
+#
+fw_setenv gpio_mmc 61
+fw_setenv gpio_motors 53 52 54 14 17
+#
+#
+#adduser viewer -s /bin/false -D -H ; echo viewer:123456 | chpasswd
+#
+(sleep 3 ; reboot -f) &
+#
+
+exit 0
diff --git a/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/gpio.conf b/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/gpio.conf
new file mode 100644
index 0000000..cf0fd81
--- /dev/null
+++ b/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/gpio.conf
@@ -0,0 +1,13 @@
+alarm_in=-1
+alarm_out=-1
+button=62
+ircut1=49
+ircut2=50
+led1=-1
+led2=-1
+light_ir=59
+light_wl=60
+light_sensor=-1
+mmc_pwr=61
+speaker=63
+usb=6
diff --git a/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/muxes.sh b/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/muxes.sh
new file mode 100644
index 0000000..b249b04
--- /dev/null
+++ b/devices/t23_lite_jooan-q3r-u/general/overlay/usr/share/openipc/muxes.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+### set leds to off ###
+gpio clear 60
diff --git a/devices/t23_lite_jooan-q3r-u/general/scripts/excludes/t23_lite.list b/devices/t23_lite_jooan-q3r-u/general/scripts/excludes/t23_lite.list
new file mode 100644
index 0000000..95850ab
--- /dev/null
+++ b/devices/t23_lite_jooan-q3r-u/general/scripts/excludes/t23_lite.list
@@ -0,0 +1,32 @@
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/i2c/algos/i2c-algo-bit.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/i2c/busses/i2c-gpio.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/cdc_ether.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/rndis_host.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/usbnet.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/option.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/usb_wwan.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/usbserial.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/fs/f2fs/f2fs.ko
+#
+/etc/sensor/gc2053-t23.bin
+/etc/sensor/gc2053.yaml
+/etc/sensor/imx327-t23.bin
+/etc/sensor/imx327.yaml
+/etc/sensor/jxf23-t23.bin
+/etc/sensor/jxf23.yaml
+/etc/sensor/jxf37pa-t23.bin
+/etc/sensor/jxf37pa.yaml
+/etc/sensor/jxh63p-t23.bin
+/etc/sensor/jxh63p.yaml
+#/etc/sensor/sc1346-t23.bin
+#/etc/sensor/sc1346.yaml
+#/etc/sensor/sc1a4t-t23.bin
+#/etc/sensor/sc1a4t.yaml
+/etc/sensor/sc200ai-t23.bin
+/etc/sensor/sc200ai.yaml
+/etc/sensor/sc2310-t23.bin
+/etc/sensor/sc2310.yaml
+/etc/sensor/sc2331-t23.bin
+/etc/sensor/sc2331.yaml
+/etc/sensor/sc301IoT-t23.bin
+/etc/sensor/sc301IoT.yaml
diff --git a/devices/t23_lite_lsc-3215672/br-ext-chip-ingenic/configs/t23_lite_lsc-3215672_defconfig b/devices/t23_lite_lsc-3215672/br-ext-chip-ingenic/configs/t23_lite_lsc-3215672_defconfig
new file mode 100644
index 0000000..d2f2490
--- /dev/null
+++ b/devices/t23_lite_lsc-3215672/br-ext-chip-ingenic/configs/t23_lite_lsc-3215672_defconfig
@@ -0,0 +1,70 @@
+# Architecture
+BR2_mipsel=y
+BR2_mips_xburst=y
+# BR2_MIPS_SOFT_FLOAT is not set
+BR2_MIPS_FP32_MODE_32=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/toolchain/toolchain.ingenic-t31.tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="mipsel-openipc-linux-musl"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/ingenic-t23.tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/t23.generic.config"
+BR2_LINUX_KERNEL_LZMA=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
+BR2_PACKAGE_WIREGUARD_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="ingenic"
+BR2_OPENIPC_SOC_MODEL="t23"
+BR2_OPENIPC_SOC_FAMILY="t23"
+BR2_OPENIPC_SNS_MODEL="sc2331"
+BR2_OPENIPC_VARIANT="lite"
+BR2_OPENIPC_FLASH_SIZE="8"
+
+# Packages
+BR2_PACKAGE_ATBM_WIFI=y
+BR2_PACKAGE_BWM_NG=y
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_INGENIC_OSDRV_T23=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_JSONFILTER=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+BR2_PACKAGE_QUIRC_OPENIPC=y
+BR2_PACKAGE_VTUND_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y
diff --git a/devices/t23_lite_lsc-3215672/general/overlay/etc/rc.local b/devices/t23_lite_lsc-3215672/general/overlay/etc/rc.local
new file mode 100755
index 0000000..6b14b7d
--- /dev/null
+++ b/devices/t23_lite_lsc-3215672/general/overlay/etc/rc.local
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+
+(resetd.sh >/dev/null 2>&1) &
+#
+(while true; do sleep 30; checker=$(pidof majestic); if [[ -z $checker ]]; then /etc/init.d/S95majestic start; fi; done) &
+
+
+exit 0
diff --git a/devices/t23_lite_lsc-3215672/general/overlay/etc/wireless/usb b/devices/t23_lite_lsc-3215672/general/overlay/etc/wireless/usb
new file mode 100755
index 0000000..d3977ec
--- /dev/null
+++ b/devices/t23_lite_lsc-3215672/general/overlay/etc/wireless/usb
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+set_gpio() {
+	[ "$2" -eq 1 ] && gpio set $1 || gpio clear $1
+	sleep 1
+}
+
+# T23 LSC 3215672
+if [ "$1" = "atbm601x-t23-lsc-3215672" ]; then
+	set_gpio 62 0
+	modprobe atbm6012b_wifi_usb
+	exit 0
+fi
+
+exit 1
diff --git a/devices/t23_lite_lsc-3215672/general/overlay/usr/sbin/resetd.sh b/devices/t23_lite_lsc-3215672/general/overlay/usr/sbin/resetd.sh
new file mode 100755
index 0000000..abe2b0e
--- /dev/null
+++ b/devices/t23_lite_lsc-3215672/general/overlay/usr/sbin/resetd.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+if [ -e /usr/share/openipc/gpio.conf ]; then
+        . /usr/share/openipc/gpio.conf
+fi
+
+
+[ -z $button ] && echo "GPIO pin for resetd is not set" | logger -t resetd && exit
+
+# Counter for button press until reset
+count=0
+
+# prepare the pin
+if [ ! -d /sys/class/gpio/gpio${button} ]; then
+	echo "${button}" > /sys/class/gpio/export
+	echo "in" > /sys/class/gpio/gpio${button}/direction
+fi
+
+# continuously monitor current value of reset switch
+while [ true ]; do
+	if [ "$(cat /sys/class/gpio/gpio${button}/value)" -eq 1 ]; then
+		count=0
+	else
+		count=$((count+1))
+		# 20 counts =~ 5 seconds @ 0.25 sleep intervals
+		if [ $count -eq 20 ]; then
+			#echo 'SET WIFI' | logger -t resetd
+			#fw_setenv wlanssid WIFI
+			#fw_setenv wlanpass 12345678
+			for a in $(seq 10) ; do (gpio toggle ${led1} ; sleep 0.3 ; gpio toggle ${led1} ; sleep 0.3) ; done >/dev/null 2>&1
+			echo 'RESETTING FIRMWARE' | logger -t resetd
+			firstboot
+		fi
+	fi
+	# This interval uses 1% CPU. Less sleep = more CPU
+	sleep 0.25
+done
diff --git a/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/customizer.sh b/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/customizer.sh
new file mode 100644
index 0000000..dce8c98
--- /dev/null
+++ b/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/customizer.sh
@@ -0,0 +1,51 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/t23_lite_lsc-3215672-nor.tgz'
+#
+#
+# Set custom majestic settings
+#
+cli -s .video0.codec h264
+cli -s .nightMode.irCutPin1 58
+cli -s .nightMode.irCutPin2 57
+cli -s .nightMode.backlightPin 61
+cli -s .nightMode.monitorDelay 5
+cli -s .nightMode.lightMonitor true
+cli -s .nightMode.minThreshold 10
+cli -s .nightMode.maxThreshold 100
+cli -s .osd.enabled true
+cli -s .osd.template "OpenIPC | %F %T %Z"
+cli -s .audio.enabled true
+cli -s .audio.codec aac
+cli -s .audio.srate 48000
+cli -s .audio.volume 95
+cli -s .audio.gain 25
+cli -s .audio.outputEnabled true
+cli -s .audio.outputVolume 80
+cli -s .audio.speakerPin 63
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev atbm601x-t23-lsc-3215672
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+#
+# Set osmem and rmem
+#
+fw_setenv osmem 45M@0x0
+fw_setenv rmem 19M@0x2D00000
+#
+#
+#adduser viewer -s /bin/false -D -H ; echo viewer:123456 | chpasswd
+#
+(sleep 3 ; reboot -f) &
+#
+
+exit 0
diff --git a/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/gpio.conf b/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/gpio.conf
new file mode 100644
index 0000000..290656c
--- /dev/null
+++ b/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/gpio.conf
@@ -0,0 +1,13 @@
+alarm_in=-1
+alarm_out=-1
+button=6
+ircut1=57
+ircut2=58
+led1=51
+led2=-1
+light_ir=61
+light_wl=-1
+light_sensor=-1
+mmc_pwr=-1
+speaker=63
+usb=62
diff --git a/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/muxes.sh b/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/muxes.sh
new file mode 100644
index 0000000..1ff2187
--- /dev/null
+++ b/devices/t23_lite_lsc-3215672/general/overlay/usr/share/openipc/muxes.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+### set leds to off ###
+gpio set 51
diff --git a/devices/t23_lite_lsc-3215672/general/scripts/excludes/t23_lite.list b/devices/t23_lite_lsc-3215672/general/scripts/excludes/t23_lite.list
new file mode 100644
index 0000000..7607787
--- /dev/null
+++ b/devices/t23_lite_lsc-3215672/general/scripts/excludes/t23_lite.list
@@ -0,0 +1,32 @@
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/i2c/algos/i2c-algo-bit.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/i2c/busses/i2c-gpio.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/cdc_ether.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/rndis_host.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/usbnet.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/option.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/usb_wwan.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/usbserial.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/fs/f2fs/f2fs.ko
+#
+#/etc/sensor/gc2053-t23.bin
+#/etc/sensor/gc2053.yaml
+#/etc/sensor/imx327-t23.bin
+#/etc/sensor/imx327.yaml
+#/etc/sensor/jxf23-t23.bin
+#/etc/sensor/jxf23.yaml
+#/etc/sensor/jxf37pa-t23.bin
+#/etc/sensor/jxf37pa.yaml
+#/etc/sensor/jxh63p-t23.bin
+#/etc/sensor/jxh63p.yaml
+#/etc/sensor/sc1346-t23.bin
+#/etc/sensor/sc1346.yaml
+#/etc/sensor/sc1a4t-t23.bin
+#/etc/sensor/sc1a4t.yaml
+#/etc/sensor/sc200ai-t23.bin
+#/etc/sensor/sc200ai.yaml
+#/etc/sensor/sc2310-t23.bin
+#/etc/sensor/sc2310.yaml
+#/etc/sensor/sc2331-t23.bin
+#/etc/sensor/sc2331.yaml
+#/etc/sensor/sc301IoT-t23.bin
+#/etc/sensor/sc301IoT.yaml