## Feature: Postgres stop timeout
Switchover/Failover operation hangs on signal_stop (or checkpoint) call when postmaster doesn't respond or hangs for some reason(Issue described in [1371](https://github.com/zalando/patroni/issues/1371)). This is leading to service loss for an extended period of time until the hung postmaster starts responding or it is killed by some other actor.
### master_stop_timeout
The number of seconds Patroni is allowed to wait when stopping Postgres and effective only when synchronous_mode is enabled. When set to > 0 and the synchronous_mode is enabled, Patroni sends SIGKILL to the postmaster if the stop operation is running for more than the value set by master_stop_timeout. Set the value according to your durability/availability tradeoff. If the parameter is not set or set <= 0, master_stop_timeout does not apply.
It is a regular issue that primary is recycling WALs when one of the replicas is down for a long time. So far there were only two solutions for such a problem and both of them are not perfect:
1. Increase `wal_keep_segments`, but it is hard to guess the good value.
2. Use continuous archiving and PITR, but it is not always possible.
This PR is introducing the way to solve the problem for static clusters, with a fixed number of nodes and names that never change. You just need to list the names of all nodes in the `slots` so the primary will not remove the slot when the node is down (not registered in DCS).
Of course, the primary will not create the permanent slot which is matching its own name.
Usage example: let's assume you have a cluster with nodes named *abc1*, *abc2*, and *abc3*.
You have to run `patronictl edit-config` and put the following snippet into the configuration:
```yaml
slots:
abc1:
type: physical
abc2:
type: physical
abc3:
type: physical
```
If the node *abc2* is the primary, it will always create slots for *abc1* and *abc3* even if they are not running, but will not create slot *abc2*.
Other nodes will behave the same.
Close#280
The previous documentation was wrong and will throw the following error
when used:
Exception when parsing list {[{"name": "postgresql", "port": 5432}]}
When removing the surrounding braces, the error goes away and the
endpoint is updated with the correct Port name.
* make it possible to use client certificates with REST API
* define a separate PatroniRequest class which handles all communication
* refactor patronictl to use the new class
* make Ha to use the new class instead of calling requests.get. The old call wasn't taking into account certificates and basic-auth
Close#898
A few times we observed that Patroni HA loop was blocked for a few minutes due to not being able to write logs to stderr. This is a very rare condition which we hit so far only on k8s. This commit makes Patroni resilient to such kind of problems. All log messages first are written into the in-memory queue and later they are asynchronously flushed into the stderr or file from a separate thread.
The maximum queue size is configurable and the default value is 1000. This should be enough to keep more than one hour of log messages with default settings and when Patroni cluster operates normally (without big issues).
In case if we hit the maximum size of the queue further logs will be discarded until the queue size will be reduced. The number of discarded messages will be reported into the log later.
In addition to that, the number of non-flushed and discarded messages (if there are any), will be reported via Patroni REST API as:
```json
"logger_queue_size": X,
"logger_records_lost": Y`
```
* expose the current patroni version in DCS
* expose `checkpoint_after_promote` flag in DCS as an indicator that pg_rewind could be safely executed
* other nodes will wait until this flag is set instead of connecting as superuser and issuing the CHECKPOINT
* define `postgresql.authention.rewind` with credentials for pg_rewind in patroni configuration files.
* create user for pg_rewind if postgres is 11+
* grant execute on functions required for pg_rewind to rewind user
This functionality works similarly to the `pg_hba`:
If the `postgresql.pg_ident` is defined in the config file or DCS, Patroni will write its value to pg_ident.conf, however, if `postgresql.parameters.ident_file` is defined, Patroni will assume that pg_ident is managed from outside and not update the file.
Recently released psycopg2 split into two different packages, psycopg2, and psycopg2-binary which could be installed at the same time into the same place on the filesystem. In order to decrease dependency hell problem, we let a user choose how to install psycopg2. There are a few options available and it is reflected in the documentation.
This PR also changes the following behavior:
* `pip install patroni` will fail if psycopg2 is not installed
* Patroni will check psycopg2 upon start and fail if it can't be found or outdated.
Closes https://github.com/zalando/patroni/issues/1021
First of all, this patch changes the behavior of `on_start`/`on_restart` callbacks, they will be called only when postgres is started or restarted without role changes. In case if the member is promoted or demoted only the `on_role_change` callback will be executed. `on_role_change` was never called for standby leader, only `on_start`/`on_restart` and with a wrong role argument.
Before that `on_role_change` was never called for standby leader, only `on_start`/`on_restart` and with a wrong role argument.
In addition to that, the REST API will return standby_leader role for the leader of the standby cluster.
Closes https://github.com/zalando/patroni/issues/988
if the `etcd.use_proxies` is set to true, Patroni will stick to the list of hosts specified in the `etcd.hosts` and avoid doing topology discovery. Such mode might be useful when you know that you connect to the etcd cluster via the set of proxies or when th etcd cluster has static topology.
If the pg_rewind is disabled or can't be used, the former master could fail to start as a new replica due to diverged timelines. In this case, the only way to fix it is wiping the data directory and reinitializing.
So far Patroni was able to remove the data directory only after failed attempt to run pg_rewind. This commit fixes it.
If the `postgresql.remove_data_directory_on_diverged_timelines` is set, Patroni will wipe the data directory and reinitialize the former master automatically.
Fixes: https://github.com/zalando/patroni/issues/941
The latest timeline is calculated from the `/history` key in DCS. In case there is no such key or it contains some garbage we consider the node healthy.
Closes https://github.com/zalando/patroni/issues/890
It allows changing logging settings in runtime by updating config and doing reload or sending `SIGHUP` to the Patroni process.
Important! Environment configuration names related to logging were renamed and documentation accordingly updated. For compatibility reasons Patroni still accepts `PATRONI_LOGLEVEL` and `PATRONI_FORMAT`, but some other variables related to logging, which were introduced only
recently (between releases), will stop working. I think it is ok, since we didn't release the new version yet and therefore it is very unlikely that somebody is using them except authors of corresponding PRs.
Example of log section in the config file:
```yaml
log:
dir: /where/to/write/patroni/logs # if not specified, write logs to stderr
file_size: 50000000 # 50MB
file_num: 10 # keep history of 10 files
dateformat: '%Y-%m-%d %H:%M:%S'
loggers: # increase log verbosity for etcd.client and urllib3
etcd.client: DEBUG
urllib3: DEBUG
```
It gives users the option to send Patroni application logs to a File instead of Standard Out. There are three environment variables that can be set to enable and configure file logging.
1. `PATRONI_FILE_LOG_DIR`: Path to a directory that is writeable by the executing user. Having this variable set is what activates file logging.
2. `PATRONI_FILE_LOG_NUM`: This is a rolling file logger. This variable dictates how many log files are retained.
3. `PATRONI_FILE_LOG_SIZE`: This variable dictates the size at which the logs will roll.
If `PATRONI_FILE_LOG_DIR` is not set than Patroni will log to stderr (default behavior does not change)
Closes https://github.com/zalando/patroni/issues/902
