diff --git a/feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network b/feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network index 61019712..8ded2d8e 100755 --- a/feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network +++ b/feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network @@ -135,6 +135,12 @@ qcom_setup_interfaces() ucidef_add_switch_attr "switch1" "enable" "false" ucidef_add_switch_attr "switch1" "reset" "true" ;; + wallys,dr5018) + ucidef_set_interface_lan "eth0 eth1" + ucidef_add_switch "switch1" + ucidef_add_switch_attr "switch1" "enable" "false" + ucidef_add_switch_attr "switch1" "reset" "true" + ;; yuncore,fap655) ucidef_add_switch "switch1" \ "6@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" @@ -241,6 +247,13 @@ qcom_setup_macs() wan_mac=$(cat /sys/class/net/eth0/address) lan_mac=$(macaddr_add "$wan_mac" 1) ;; + wallys,dr5018) + mac=$(grep -i -m 1 BaseMacAddress= /dev/`cat /proc/mtd | grep APPSBLENV | cut -d: -f1` | cut -d= -f2) + [ -z "$mac"] && mac="00:11:22:33:44:00" + wan_mac=$(macaddr_canonicalize $mac) + ucidef_set_network_device_mac eth0 $wan_mac + ucidef_set_label_macaddr $wan_mac + ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac diff --git a/feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata b/feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata index 46e050eb..7cd81a6f 100755 --- a/feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata +++ b/feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata @@ -162,6 +162,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin) cybertan,eww622-a1|\ cybertan,eww631-a1|\ cybertan,eww631-b1|\ + wallys,dr5018|\ edgecore,eap104|\ yuncore,fap655|\ hfcl,ion4xi_w|\ @@ -179,6 +180,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin) ath11k/qcn6122/hw1.0/caldata_1.bin) case "$board" in cig,wf186w|\ + wallys,dr5018|\ hfcl,ion4xi_w|\ hfcl,ion4x_w|\ hfcl,ion4xi_HMR|\ @@ -193,6 +195,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin) ath11k/qcn6122/hw1.0/caldata_2.bin) case "$board" in motorola,q14|\ + wallys,dr5018|\ cybertan,eww631-a1|\ cybertan,eww631-b1|\ edgecore,eap104|\ diff --git a/feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh b/feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh index 2f6e7e87..11bf943e 100755 --- a/feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh +++ b/feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh @@ -125,6 +125,7 @@ platform_check_image() { indio,um-310ax-v1|\ indio,um-510axp-v1|\ indio,um-510axm-v1|\ + wallys,dr5018|\ wallys,dr6018|\ wallys,dr6018-v4|\ edgecore,eap101|\ @@ -197,6 +198,7 @@ platform_do_upgrade() { xunison,d50|\ xunison,d50-5g|\ qcom,ipq5018-mp03.3|\ + wallys,dr5018|\ wallys,dr6018|\ wallys,dr6018-v4|\ yuncore,fap650|\ diff --git a/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-wallys-dr5018.dts b/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-wallys-dr5018.dts new file mode 100755 index 00000000..4f87b630 --- /dev/null +++ b/feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-wallys-dr5018.dts @@ -0,0 +1,10 @@ +#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-wallys-dr5018.dts" + +/ { + model = "Wallys DR5018"; + compatible = "wallys,dr5018", "qcom,ipq5018"; + + pmuv8: pmu { + compatible = "arm,cortex-a7-pmu"; + }; +}; diff --git a/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-wallys-dr5018.dts b/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-wallys-dr5018.dts new file mode 100755 index 00000000..49f4a8c8 --- /dev/null +++ b/feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-wallys-dr5018.dts @@ -0,0 +1,984 @@ +/dts-v1/; +/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "qcom-ipq5018.dtsi" + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1"; + compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018"; + interrupt-parent = <&intc>; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + AUTO_MOUNT; + #endif + + aliases { + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + ethernet0 = "/soc/dp1"; + ethernet1 = "/soc/dp2"; + }; + + chosen { + bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + bootargs-append = " swiotlb=1"; + #else + bootargs-append = " swiotlb=1 coherent_pool=2M"; + #endif + stdout-path = "serial0"; + }; + + reserved-memory { + #ifdef __IPQ_MEM_PROFILE_256_MB__ + /* 256 MB Profile + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 8MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x40800000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 13MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D100000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D300000 | 15MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E200000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E300000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4E400000 | 15MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4F300000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4F400000 | 1MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x4500000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x1400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xD00000>; + }; + + m3_dump: m3_dump@4D100000 { + no-map; + reg = <0x0 0x4D100000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0xF00000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 { + no-map; + reg = <0x0 0x4E200000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 { + no-map; + reg = <0x0 0x4E300000 0x0 0x100000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E400000 { + no-map; + reg = <0x0 0x4E400000 0x0 0xF00000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 { + no-map; + reg = <0x0 0x4F300000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 { + no-map; + reg = <0x0 0x4F400000 0x0 0x100000>; + }; + #else + /* 512MB/1GB Profiles + * +==========+==============+=========================+ + * | | | | + * | Region | Start Offset | Size | + * | | | | + * +----------+--------------+-------------------------+ + * | NSS | 0x40000000 | 16MB | + * +----------+--------------+-------------------------+ + * | Linux | 0x41000000 | Depends on total memory | + * +----------+--------------+-------------------------+ + * | uboot | 0x4A600000 | 4MB | + * +----------+--------------+-------------------------+ + * | SBL | 0x4AA00000 | 1MB | + * +----------+--------------+-------------------------+ + * | smem | 0x4AB00000 | 1MB | + * +----------+--------------+-------------------------+ + * | TZ | 0x4AC00000 | 4MB | + * +----------+--------------+-------------------------+ + * | Q6 | | | + * | code/ | 0x4B000000 | 20MB | + * | data | | | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | data | 0x4C400000 | 14MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | M3 Dump | 0x4D200000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | QDSS | 0x4D300000 | 1MB | + * +----------+--------------+-------------------------+ + * | IPQ5018 | | | + * | Caldb | 0x4D400000 | 2MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | data | 0x4D600000 | 16MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | M3 Dump | 0x4E600000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | QDSS | 0x4E700000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_1| | | + * | Caldb | 0x4E800000 | 5MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | data | 0x4ED00000 | 16MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | M3 Dump | 0x4FD00000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | QDSS | 0x4FE00000 | 1MB | + * +----------+--------------+-------------------------+ + * | QCN6122_2| | | + * | Caldb | 0x4FF00000 | 5MB | + * +----------+--------------+-------------------------+ + * | | + * | Rest of the memory for Linux | + * | | + * +===================================================+ + */ + q6_mem_regions: q6_mem_regions@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 0x5400000>; + }; + + q6_code_data: q6_code_data@4B000000 { + no-map; + reg = <0x0 0x4B000000 0x0 01400000>; + }; + + q6_ipq5018_data: q6_ipq5018_data@4C400000 { + no-map; + reg = <0x0 0x4C400000 0x0 0xE00000>; + }; + + m3_dump: m3_dump@4D200000 { + no-map; + reg = <0x0 0x4D200000 0x0 0x100000>; + }; + + q6_etr_region: q6_etr_dump@4D300000 { + no-map; + reg = <0x0 0x4D300000 0x0 0x100000>; + }; + + q6_caldb_region: q6_caldb_region@4D400000 { + no-map; + reg = <0x0 0x4D400000 0x0 0x200000>; + }; + + q6_qcn6122_data1: q6_qcn6122_data1@4D600000 { + no-map; + reg = <0x0 0x4D600000 0x0 0x1000000>; + }; + + m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 { + no-map; + reg = <0x0 0x4E600000 0x0 0x100000>; + }; + + q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 { + no-map; + reg = <0x0 0x4E700000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 { + no-map; + reg = <0x0 0x4E800000 0x0 0x500000>; + }; + + q6_qcn6122_data2: q6_qcn6122_data2@4E900000 { + no-map; + reg = <0x0 0x4ED00000 0x0 0x1000000>; + }; + + m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 { + no-map; + reg = <0x0 0x4FD00000 0x0 0x100000>; + }; + + q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 { + no-map; + reg = <0x0 0x4FE00000 0x0 0x100000>; + }; + + q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 { + no-map; + reg = <0x0 0x4FF00000 0x0 0x500000>; + }; + + #endif + }; + + soc { + serial@78af000 { + status = "ok"; + }; + + blsp1_uart2: serial@78b0000 { + pinctrl-0 = <&blsp1_uart_pins>; + pinctrl-names = "default"; + }; + + qpic_bam: dma@7984000{ + status = "ok"; + }; + + nand: qpic-nand@79b0000 { + pinctrl-0 = <&qspi_nand_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + spi_0: spi@78b5000 { /* BLSP1 QUP0 */ + pinctrl-0 = <&blsp0_spi_pins>; + pinctrl-names = "default"; + cs-select = <0>; + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + linux,modalias = "m25p80", "n25q128a11"; + spi-max-frequency = <50000000>; + use-default-sizes; + }; + }; + + mdio0: mdio@88000 { + status = "ok"; + + ethernet-phy@0 { + reg = <7>; + }; + }; + + mdio1: mdio@90000 { + status = "ok"; + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + phy-reset-gpio = <&tlmm 39 0>; + + ethernet-phy@0 { + reg = <0>; + }; + ethernet-phy@1 { + reg = <1>; + }; + ethernet-phy@2 { + reg = <2>; + }; + ethernet-phy@3 { + reg = <3>; + }; + + }; + + ess-instance { + num_devices = <0x2>; + ess-switch@0x39c00000 { + compatible = "qcom,ess-switch-ipq50xx"; + device_id = <0>; + switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ + cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <7>; + }; + + port@1 { + port_id = <2>; + forced-speed = <1000>; + forced-duplex = <1>; + }; + }; + led_source@0 { + source = <0>; + mode = "normal"; + speed = "all"; + blink_en = "enable"; + active = "high"; + }; + }; + + ess-switch1@1 { + compatible = "qcom,ess-switch-qca83xx"; + device_id = <1>; + switch_access_mode = "mdio"; + mdio-bus = <&mdio1>; + reset_gpio = <0x27>; + switch_cpu_bmp = <0x40>; + switch_lan_bmp = <0x1e>; + switch_wan_bmp = <0x0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 + 0x00008 0x1000000 + 0x0000c 0x80 + 0x00010 0x2613a0 + 0x000e4 0xaa545 + 0x000e0 0xc74164de + 0x0007c 0x4e + 0x00094 0x4e + >; + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <0>; + }; + port@1 { + port_id = <2>; + phy_address = <1>; + }; + port@2 { + port_id = <3>; + phy_address = <2>; + }; + port@3 { + port_id = <4>; + phy_address = <3>; + }; + }; + }; + + }; + + wifi0: wifi@c000000 { + qcom,bdf-addr = <0x4BA00000 0x4BA00000 0x4BA00000 + 0x0 0x0>; + qcom,caldb-addr = <0x4CA00000 0x4CA00000 0x4CA00000 + 0x0 0x0>; + qcom,caldb-size = <0x200000>; + status = "ok"; + }; + + ess-uniphy@98000 { + status = "ok"; + }; + + qcom,sps { + status = "ok"; + }; + + qcom,usbbam@8B04000 { + status = "ok"; + }; + + qcom,diag@0 { + status = "ok"; + }; + + dp1 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <1>; + reg = <0x39C00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + qcom,link-poll = <1>; + qcom,phy-mdio-addr = <7>; + mdio-bus = <&mdio0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + }; + + dp2 { + device_type = "network"; + compatible = "qcom,nss-dp"; + clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + qcom,id = <2>; + reg = <0x39D00000 0x10000>; + interrupts = ; + qcom,mactype = <2>; + /* qcom,link-poll = <1>; + qcom,phy-mdio-addr = <0 1 2 3>; + mdio-bus = <&mdio1>; */ + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + }; + + qcom,test@0 { + status = "ok"; + }; + + lpass: lpass@0xA000000{ + status = "disabled"; + }; + + pcm: pcm@0xA3C0000{ + pinctrl-0 = <&audio_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + pcm_lb: pcm_lb@0 { + status = "disabled"; + }; + }; + + thermal-zones { + status = "ok"; + }; +}; + +&tlmm { + pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>; + pinctrl-names = "default"; + + blsp0_uart_pins: blsp0_uart_pins { + blsp0_uart_rx_tx { + pins = "gpio20", "gpio21"; + function = "blsp0_uart0"; + bias-disable; + }; + }; + + blsp1_uart_pins: blsp1_uart_pins { + blsp1_uart_rx_tx { + pins = "gpio23", "gpio25", "gpio24", "gpio26"; + function = "blsp1_uart2"; + bias-disable; + }; + }; + + blsp0_spi_pins: blsp0_spi_pins { + mux { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-disable; + }; + }; + + qspi_nand_pins: qspi_nand_pins { + qspi_clock { + pins = "gpio9"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + qspi_cs { + pins = "gpio8"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + qspi_data_0 { + pins = "gpio7"; + function = "qspi0"; + drive-strength = <8>; + bias-disable; + }; + qspi_data_1 { + pins = "gpio6"; + function = "qspi1"; + drive-strength = <8>; + bias-disable; + }; + qspi_data_2 { + pins = "gpio5"; + function = "qspi2"; + drive-strength = <8>; + bias-disable; + }; + qspi_data_3 { + pins = "gpio4"; + function = "qspi3"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdio1_pins: mdio_pinmux { + mux_0 { + pins = "gpio36"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mux_1 { + pins = "gpio37"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + phy_led_pins: phy_led_pins { + gephy_led_pin { + pins = "gpio46"; + function = "led0"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + i2c_pins: i2c_pins { + i2c_scl { + pins = "gpio25"; + function = "blsp2_i2c1"; + drive-strength = <8>; + bias-disable; + }; + + i2c_sda { + pins = "gpio26"; + function = "blsp2_i2c1"; + drive-strength = <8>; + bias-disable; + }; + }; + + button_pins: button_pins { + reset_button { + pins = "gpio28"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + audio_pins: audio_pinmux { + mux_1 { + pins = "gpio24"; + function = "audio_rxbclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_2 { + pins = "gpio25"; + function = "audio_rxfsync"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_3 { + pins = "gpio26"; + function = "audio_rxd"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_4 { + pins = "gpio27"; + function = "audio_txmclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_5 { + pins = "gpio28"; + function = "audio_txbclk"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_6 { + pins = "gpio29"; + function = "audio_txfsync"; + drive-strength = <8>; + bias-pull-down; + }; + + mux_7 { + pins = "gpio30"; + function = "audio_txd"; + drive-strength = <8>; + bias-pull-down; + }; + }; + leds_pins: leds_pinmux { + sys_blue { + pins = "gpio30"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + sys_red { + pins = "gpio36"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + sys_green { + pins = "gpio37"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; +}; + +&soc { + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&tlmm 28 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led@30 { + label = "sys:blue"; + gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; /* GPIO_30 */ + default-state="on"; + /* linux,default-trigger = "timer"; + active-delay = <700>; + inactive-delay = <700>; + default-state="on"; */ + }; + led@36 { + label = "sys:red"; + gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; /* GPIO_36 */ + default-state="off"; + /* linux,default-trigger = "timer"; + active-delay = <700>; + inactive-delay = <700>; + default-state="on"; */ + }; + led@37 { + label = "sys:green"; + gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; /* GPIO_37 */ + default-state="off"; + /* linux,default-trigger = "timer"; + active-delay = <700>; + inactive-delay = <700>; + default-state="on"; */ + }; + }; + +}; + +&usb3 { + status = "disabled"; + device-power-gpio = <&tlmm 24 1>; +}; + +&eud { + status = "ok"; +}; + +&pcie_x1 { + status = "disabled"; + perst-gpio = <&tlmm 18 1>; +}; + +&pcie_x2 { + status = "disabled"; + perst-gpio = <&tlmm 15 1>; +}; + +&bt { + status = "ok"; +}; + +&dwc_0 { + /delete-property/ #phy-cells; + /delete-property/ phys; + /delete-property/ phy-names; +}; + +&hs_m31phy_0 { + status = "ok"; +}; + +&pcie_x1phy { + status = "disabled"; +}; + +&pcie_x2phy { + status = "disabled"; +}; + +&pcie_x1_rp { + status = "disabled"; + + mhi_0: qcom,mhi@0 { + reg = <0 0 0 0 0 >; + }; +}; + +&pcie_x2_rp { + status = "disabled"; + + mhi_1: qcom,mhi@1 { + reg = <0 0 0 0 0 >; + + }; +}; + +&qfprom { + status = "ok"; +}; + +&tsens { + status = "ok"; +}; + +&qcom_q6v5_wcss { + qcom,multipd_arch; + memory-region = <&q6_mem_regions>; + qcom,share_bootargs; + qcom,bootargs_smem = <507>; + boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>, + <0x2 0x4 0x2 0x12 0x0 0x0>; + /* IPQ5018 */ + q6v5_wcss_userpd1 { + m3_firmware = "IPQ5018/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 8 0>, + <&wcss_smp2p_in 9 0>, + <&wcss_smp2p_in 12 0>, + <&wcss_smp2p_in 11 0>; + interrupt-names ="fatal", + "ready", + "spawn_ack", + "stop-ack"; + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + qca,asid = <1>; + qca,auto-restart; + qca,int_radio; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>; + #else + memory-region = <&q6_ipq5018_data>, <&m3_dump>, + <&q6_etr_region>, <&q6_caldb_region>; + #endif + }; + + /* QCN6122 6G */ + q6v5_wcss_userpd2 { + m3_firmware = "qcn6122/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 16 0>, + <&wcss_smp2p_in 17 0>, + <&wcss_smp2p_in 20 0>, + <&wcss_smp2p_in 19 0>; + interrupt-names ="fatal", + "ready", + "spawn_ack", + "stop-ack"; + qcom,smem-states = <&wcss_smp2p_out 16>, + <&wcss_smp2p_out 17>, + <&wcss_smp2p_out 18>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + qca,asid = <2>; + qca,auto-restart; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>; + #else + memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>, + <&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>; + #endif + }; + + /* QCN6122 5G */ + q6v5_wcss_userpd3 { + m3_firmware = "qcn6122/m3_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 24 0>, + <&wcss_smp2p_in 25 0>, + <&wcss_smp2p_in 28 0>, + <&wcss_smp2p_in 27 0>; + interrupt-names ="fatal", + "ready", + "spawn_ack", + "stop-ack"; + qcom,smem-states = <&wcss_smp2p_out 24>, + <&wcss_smp2p_out 25>, + <&wcss_smp2p_out 26>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + qca,asid = <3>; + qca,auto-restart; + #ifdef __IPQ_MEM_PROFILE_256_MB__ + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>; + #else + memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>, + <&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>; + #endif + }; +}; + +&i2c_0 { + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&qgic_msi_0 { + status = "ok"; +}; + +&qgic_msi_1 { + status = "ok"; +}; + +&wifi0 { + /* IPQ5018 */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd1"; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x24>; + qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>; +#ifdef __CNSS2__ + qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>; +#else + qcom,caldb-addr = <0x4D400000>; + m3-dump-addr = <0x4D200000>; +#endif + qcom,caldb-size = <0x200000>; + status = "ok"; +}; + +&wifi1 { + /* QCN6122 6G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd3"; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0x60>; + qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>; +#ifdef __CNSS2__ + qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>; +#else + qcom,caldb-addr = <0x4FF00000>; + m3-dump-addr = <0x4FD00000>; +#endif + qcom,caldb-size = <0x500000>; + status = "ok"; +}; + +&wifi2 { + /* QCN6122 6G */ + qcom,multipd_arch; + qcom,userpd-subsys-name = "q6v5_wcss_userpd3"; +#ifdef __IPQ_MEM_PROFILE_256_MB__ + qcom,tgt-mem-mode = <2>; +#else + qcom,tgt-mem-mode = <1>; +#endif + qcom,board_id = <0xb0>; + qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>; +#ifdef __CNSS2__ + qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>; +#else + qcom,caldb-addr = <0x4FF00000>; + m3-dump-addr = <0x4FD00000>; +#endif + qcom,caldb-size = <0x500000>; + status = "disabled"; +}; diff --git a/feeds/ipq807x/ipq807x/image/ipq50xx.mk b/feeds/ipq807x/ipq807x/image/ipq50xx.mk index c96d5d3e..db3eff67 100644 --- a/feeds/ipq807x/ipq807x/image/ipq50xx.mk +++ b/feeds/ipq807x/ipq807x/image/ipq50xx.mk @@ -46,6 +46,15 @@ define Device/cybertan_eww631_a1 endef TARGET_DEVICES += cybertan_eww631_a1 +define Device/wallys_dr5018 + DEVICE_TITLE := Wallys DR5018 + DEVICE_DTS := qcom-ipq5018-wallys-dr5018 + SUPPORTED_DEVICES := wallys,dr5018 + DEVICE_PACKAGES := ath11k-wifi-wallys-dr5018 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122 + DEVICE_DTS_CONFIG := config@mp03.5-c1 +endef +TARGET_DEVICES += wallys_dr5018 + define Device/cybertan_eww631_b1 DEVICE_TITLE := CyberTan EWW631-B1 DEVICE_DTS := qcom-ipq5018-eww631-b1 diff --git a/feeds/wifi-ax/ath11k-wifi/Makefile b/feeds/wifi-ax/ath11k-wifi/Makefile index 76e95070..532df868 100644 --- a/feeds/wifi-ax/ath11k-wifi/Makefile +++ b/feeds/wifi-ax/ath11k-wifi/Makefile @@ -46,6 +46,7 @@ ALLWIFIBOARDS:= \ indio-um-510axm-v1 \ muxi-ap3220l \ plasmacloud-pax1800 \ + wallys-dr5018 \ wallys-dr6018 \ wallys-dr6018-v4 \ tplink-ex227 \ @@ -356,6 +357,7 @@ $(eval $(call generate-ath11k-wifi-package,cybertan-eww622-a1,CyberTan EWW622 A1 $(eval $(call generate-ath11k-wifi-package,cybertan-eww631-a1,CyberTan EWW631 A1)) $(eval $(call generate-ath11k-wifi-package,cybertan-eww631-b1,CyberTan EWW631 B1)) $(eval $(call generate-ath11k-wifi-package,sercomm-wallaby,Sercomm Kiwi)) +$(eval $(call generate-ath11k-wifi-package,wallys-dr5018,Wallys Dr5018)) $(eval $(call generate-ath11k-wifi-package,wallys-dr6018,Wallys DR6018)) $(eval $(call generate-ath11k-wifi-package,wallys-dr6018-v4,Wallys DR6018 V4)) $(eval $(call generate-ath11k-wifi-package,edgecore-eap101,EdgeCore EAP101)) diff --git a/feeds/wifi-ax/ath11k-wifi/board-wallys-dr5018.bin.IPQ5018 b/feeds/wifi-ax/ath11k-wifi/board-wallys-dr5018.bin.IPQ5018 new file mode 100755 index 00000000..2d45b8c1 Binary files /dev/null and b/feeds/wifi-ax/ath11k-wifi/board-wallys-dr5018.bin.IPQ5018 differ diff --git a/feeds/wifi-ax/ath11k-wifi/board-wallys-dr5018.bin.QCN6122 b/feeds/wifi-ax/ath11k-wifi/board-wallys-dr5018.bin.QCN6122 new file mode 100755 index 00000000..22534464 Binary files /dev/null and b/feeds/wifi-ax/ath11k-wifi/board-wallys-dr5018.bin.QCN6122 differ diff --git a/profiles/wallys_dr5018.yml b/profiles/wallys_dr5018.yml new file mode 100644 index 00000000..59bacfa2 --- /dev/null +++ b/profiles/wallys_dr5018.yml @@ -0,0 +1,14 @@ +--- +profile: wallys_dr5018 +target: ipq807x +subtarget: ipq50xx +description: Build image for the Wallys DR5018 +image: bin/targets/ipq807x/ipq50xx/openwrt-ipq807x-wallys_dr5018-squashfs-sysupgrade.tar +feeds: + - name: ipq807x + path: ../../feeds/ipq807x +packages: + - ipq807x +include: + - wifi-ax + - ucentral-ap