vboot2: misc higher-level routines, part 2

I'm breaking the last chunk of vboot2 into smaller pieces as I add
tests.  This has the higher-level routines for verifying keyblock and
preamble.

BUG=chromium:370082
BRANCH=none
TEST=make clean && VBOOT2=1 COV=1 make

Change-Id: I82da9542c8857a3f89a85f206c9f5aecadf94a79
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/203501
Reviewed-by: Bill Richardson <wfrichar@chromium.org>

Makefile

@@ -575,6 +575,7 @@ TEST_NAMES += \
 	tests/vb2_common2_tests \
 	tests/vb2_common3_tests \
 	tests/vb2_misc_tests \
+	tests/vb2_misc2_tests \
 	tests/vb2_nvstorage_tests \
 	tests/vb2_rsa_padding_tests \
 	tests/vb2_rsa_utility_tests \
@@ -1106,6 +1107,7 @@ run2tests: test_setup
 	${RUNTEST} ${BUILD_RUN}/tests/vb2_common2_tests ${TEST_KEYS}
 	${RUNTEST} ${BUILD_RUN}/tests/vb2_common3_tests ${TEST_KEYS}
 	${RUNTEST} ${BUILD_RUN}/tests/vb2_misc_tests
+	${RUNTEST} ${BUILD_RUN}/tests/vb2_misc2_tests
 	${RUNTEST} ${BUILD_RUN}/tests/vb2_nvstorage_tests
 	${RUNTEST} ${BUILD_RUN}/tests/vb2_rsa_utility_tests
 	${RUNTEST} ${BUILD_RUN}/tests/vb2_secdata_tests

firmware/2lib/2misc.c

@@ -342,3 +342,216 @@ int vb2_select_fw_slot(struct vb2_context *ctx)
 
 	return VB2_SUCCESS;
 }
+
+int vb2_verify_fw_keyblock(struct vb2_context *ctx)
+{
+	struct vb2_shared_data *sd = vb2_get_sd(ctx);
+	struct vb2_workbuf wb;
+
+	uint8_t *key_data;
+	uint32_t key_size;
+	struct vb2_packed_key *packed_key;
+	struct vb2_public_key root_key;
+
+	struct vb2_keyblock *kb;
+	uint32_t block_size;
+
+	uint32_t sec_version;
+	int rv;
+
+	vb2_workbuf_from_ctx(ctx, &wb);
+
+	/* Read the root key */
+	key_size = sd->gbb_rootkey_size;
+	key_data = vb2_workbuf_alloc(&wb, key_size);
+	if (!key_data)
+		return VB2_ERROR_FW_KEYBLOCK_WORKBUF_ROOT_KEY;
+
+	rv = vb2ex_read_resource(ctx, VB2_RES_GBB, sd->gbb_rootkey_offset,
+				 key_data, key_size);
+	if (rv)
+		return rv;
+
+	/* Unpack the root key */
+	rv = vb2_unpack_key(&root_key, key_data, key_size);
+	if (rv)
+		return rv;
+
+	/* Load the firmware keyblock header after the root key */
+	kb = vb2_workbuf_alloc(&wb, sizeof(*kb));
+	if (!kb)
+		return VB2_ERROR_FW_KEYBLOCK_WORKBUF_HEADER;
+
+	rv = vb2ex_read_resource(ctx, VB2_RES_FW_VBLOCK, 0, kb, sizeof(*kb));
+	if (rv)
+		return rv;
+
+	block_size = kb->keyblock_size;
+
+	/*
+	 * Load the entire keyblock, now that we know how big it is.  Note that
+	 * we're loading the entire keyblock instead of just the piece after
+	 * the header.  That means we re-read the header.  But that's a tiny
+	 * amount of data, and it makes the code much more straightforward.
+	 */
+	kb = vb2_workbuf_realloc(&wb, sizeof(*kb), block_size);
+	if (!kb)
+		return VB2_ERROR_FW_KEYBLOCK_WORKBUF;
+
+	rv = vb2ex_read_resource(ctx, VB2_RES_FW_VBLOCK, 0, kb, block_size);
+	if (rv)
+		return rv;
+
+	/* Verify the keyblock */
+	rv = vb2_verify_keyblock(kb, block_size, &root_key, &wb);
+	if (rv)
+		return rv;
+
+	/* Read the secure key version */
+	rv = vb2_secdata_get(ctx, VB2_SECDATA_VERSIONS, &sec_version);
+	if (rv)
+		return rv;
+
+	/* Key version is the upper 16 bits of the composite firmware version */
+	if (kb->data_key.key_version > 0xffff)
+		return VB2_ERROR_FW_KEYBLOCK_VERSION_RANGE;
+	if (kb->data_key.key_version < (sec_version >> 16))
+		return VB2_ERROR_FW_KEYBLOCK_VERSION_ROLLBACK;
+
+	sd->fw_version = kb->data_key.key_version << 16;
+
+	/*
+	 * Save the data key in the work buffer.  This overwrites the root key
+	 * we read above.  That's ok, because now that we have the data key we
+	 * no longer need the root key.
+	 */
+	packed_key = (struct vb2_packed_key *)key_data;
+
+	packed_key->algorithm = kb->data_key.algorithm;
+	packed_key->key_version = kb->data_key.key_version;
+	packed_key->key_size = kb->data_key.key_size;
+
+	/*
+	 * Use memmove() instead of memcpy().  In theory, the destination will
+	 * never overlap because with the source because the root key is likely
+	 * to be at least as large as the data key, but there's no harm here in
+	 * being paranoid.
+	 */
+	memmove(key_data + packed_key->key_offset,
+		(uint8_t*)&kb->data_key + kb->data_key.key_offset,
+		packed_key->key_size);
+
+	/* Save the packed key offset and size */
+	sd->workbuf_data_key_offset = vb2_offset_of(ctx->workbuf, key_data);
+	sd->workbuf_data_key_size =
+		packed_key->key_offset + packed_key->key_size;
+
+	/* Preamble follows the keyblock in the vblock */
+	sd->vblock_preamble_offset = kb->keyblock_size;
+
+	/* Data key will persist in the workbuf after we return */
+	ctx->workbuf_used = sd->workbuf_data_key_offset +
+		sd->workbuf_data_key_size;
+
+	return VB2_SUCCESS;
+}
+
+// TODO: Terrible that this and the low-level verification want to have the
+// same function name.  Pick a better name...
+int vb2_verify_fw_preamble2(struct vb2_context *ctx)
+{
+	struct vb2_shared_data *sd = vb2_get_sd(ctx);
+	struct vb2_workbuf wb;
+
+	uint8_t *key_data = ctx->workbuf + sd->workbuf_data_key_offset;
+	uint32_t key_size = sd->workbuf_data_key_size;
+	struct vb2_public_key data_key;
+
+	/* Preamble goes in the next unused chunk of work buffer */
+	struct vb2_fw_preamble *pre;
+	uint32_t pre_size;
+
+	uint32_t sec_version;
+	int rv;
+
+	vb2_workbuf_from_ctx(ctx, &wb);
+
+	/* Unpack the firmware data key */
+	if (!sd->workbuf_data_key_size)
+		return VB2_ERROR_FW_PREAMBLE2_DATA_KEY;
+
+	rv = vb2_unpack_key(&data_key, key_data, key_size);
+	if (rv)
+		return rv;
+
+	/* Load the firmware preamble header */
+	pre = vb2_workbuf_alloc(&wb, sizeof(*pre));
+	if (!pre)
+		return VB2_ERROR_FW_PREAMBLE2_WORKBUF_HEADER;
+
+	rv = vb2ex_read_resource(ctx, VB2_RES_FW_VBLOCK,
+				 sd->vblock_preamble_offset,
+				 pre, sizeof(*pre));
+	if (rv)
+		return rv;
+
+	pre_size = pre->preamble_size;
+
+	/* Load the entire firmware preamble, now that we know how big it is */
+	pre = vb2_workbuf_realloc(&wb, sizeof(*pre), pre_size);
+	if (!pre)
+		return VB2_ERROR_FW_PREAMBLE2_WORKBUF;
+
+	rv = vb2ex_read_resource(ctx, VB2_RES_FW_VBLOCK,
+				 sd->vblock_preamble_offset,
+				 pre, pre_size);
+	if (rv)
+		return rv;
+
+	/* Work buffer now contains the data subkey data and the preamble */
+
+	/* Verify the preamble */
+	rv = vb2_verify_fw_preamble(pre, pre_size, &data_key, &wb);
+	if (rv)
+		return rv;
+
+	/* Read the secure key version */
+	rv = vb2_secdata_get(ctx, VB2_SECDATA_VERSIONS, &sec_version);
+	if (rv)
+		return rv;
+
+	/*
+	 * Firmware version is the lower 16 bits of the composite firmware
+	 * version.
+	 */
+	if (pre->firmware_version > 0xffff)
+		return VB2_ERROR_FW_PREAMBLE2_VERSION_RANGE;
+
+	/* Combine with the key version from vb2_verify_fw_keyblock() */
+	sd->fw_version |= pre->firmware_version;
+	if (sd->fw_version < sec_version)
+		return VB2_ERROR_FW_PREAMBLE2_VERSION_ROLLBACK;
+
+	/*
+	 * If this is a newer version than in secure storage, and we
+	 * successfully booted the same slot last boot, roll forward the
+	 * version in secure storage.
+	 */
+	if (sd->fw_version > sec_version &&
+	    sd->last_fw_slot == sd->fw_slot &&
+	    sd->last_fw_result == VB2_FW_RESULT_SUCCESS) {
+
+		rv = vb2_secdata_set(ctx, VB2_SECDATA_VERSIONS, sd->fw_version);
+		if (rv)
+			return rv;
+	}
+
+	/* Keep track of where we put the preamble */
+	sd->workbuf_preamble_offset = vb2_offset_of(ctx->workbuf, pre);
+	sd->workbuf_preamble_size = pre_size;
+
+	/* Preamble will persist in work buffer after we return */
+	ctx->workbuf_used = sd->workbuf_preamble_offset + pre_size;
+
+	return VB2_SUCCESS;
+}

firmware/2lib/include/2misc.h

@@ -112,4 +112,24 @@ int vb2_check_tpm_clear(struct vb2_context *ctx);
  */
 int vb2_select_fw_slot(struct vb2_context *ctx);
 
+/**
+ * Verify the firmware keyblock using the root key.
+ *
+ * After this call, the data key is stored in the work buffer.
+ *
+ * @param ctx		Vboot context
+ * @return VB2_SUCCESS, or error code on error.
+ */
+int vb2_verify_fw_keyblock(struct vb2_context *ctx);
+
+/**
+ * Verify the firmware preamble using the data subkey from the keyblock.
+ *
+ * After this call, the preamble is stored in the work buffer.
+ *
+ * @param ctx		Vboot context
+ * @return VB2_SUCCESS, or error code on error.
+ */
+int vb2_verify_fw_preamble2(struct vb2_context *ctx);
+
 #endif  /* VBOOT_REFERENCE_VBOOT_2MISC_H_ */

tests/vb2_misc2_tests.c

@@ -0,0 +1,377 @@
+/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Tests for misc library
+ */
+
+#include <stdio.h>
+
+#include "2sysincludes.h"
+#include "2api.h"
+#include "2common.h"
+#include "2misc.h"
+#include "2nvstorage.h"
+#include "2secdata.h"
+
+#include "test_common.h"
+
+/* Common context for tests */
+static uint8_t workbuf[VB2_WORKBUF_RECOMMENDED_SIZE]
+	__attribute__ ((aligned (16)));
+static struct vb2_context cc;
+static struct vb2_shared_data *sd;
+
+/* Mocked function data */
+
+static struct {
+	struct vb2_gbb_header h;
+	struct vb2_packed_key rootkey;
+	char rootkey_data[32];
+} mock_gbb;
+
+static struct {
+	/* Keyblock */
+	struct {
+		struct vb2_keyblock kb;
+		char data_key_data[16];
+		uint8_t kbdata[128];
+	} k;
+	/* Preamble follows keyblock */
+	struct {
+		struct vb2_fw_preamble pre;
+		uint8_t predata[128];
+	} p;
+
+} mock_vblock;
+
+static int mock_read_res_fail_on_call;
+static int mock_unpack_key_retval;
+static int mock_verify_keyblock_retval;
+static int mock_verify_preamble_retval;
+
+/* Type of test to reset for */
+enum reset_type {
+	FOR_KEYBLOCK,
+	FOR_PREAMBLE
+};
+
+static void reset_common_data(enum reset_type t)
+{
+	struct vb2_keyblock *kb = &mock_vblock.k.kb;
+	struct vb2_fw_preamble *pre = &mock_vblock.p.pre;
+
+	memset(workbuf, 0xaa, sizeof(workbuf));
+
+	memset(&cc, 0, sizeof(cc));
+	cc.workbuf = workbuf;
+	cc.workbuf_size = sizeof(workbuf);
+
+	vb2_init_context(&cc);
+	sd = vb2_get_sd(&cc);
+
+	vb2_nv_init(&cc);
+
+	vb2_secdata_create(&cc);
+	vb2_secdata_init(&cc);
+
+	mock_read_res_fail_on_call = 0;
+	mock_unpack_key_retval = VB2_SUCCESS;
+	mock_verify_keyblock_retval = VB2_SUCCESS;
+	mock_verify_preamble_retval = VB2_SUCCESS;
+
+	/* Set up mock data for verifying keyblock */
+	vb2_secdata_set(&cc, VB2_SECDATA_VERSIONS, 0x20002);
+
+	sd->gbb_rootkey_offset = vb2_offset_of(&mock_gbb, &mock_gbb.rootkey);
+	sd->gbb_rootkey_size = sizeof(mock_gbb.rootkey_data);
+	sd->last_fw_result = VB2_FW_RESULT_SUCCESS;
+
+	mock_gbb.rootkey.algorithm = 11;
+	mock_gbb.rootkey.key_offset =
+		vb2_offset_of(&mock_gbb.rootkey,
+			      &mock_gbb.rootkey_data);
+	mock_gbb.rootkey.key_size = sizeof(mock_gbb.rootkey_data);
+
+	kb->keyblock_size = sizeof(mock_vblock.k);
+	kb->data_key.algorithm = 7;
+	kb->data_key.key_version = 2;
+	kb->data_key.key_offset =
+		vb2_offset_of(&mock_vblock.k, &mock_vblock.k.data_key_data) -
+		vb2_offset_of(&mock_vblock.k, &kb->data_key);
+	kb->data_key.key_size = sizeof(mock_vblock.k.data_key_data);
+	strcpy(mock_vblock.k.data_key_data, "data key data!!");
+
+	pre->preamble_size = sizeof(mock_vblock.p);
+	pre->firmware_version = 2;
+
+	/* If verifying preamble, verify keyblock first to set up data key */
+	if (t == FOR_PREAMBLE)
+		vb2_verify_fw_keyblock(&cc);
+};
+
+/* Mocked functions */
+
+int vb2ex_read_resource(struct vb2_context *ctx,
+			enum vb2_resource_index index,
+			uint32_t offset,
+			void *buf,
+			uint32_t size)
+{
+	uint8_t *rptr;
+	uint32_t rsize;
+
+	if (--mock_read_res_fail_on_call == 0)
+		return VB2_ERROR_EX_READ_RESOURCE_INDEX;
+
+	switch(index) {
+	case VB2_RES_GBB:
+		rptr = (uint8_t *)&mock_gbb;
+		rsize = sizeof(mock_gbb);
+		break;
+	case VB2_RES_FW_VBLOCK:
+		rptr = (uint8_t *)&mock_vblock;
+		rsize = sizeof(mock_vblock);
+		break;
+	default:
+		return VB2_ERROR_EX_READ_RESOURCE_INDEX;
+	}
+
+	if (offset > rsize || offset + size > rsize)
+		return VB2_ERROR_EX_READ_RESOURCE_SIZE;
+
+	memcpy(buf, rptr + offset, size);
+	return VB2_SUCCESS;
+}
+
+int vb2_unpack_key(struct vb2_public_key *key,
+		   const uint8_t *buf,
+		   uint32_t size)
+{
+	return mock_unpack_key_retval;
+}
+
+int vb2_verify_keyblock(struct vb2_keyblock *block,
+			uint32_t size,
+			const struct vb2_public_key *key,
+			struct vb2_workbuf *wb)
+{
+	return mock_verify_keyblock_retval;
+}
+
+int vb2_verify_fw_preamble(struct vb2_fw_preamble *preamble,
+			   uint32_t size,
+			   const struct vb2_public_key *key,
+			   struct vb2_workbuf *wb)
+{
+	return mock_verify_preamble_retval;
+}
+
+/* Tests */
+
+static void verify_keyblock_tests(void)
+{
+	struct vb2_keyblock *kb = &mock_vblock.k.kb;
+	struct vb2_packed_key *k;
+	int wb_used_before;
+
+	/* Test successful call */
+	reset_common_data(FOR_KEYBLOCK);
+	wb_used_before = cc.workbuf_used;
+	TEST_SUCC(vb2_verify_fw_keyblock(&cc), "keyblock verify");
+	TEST_EQ(sd->fw_version, 0x20000, "keyblock version");
+	TEST_EQ(sd->vblock_preamble_offset, sizeof(mock_vblock.k),
+		"preamble offset");
+	TEST_EQ(sd->workbuf_data_key_offset,
+		(wb_used_before + (VB2_WORKBUF_ALIGN - 1)) &
+		~(VB2_WORKBUF_ALIGN - 1),
+		"keyblock data key offset");
+	TEST_EQ(cc.workbuf_used,
+		sd->workbuf_data_key_offset + sd->workbuf_data_key_size,
+		"workbuf used");
+
+	/* Make sure data key was properly saved */
+	k = (struct vb2_packed_key *)(cc.workbuf + sd->workbuf_data_key_offset);
+	TEST_EQ(k->algorithm, 7, "data key algorithm");
+	TEST_EQ(k->key_version, 2, "data key version");
+	TEST_EQ(k->key_size, sizeof(mock_vblock.k.data_key_data),
+		"data key size");
+	TEST_EQ(memcmp(cc.workbuf + sd->workbuf_data_key_offset +
+		       k->key_offset, mock_vblock.k.data_key_data,
+		       sizeof(mock_vblock.k.data_key_data)),
+		0, "data key data");
+	TEST_EQ(cc.workbuf_used,
+		sd->workbuf_data_key_offset + sd->workbuf_data_key_size,
+		"workbuf used after");
+
+	/* Test failures */
+	reset_common_data(FOR_KEYBLOCK);
+	cc.workbuf_used = cc.workbuf_size - sd->gbb_rootkey_size + 8;
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_FW_KEYBLOCK_WORKBUF_ROOT_KEY,
+		"keyblock not enough workbuf for root key");
+
+	reset_common_data(FOR_KEYBLOCK);
+	sd->gbb_rootkey_size = sizeof(mock_gbb);
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_EX_READ_RESOURCE_SIZE,
+		"keyblock read root key");
+
+	reset_common_data(FOR_KEYBLOCK);
+	mock_unpack_key_retval = VB2_ERROR_UNPACK_KEY_ALGORITHM;
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_UNPACK_KEY_ALGORITHM,
+		"keyblock unpack root key");
+
+	reset_common_data(FOR_KEYBLOCK);
+	cc.workbuf_used = cc.workbuf_size - sd->gbb_rootkey_size - 8;
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_FW_KEYBLOCK_WORKBUF_HEADER,
+		"keyblock not enough workbuf for header");
+
+	reset_common_data(FOR_KEYBLOCK);
+	mock_read_res_fail_on_call = 2;
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_EX_READ_RESOURCE_INDEX,
+		"keyblock read keyblock header");
+
+	reset_common_data(FOR_KEYBLOCK);
+	cc.workbuf_used = cc.workbuf_size - sd->gbb_rootkey_size
+		- sizeof(struct vb2_keyblock);
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_FW_KEYBLOCK_WORKBUF,
+		"keyblock not enough workbuf for entire keyblock");
+
+	reset_common_data(FOR_KEYBLOCK);
+	kb->keyblock_size = sizeof(mock_vblock) + 1;
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_EX_READ_RESOURCE_SIZE,
+		"keyblock read keyblock");
+
+	reset_common_data(FOR_KEYBLOCK);
+	mock_verify_keyblock_retval = VB2_ERROR_KEYBLOCK_MAGIC;
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_KEYBLOCK_MAGIC,
+		"keyblock verify keyblock");
+
+	reset_common_data(FOR_KEYBLOCK);
+	kb->data_key.key_version = 0x10000;
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_FW_KEYBLOCK_VERSION_RANGE,
+		"keyblock version range");
+
+	reset_common_data(FOR_KEYBLOCK);
+	kb->data_key.key_version = 1;
+	TEST_EQ(vb2_verify_fw_keyblock(&cc),
+		VB2_ERROR_FW_KEYBLOCK_VERSION_ROLLBACK,
+		"keyblock rollback");
+}
+
+static void verify_preamble_tests(void)
+{
+	struct vb2_fw_preamble *pre = &mock_vblock.p.pre;
+	int wb_used_before;
+	uint32_t v;
+
+	/* Test successful call */
+	reset_common_data(FOR_PREAMBLE);
+	wb_used_before = cc.workbuf_used;
+	TEST_SUCC(vb2_verify_fw_preamble2(&cc), "preamble good");
+	TEST_EQ(sd->fw_version, 0x20002, "combined version");
+	TEST_EQ(sd->workbuf_preamble_offset,
+		(wb_used_before + (VB2_WORKBUF_ALIGN - 1)) &
+		~(VB2_WORKBUF_ALIGN - 1),
+		"preamble offset");
+	TEST_EQ(sd->workbuf_preamble_size, pre->preamble_size, "preamble size");
+	TEST_EQ(cc.workbuf_used,
+		sd->workbuf_preamble_offset + sd->workbuf_preamble_size,
+		"workbuf used");
+
+	/* Expected failures */
+	reset_common_data(FOR_PREAMBLE);
+	sd->workbuf_data_key_size = 0;
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_FW_PREAMBLE2_DATA_KEY,
+		"preamble no data key");
+
+	reset_common_data(FOR_PREAMBLE);
+	mock_unpack_key_retval = VB2_ERROR_UNPACK_KEY_ALGORITHM;
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_UNPACK_KEY_ALGORITHM,
+		"preamble unpack data key");
+
+	reset_common_data(FOR_PREAMBLE);
+	cc.workbuf_used = cc.workbuf_size - sizeof(struct vb2_fw_preamble) + 8;
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_FW_PREAMBLE2_WORKBUF_HEADER,
+		"preamble not enough workbuf for header");
+
+	reset_common_data(FOR_PREAMBLE);
+	sd->vblock_preamble_offset = sizeof(mock_vblock);
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_EX_READ_RESOURCE_SIZE,
+		"preamble read header");
+
+	reset_common_data(FOR_PREAMBLE);
+	cc.workbuf_used = cc.workbuf_size - sizeof(mock_vblock.p) + 8;
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_FW_PREAMBLE2_WORKBUF,
+		"preamble not enough workbuf");
+
+	reset_common_data(FOR_PREAMBLE);
+	pre->preamble_size = sizeof(mock_vblock);
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_EX_READ_RESOURCE_SIZE,
+		"preamble read full");
+
+	reset_common_data(FOR_PREAMBLE);
+	mock_verify_preamble_retval = VB2_ERROR_PREAMBLE_SIG_INVALID;
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_PREAMBLE_SIG_INVALID,
+		"preamble verify");
+
+	reset_common_data(FOR_PREAMBLE);
+	pre->firmware_version = 0x10000;
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_FW_PREAMBLE2_VERSION_RANGE,
+		"preamble version range");
+
+	reset_common_data(FOR_PREAMBLE);
+	pre->firmware_version = 1;
+	TEST_EQ(vb2_verify_fw_preamble2(&cc),
+		VB2_ERROR_FW_PREAMBLE2_VERSION_ROLLBACK,
+		"preamble version rollback");
+
+	reset_common_data(FOR_PREAMBLE);
+	pre->firmware_version = 3;
+	TEST_SUCC(vb2_verify_fw_preamble2(&cc),
+		  "preamble version roll forward");
+	vb2_secdata_get(&cc, VB2_SECDATA_VERSIONS, &v);
+	TEST_EQ(v, 0x20003, "roll forward");
+
+	/* Newer version without result success doesn't roll forward */
+	reset_common_data(FOR_PREAMBLE);
+	pre->firmware_version = 3;
+	sd->last_fw_result = VB2_FW_RESULT_UNKNOWN;
+	TEST_SUCC(vb2_verify_fw_preamble2(&cc),
+		  "preamble version no roll forward 1");
+	vb2_secdata_get(&cc, VB2_SECDATA_VERSIONS, &v);
+	TEST_EQ(v, 0x20002, "no roll forward");
+
+	/* Newer version with success but for other slot doesn't roll forward */
+	reset_common_data(FOR_PREAMBLE);
+	pre->firmware_version = 3;
+	sd->last_fw_slot = 1;
+	TEST_SUCC(vb2_verify_fw_preamble2(&cc),
+		  "preamble version no roll forward 2");
+	vb2_secdata_get(&cc, VB2_SECDATA_VERSIONS, &v);
+	TEST_EQ(v, 0x20002, "no roll forward");
+}
+
+int main(int argc, char* argv[])
+{
+	verify_keyblock_tests();
+	verify_preamble_tests();
+
+	return gTestSuccess ? 0 : 255;
+}