Also add new 'invalid' host event bit; if the host reads this, it
knows the memory-mapped data for current events is invalid.
BUG=chrome-os-partner:11146
TEST=manual
On host, ectool eventget -> should print events = 0
On EC, hostevent set 0x80000000
On host, ectool eventget -> should print events = invalid
Reboot EC; should see debug output where event mask 0x2000 is set
during the boot process.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I8d3f161eec25db50ac06e3642a1a1fb8edb9590e
Reviewed-on: https://gerrit.chromium.org/gerrit/26876
And fix returning memory-mapped string length on LPC as well.
BUG=chrome-os-partner:11090
TEST=manual
from EC, 'hostevent set 0x40000'
from host, 'ectool eventget' --> should print 0x40000
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I9edbd0a1468b5d4160ce67c471332226e51fa868
Reviewed-on: https://gerrit.chromium.org/gerrit/26719
Reviewed-by: Simon Glass <sjg@chromium.org>
Rather than go through the task queue, host_command_process() processes
the command immediately, has all of its required state passed in,
allowing the caller complete control of the buffers.
BUG=chrome-os-partner:10533
TEST=manual:
build and boot on link, see that messages are stil processed
build and boot on snow, which uses this new command
See that the SPI keyboard works now
Change-Id: Ib7587de10c42caf01bc95bb4d515fd0afc3da7d8
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/25983
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This seems to be a hangover from the LPC protocol. We can send a result
just by sending a response with no data.
Drop this function and remove all uses of it.
Also use 'enum ec_status' instead of int, since this is the correct
response type.
BUG=chrome-os-partner:10533
TEST=manual:
build for all boards
build and boot on daisy
Change-Id: I93a029bd6ba8cec567b61af3b410bcead015b5c0
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/25980
This also updates the communication protocol between the EC and the AP in a
non backward compatible way.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=on Daisy with updated kernel driver, use the keyboard in ChromeOS
Change-Id: I5a50e9a74b9891153a37ea79318c8a66a1b0c5ca
Preparatory work to use common host command code between ARM and x86.
Just rename constants, do not change the binary API.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=make BOARD=link
Change-Id: I534d427c9b50103273835a6f32a0ddb622c762b3
Preparatory work to use common host command code between ARM and x86.
Every command sends back explicitly the size of the response payload.
The size of the response defaults to 0 ond can be updated.
Add a protocol version number returned as command 0x00 to help with
backward compatibility.
move a couple of function from lpc specific header to host commands to
be able to implement them for the I2C link.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=make BOARD=link
Change-Id: I6a28edf02996ddf6b7f32a3831d07d5f0271848f
This adds a 'ch' command which prints/sets which channels are active
This handles all the async output; the remaining debug commands will
be refactored to use ccprintf() / ccputs() in a followup CL.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7464
TEST=manual
ch --> all channels active
ch 0x100 -> just port80 active
powerbtn -> system boots; only port 80 codes shown on console
Change-Id: I9efc43acec919b62b78c2c82c61946d32380adfe
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7461
TEST=manual
make BOARD={bds,link,daisy}
make tests
flash link system and make sure it boots
Change-Id: I1241a1895c083e387e38ddab01ac346ca4474eb9
Useful when debugging to determine if a user has an official build or
not, particularly early in the devel process where we're handing
builds to everyone. Particularly useful for proto1, since not all
those systems will be case-open servo-attached.
Also move get-version LPC command into system.c, where it's closer to
the system functions it calls (matches what we do for other host
commands).
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=none
Change-Id: Idb0f6edf31ca00e32f083be0b0d3f23ab79c5fba
This is necessary to support SCI/SMI events.
Note that this breaks compatibility with previous ectool builds - and
probably also breaks flashrom support.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8253
TEST='ectool hello' and 'ectool flashinfo' still work
and 'ectool usbchargemode 3 1' fails with error 2
Change-Id: If39e5b6e7cdcec1b5ec765594e8492925b430b10
We now read temp sensor readings using the EC mapped space.
So we don't need this command.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8239
TEST="ectool temps 0" works.
Change-Id: I47f425e45cea992b19734f39ac6d9f6db6433d39
Add a LPC command to control USB charging mode. Also add the command to
ectool.
BUG=chrome-os-partner:7476
TEST=Manually test on link proto-0.
Change-Id: Ica87d0a690bc86e28844bd695f31641398b21939
Signed-off-by: Vic Yang <victoryang@chromium.org>
Instead of using a runtime callback to register the console commands,
put them in a special linker section. So we can do a macro to "register"
them during the build.
It saves 684 bytes and a few microseconds at startup.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=run a few commands from the BDS command line.
Change-Id: Id33ea210b9035bf76ed720373c74c5dd24ccd1b1
Add LPC host command to get and set fan speed.
BUG=chrome-os-partner:7313
TEST=Connect a fan and manually test fan actual speed matches target
speed.
Change-Id: I4b6a711a1b8cca0dbd1c1936fe4f0f15240d3453
Add a LPC host command to read temperature sensor value with given
sensor id.
Add ectool command to read temperature sensor value through LPC.
BUG=chrome-os-partner:7329
TEST=Manual check the reading received is the same as value printed by
console command.
Change-Id: Id3386774435be6c3ae010a143f4fa894568efdb8
The LPC is not stable enough to test. Kodus Rong. He creates this idea
to checksum the partial content of flash for read/write/erase. This can
improve the robustness of flashrom.
BUG=none
TEST=Tested with flashrom.
Change-Id: I2a2f7b698a94674c03cbd8e3f15caf34f8986399
This CL add host command to enable, get/set flash write protect range.
BUG=None
TEST=Use flashrom utility to set write protect range, enable write
protect and get status.
Change-Id: I345f1eb65944d8cf8028e6fdb7e43c40cc742a6d
Signed-off-by: Rong Chang <rongchang@chromium.org>
