flags are actually _not_ BATT_FLAG_*, but EC_BATT_FLAG_*. Clarify
that in the comment, and add a new EC_BATT_FLAG_INVALID flag to
indicate that some of the data may be invalid (dual-battery master
needs to know that to make appropriate charging/discharging
decision).
BRANCH=none
BUG=b:65697962
BUG=b:65697620
TEST=Flash hammer and wand, flags make sense.
Change-Id: I3c428c850020a29b3f452504b60b52946a04c503
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/859400
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
If a bios carries an EC image signed by a wrong key, EFS EC falls back
to the previous slot upon reboot. Vboot currently does not handle this
case and tries to update the EC with an incompatible image again.
When this happens, a user sees 'applying critical update' screen
repeatedly.
This patch adds EFS_VERIFYV host command. Vboot on AP calls it to check
whether the EC likes a newly updated image or not. If the verification
fails, it's considered as update failure and vboot displays 'broken'
screen.
BUG=b:71719323
BRANCH=none
TEST=Flash EC SPI with an image which has a different RO key. Boot DUT
and let it run software sync. EC-RO rejects the updated image and falls
back to the previous one. The update counter is incremented and vboot
shows the 'broken' screen, requesting recovery.
Change-Id: I8a107a376963baa146ff691c50d80018ec3e429c
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/858159
Reviewed-by: Randall Spangler <rspangler@chromium.org>
SYNC motion sensor are use to count event.
It sends an event to the AP each time a GPIO goes low/high, the datum
contains a 16 bit counter.
The location indicates the source of the event, as Android sensor hal
will use this information (via sysfs location attribute) to link the
sensor with other subsystem.
BUG=b:67743747
BRANCH=none
TEST=Unit tests.
Change-Id: Ia808b25730ad4100efa216c6a86b7b090197c5a3
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/848496
Reviewed-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
current is actually a reserved keyword in the Linux kernel,
replace it by actual_current. And voltage by actual_voltage for
consistency.
BRANCH=none
BUG=b:65697962
BUG=b:65697620
TEST=make buildall -j
Change-Id: I8b8115174d15a1cc4b1189a54104bfec559ed72c
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/848460
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
This adds 3 commands to obtain static and dynamic battery
information, as well as control base charger state.
These host commands are meant to be used as part of the EC-EC
communication protocol (based on hostcmd v4 protocol), but could
be used in the future to pass information between AP and EC,
especially when more than 1 battery is present, which would be
hard to support with the current MEMMAP-based approach.
BRANCH=none
BUG=b:65697962
BUG=b:65697620
TEST=Build wand and lux boards, flash it, EC-EC communication works.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Change-Id: I263454794394838918832c9e4623835ab2f3a3da
Reviewed-on: https://chromium-review.googlesource.com/670380
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The size of empty structs (and unions) varies between C and C++. When
including in C++ code our external API in ec_commands.h header with
extern "C". clang will complain (correctly) for all empty structs:
error: empty struct has size 0 in C, size 1 in C++
[-Werror,-Wextern-c-compat]
Remove them from the ec_commands.h header file.
ectool.c has some ugly macros which assume subcommands have both
requests and responses. Change those macros so they only reference
the non-empty sub-structs. The macros are still ugly, but generate
identical output, and don't rely upon zero-length structs.
BUG=chromium:792408
BRANCH=none
TEST=manual
1) Compile the following using 'clang -Wall -Werror':
#include <stdint.h>
extern "C" {
#include "include/ec_commands.h"
}
int main(void) { return 0; }
It compiles without error.
2) Copy the lb_command_paramcount, ms_command_sizes, and
cs_paramcount globals from ectool.c to a dummy .c file and
compile with 'gcc -S' to generate assembly. Do the same
after applying this patch.
Confirm the arrays have the same contents.
Change-Id: Iad76f10315b97205b42118ce070463071fe97128
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/820649
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Unified Host Event Programming Interface (UHEPI) enables a unified host
command EC_CMD_PROGRAM_HOST_EVENT to set/get/clear different host events.
Old host event commands (0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E,
0x8F) is supported for backward compatibility. But newer version of
BIOS/OS is expected to use UHEPI command (EC_CMD_PROGRAM_HOST_EVENT)
The UHEPI also enables the active and lazy wake masks. Active wake mask
is the mask that is programmed in the LPC driver (i.e. the mask that is
actively used by LPC driver for waking the host during suspended state).
It is same as the current wake mask that is set by the smihandler on host
just before entering sleep state S3/S5. On the other hand, lazy wake masks
are per-sleep masks (S0ix, S3, S5) so that they can be used by EC to set
the active wake mask depending upon the type of sleep that the host has
entered. This allows the host BIOS to perform one-time programming of
the wake masks for each supported sleep type and then EC can take care
of appropriately setting the active mask when host enters a particular
sleep state.
BRANCH=none
BUG=b:63969337
TEST=make buildall -j. And verfieid following scenario
1). Verified wake masks with ec hostevent command on S0,S3,S5 and S0ix
2). suspend_stress_test with S3 and S0ix
3). Verified "mosys eventlog list" in S3 and s0ix resume to confirm
wake sources (Lid, power buttton and Mode change)
4). Verified "mosys eventlog list" in S5 resume to confirm wake sources
(Power Button)
5). Verified above scenarios with combination of Old BIOS + New EC and
New BIOS + Old EC(making get_feature_flags1() return 0)
Change-Id: Idb82ee87fffb475cd3fa9771bf7a5efda67af616
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/576047
Commit-Ready: Jenny Tc <jenny.tc@intel.com>
Commit-Ready: Jenny Tc <jenny.tc@intel.corp-partner.google.com>
Tested-by: Jenny Tc <jenny.tc@intel.com>
Tested-by: Jenny Tc <jenny.tc@intel.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
After firmware update, cr50 toggles the EC's reset line, expecting
the system will boot. This isn't the case for Chromebox because it
sets AP_OFF flag on a clean shutdown (to restore the previous power
state after power loss & restore).
This patch adds EC_REBOOT_HIBERNATE_CLEAR_AP_OFF to EC reboot
command. It makes EC first clear AP_OFF then hibernate.
BUG=b:69721737
BRANCH=none
TEST=Verify Fizz reboot after cr50 update.
Change-Id: If3207d7284f244ca1adf0d516ef744dbc739a9c1
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/802632
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Usually, the max current and supply voltage of dedicated chargers
are not known to the EC.
This patch adds EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT, which
allows the host to change the max current and supply voltage of the
dedicated charge port.
BUG=b:64442692
BRANCH=none
TEST=make runtests && buildall. Boot Fizz and let coreboot set
the adapter current and voltage.
Change-Id: I29b3f5762f8b316ca363c23e230530cdf4ca207a
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/769152
This only adds the structs for V4 packets. Host command support for
them is coming in a subsequent CL. V3 packets will continue to be
supported for a while, until all sides support V4.
BUG=chromium:787159
BRANCH=none
TEST=make -j runtests
Change-Id: I7e188a063d8ed60c85f3b8359959c424e3ccd1d9
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/780452
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
With the upcoming change to add a new command to get/set/clear host
events and masks, it seems to be the right time to bump up the host
events and masks to 64-bit. We are already out of available host
events. This change opens up at least 32 bits for new host events.
Old EC commands to operate on host events/masks will still deal with
lower 32-bits of the events/mask. On the other hand, the new command
being added will take care of the entire 64-bit events/masks. This
ensures that old BIOS and kernel versions can still work with the
newer EC versions.
BUG=b:69329196
BRANCH=None
TEST=make -j buildall. Verified:
1. hostevent set 0x4000 ==> Sets correct bit in host events
2. hostevent clear 0x4000 ==> Clears correct bit in host events
3. Kernel is able to query and read correct host event bits from
EC. Verified using evtest.
4. Coreboot is able to read correct wake reason from EC. Verified
using mosys eventlog list.
Change-Id: Idcb24ea364ac6c491efc2f8dd9e29a9df6149e07
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/770925
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add a new DRP policy to "freeze" the power role of each port, never
toggling automatically, though manual role swaps may still occur.
BUG=chromium:769895
BRANCH=servo
TEST=On servo_v4, verify DUT port stays in SRC role and POWER port
stays in SNK role while disconnected.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ibff3cd1ffaf0e884b030c231003763a57acbe02e
Reviewed-on: https://chromium-review.googlesource.com/715276
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add a new mask type (ALWAYS_REPORT mask) that is set by default to
certain host events that should always be reported to the host
irrespective of the state of SCI, SMI and wake masks. This mask
includes host events like critical events resulting in shutdown or
reboot, events that are consumed by BIOS, etc.
Now that ALWAYS_REPORT mask is added, this change also updates the way
EC manages set/query operations for host events:
1. During set operation, EC will check if the host event is present in
any of the 4 masks - SCI, SMI, wake and always report. If yes, then it
is set in hostevents.
2. During query operation, EC will extract the lowest set event from
hostevents, clear it and return it back to the host.
In order to reflect the above change in EC behavior, a new feature bit
is used EC_FEATURE_UNIFIED_WAKE_MASKS. This allows the host to decide
when wake mask needs to be set before checking for host events.
BUG=None
BRANCH=None
TEST=make -j buildall. Also verified following:
1. Wake from S3 works as expected. Host is able to log correct wake
sources (Verified power button, lid open, base key press and tablet
mode change on soraka).
2. Wake from S5 works as expected. Host is able to log correct wake
sources (Verified power button, lid open on soraka).
3. Wake from S0ix works as expected (Verified power button, lid open
on soraka).
4. Software method to trigger recovery still works fine:
reboot ap-off
hostevent set 0x4000
powerb
Change-Id: I62e5c1f82247c82348cd019e082883d86ec2688f
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/719578
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In EFS, EC needs to sysjump to the active copy, which is hashed
and validated by the AP.
BUG=b:67748602
BRANCH=none
TEST=Verify Depthcharge makes EC jump to RW.
Change-Id: I2ca893f7691ad776a791f2044dd7a0983d06e3c5
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/717676
Chromebox ECs performs EFS: verifying firmware before the AP boots.
This patch updates host commands which are required for the EFS.
When EC_REBOOT_FLAG_SWITCH_RW_SLOT is specified, EC_CMD_REBOOT_EC
changes the active slot before it reboots the system.
BUG=b:65264494
BRANCH=none
TEST=On Fizz, verify:
1. RW_B is old and updated by soft sync. RW_B is activated and
executed after reboot. System continues to boot to OS.
2. RW_A is old and updated by soft sync. RW_A is activated and
executed after reboot. System continues to boot to OS.
Change-Id: I08050c985ce0b27b30cb842e6b5b4660f32e5211
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/648450
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This patch adds USB_CHG_TYPE_DEDICATED to enum usb_chg_type. It's
for dedicated AC adapters like a barrel jack adapter used for Fizz.
BUG=b:65591971
BRANCH=none
TEST=make buildall
Change-Id: Ib883c97eb5e468753c73453d7dedd228547ae025
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/665327
Reviewed-by: Shawn N <shawnn@chromium.org>
Chromebox ECs performs EFS: verifying firmware before the AP boots.
This patch updates host commands which are required for the EFS.
The change includes:
* Update EC_CMD_FLASH_REGION_INFO to accept EC_FLASH_REGION_UPDATE
* Update EC_CMD_VBOOT_HASH to accept EC_VBOOT_HASH_OFFSET_UPDATE
When EC_FLASHS_REGION_UPDATE is specified, EC_CMD_FLASH_REGION_INFO
returns the slot which currently is not hosting a running RW copy.
When EC_VBOOT_HASH_OFFSET_UPDATE is specified, EC_CMD_VBOOT_HASH
computs the hash of the update slot. This hash covers the entire
region, including the signature at the end.
This patch undefines CONFIG_CMD_USBMUX and CONFIG_CMD_TYPEC
for gru to create space.
BUG=b:65028930
BRANCH=none
CQ-DEPEND=CL:648071
TEST=On Fizz, verify:
1. RW_B is old and updated by soft sync. RW_B is activated and
executed after reboot. System continues to boot to OS.
2. RW_A is old and updated by soft sync. RW_A is activated and
executed after reboot. System continues to boot to OS.
Change-Id: I9ece907b764d07ce94054ba27996e048c665a80a
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/648448
Servo / Suzy-Q related debugging methods is a big challenge
in factory especially after servo debug header is removed.
Expose some information to OS from EC will do a great help
for massive production.
+ expose charge/battery related state to ectool
1. chg_ctl_mode
2. manual_mode
3. battery_seems_to_be_dead
4. battery_seems_to_be_disconnected
5. battery_was_removed
6. disch_on_ac (learn mode state)
BUG=b:65265543
BRANCH=master
TEST=`ectool chargestate param 0x20000~0x20006 get correct state`
Change-Id: Ic2ed38e2eb9def01be29729fa1fe1959eb73fe43
Signed-off-by: Ryan Zhang <ryan.zhang@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/646412
Reviewed-by: Shawn N <shawnn@chromium.org>
add a subcommand to the PD_CONTROL message to power up a specific
TCPC. in practice, this typically just takes the TCPC out of sleep
mode for cases where sleep mode is controlled by the EC.
under the covers, board_set_tcpc_power_mode() gets a weak function
definition so we don't need to special case this everywhere.
TEST="make buildall" passes; "make tests" passes for reef.
BRANCH=none
BUG=b:35586895
Change-Id: Ib50e265d11eca10c3714049d8cfdf2657eff48c1
Signed-off-by: Caveh Jalali <caveh@google.com>
Reviewed-on: https://chromium-review.googlesource.com/596796
Reviewed-by: Shawn N <shawnn@chromium.org>
We can re-use our pd_log FIFO for other purposes, such as TPM logging.
Carve out event_log, a generic logging module which pd_log is compatible
with.
BUG=b:63760920
TEST=On kevin, verify PD logging is still functional and entries are
seen in dmesg.
BRANCH=None
Change-Id: I8e6ad6f93e9eebc676aca64652c60f81da471a94
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/597314
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Allow host to request a higher-power S3 variant, "wakeable S3", in which
more wakeup sources will be enabled by the EC. The actual implementation
and list of wake sources is left up to the chipset power driver and/or
board code.
BUG=b:63037490
BRANCH=gru
TEST=With subsequent commit, compile on scarlet w/ power sequencing
version = 2.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I469f0cd969052f173cb176196bb6d05f6f76fdb5
Reviewed-on: https://chromium-review.googlesource.com/572210
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Philip Chen <philipchen@chromium.org>
Some chips require special operations before flash can be accessed
(read, write, erase), without it the flash operations could be
corrupted. The chip that requires this should enable the
CONFIG_FLASH_SELECT_REQUIRED config, which exposes
EC_FLASH_INFO_SELECT_REQUIRED in flashinfo flags. Before any flash
operations is executed on the chip, EC_CMD_FLASH_SELECT should be issued
to notify the chip to prepare for the flash operations.
BRANCH=none
BUG=b:63685022
TEST=with depended CLs, touchpad interrupt should be disabled when
flashrom is in progress.
CQ-DEPEND=CL:*416548
Change-Id: I96455adbe739d5f924edf382a2752404a7c5ad04
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/582374
Commit-Ready: Wei-Ning Huang <wnhuang@chromium.org>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Wei-Ning Huang <wnhuang@chromium.org>
Pass in recovery button press/release information to AP using MKBP
button driver.
BUG=b:63893483
BRANCH=None
TEST=Behavior verified by Shelley.
Change-Id: I7a6e50ec8595d99327b5fc8e822bf762e0ce13e0
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/580539
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to report specific wake events from differernt devices
add a host command that allows setting device event mask, and
triggering a host event when that device event is set.
This is done as a separate command and mask because we are running
out of host events, and it takes over the unused thermal overload
event that was never used in EC or BIOS.
The first use case for this is platforms that have AP wake events
that go to the EC, for instance devices that use Deep S3 and have
a limited set of wake pins. (such as Eve)
This allows the AP to determine the exact wake source for an event
so it can be logged and acted on by the AP if necessary.
BUG=b:36024430
BRANCH=eve
TEST=manual testing on eve with trackpad and dsp wake events
Change-Id: I48d94014c00dc1dad098ab96af0ddc7860229762
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://chromium-review.googlesource.com/555632
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Recent changes broke the portability of this header file.
Fix the ACPI guards so it can be used in coreboot.
BUG=b:36024430
BRANCH=none
TEST=make -j buildall (as usual many haven boards fail)
Change-Id: I0d737e7aad7ead90289b43db09352092ef7e3e98
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://chromium-review.googlesource.com/539135
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Add touchpad related host commands:
1) EC_CMD_TP_SELF_TEST: run open short test.
2) EC_CMD_TP_FRAME_INFO: get number of frame and frame size.
3) EC_CMD_TP_FRAME_SNAPSHOT: make a snapshot of the frame.
4) EC_CMD_TP_FRAME_GET: get frame data.
BRANCH=none
BUG=b:62077098
TEST=`make BOARD=rose -j`
`ectool --name=cros_tp tpselftest` and
`ectool --name=cros_tp tpframeget` works
Change-Id: I43db82278e556b1e6f6301fe88233fe7c4a18a14
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/515282
Commit-Ready: Wei-Ning Huang <wnhuang@chromium.org>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Some device has large pages that take up to 2s to erase.
Add support to send a deferred erase command, that willi
be processed on HOOK task.
It can leave the other tasks (HOST_CMD) responsive.
If the whole EC can stall on flash erase, like the STM32F4 do,
at least the command FLASH_ERASE_GET_RESULT can be retried when it times
out.
BRANCH=none
TEST=Check with flashrom doing a loop of overwrites.
BUG=b:38018926
Change-Id: I8ce8e901172843d00aac0d8d59a84cbd13f58a10
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/510012
Reviewed-by: Alexandru M Stan <amstan@chromium.org>
Previously, result codes were being stored as `enum ec_status` values.
The compiler was forcing this value to only be one byte large, since
that's all that was necessary to represent all the values of that
enum.
This change fixes this bug by switching result code variable types from
`enum ec_status` to `uint16_t`.
BRANCH=none
BUG=none
TEST=make buildall -j
Change-Id: Iacdca51dc6c1de677d2fbb59ad6dd2572d21ea7f
Reviewed-on: https://chromium-review.googlesource.com/513609
Commit-Ready: Jeff Andersen <jeffandersen@google.com>
Tested-by: Jeff Andersen <jeffandersen@google.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Move the existing fingerprint host command in the driver and
add more of them to prepare the new fingerprint architecture.
The commands are mostly stubbed for now.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
CQ-DEPEND=*364728
BRANCH=none
BUG=b:35648259
TEST=make BOARD=eve_fp (with and without a private repository)
do a fingerprint image capture with 'fptest'.
Change-Id: Ie17a5fde2d6470c6272e8059bddc845cea07aff2
Reviewed-on: https://chromium-review.googlesource.com/491071
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Adds min_frequency and max_frequency to struct motion_sensor_t.
New attributes min_frequency and max_frequency are now returned in
ectool's MOTIONSENSE_CMD_INFO response.
Incremented ectool's MOTIONSENSE_CMD_INFO version to version 3.
Add constants for MIN_FREQUENCY and MAX_FREQUENCY to each sensor's
header file.
BRANCH=none
BUG=chromium:615059
TEST=build/boot and verify MOTIONSENSE_CMD_INFO response on kevin,
make buildall -j passes.
Change-Id: I66db9715c122ef6bb4665ad5d086a9ecc9c7c93a
Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/482703
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Add new host command EC_CMD_RWSIG_ACTION for controlling rwsig task.
This allow us to make firmware stay at RO without toggling reset pin.
flashrom can use this host command and removed the need to use any
out-of-band pin to toggle the reset pin (and make RWSIG stay in RO).
BRANCH=none
BUG=b:37584134
TEST=on eve, `ectool --name=cros_tp rwsigaction abort` should prevent EC
from jumpping to RW after RWSIG check.
Change-Id: Ia435e4e3ea8ed612a1250d3bf755ca50e5db9d37
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/497787
Commit-Ready: Wei-Ning Huang <wnhuang@chromium.org>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
1. Provide led_control API that can be used by different drivers to
control the state of LED (0=off, 1=on, 2=reset)
2. Add a new LED ID for recovery HW_REINIT indication.
BUG=b:37682514
BRANCH=None
TEST=make -j buildall
Change-Id: I27334bde2b879046746456a610208f3fc2dd68b4
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/487840
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a new host command EC_CMD_RWSIG_CHECK_STATUS for getting rwsig
status and rw firmware hash. This command is used to check the RW
signature of newly updated RW image.
A new subcommand is also added to ectool.
BRANCH=none
BUG=b:37584134
TEST=on rose board `ectool rwsigstatus` works
Change-Id: I33d8709f5248d3a4b8bedb36ded84a93dc8c971f
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/485079
Commit-Ready: Wei-Ning Huang <wnhuang@chromium.org>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
The ec_commands.h header uses types defined in stdint.h. To make the
ec_commands.h header more portable, ensure that includes what it uses.
Running "make -j buildall" worked for all boards except "gru" and "hammer",
which were broken before this change.
BRANCH=none
BUG=none
TEST=make -j buildall
Change-Id: I1ffe41a69b7296736616b9250c45f2749a66f22c
Reviewed-on: https://chromium-review.googlesource.com/483283
Commit-Ready: Carl Hamilton <carlh@chromium.org>
Tested-by: Carl Hamilton <carlh@chromium.org>
Reviewed-by: Jeff Andersen <jeffandersen@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Follow-up to CL:456520, addressing a few more comments.
BRANCH=none
BUG=b:35775099
TEST=sysrq available in EC console
TEST=sysrq h => help message in AP console
TEST=sysrq b => AP reboots
Change-Id: I692afa7c911882f00d92b8e6d83889c52821e171
Reviewed-on: https://chromium-review.googlesource.com/468506
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
On keyboard-less design, we will implement a special debug mode,
based on button sequences, to transmit sysrq events to the AP.
This implements the new MKBP event to send sysrq, and a console
command to test it. Later CL will implement debug mode itself.
BRANCH=none
BUG=b:35775099
TEST=sysrq available in EC console
TEST=sysrq h => help message in AP console
TEST=sysrq b => AP reboots
Change-Id: I71d3f77497baf8cc7fac65cd040ce20513b507bc
Reviewed-on: https://chromium-review.googlesource.com/456520
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
