Change effects:
1. samus_pd: Acts as initiator of SVDM discovery once its reaches source
ready and upon identifying UFP with display port
alternate mode enters that mode.
2. hoho: Acts as responder for SVDM discovery providing its identity,
svids and svid capabilities which are display port only. If
asked to enter display port alternate mode it does.
3. fruitpie: Acts a initiator with mock display port mode.
BRANCH=none
BUG=chrome-os-partner:30645
TEST=manual,
Plug hoho into samus_pd
- see dpout
- from console
> typec 0
Port C0: CC1 451 mV CC2 111 mV (polarity:CC1)
Superspeed DP1
Change-Id: I1a76767353a69baeceffa3e79c37dcea77b8337d
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221354
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Some platforms may need to take different actions depending on which
port is requesting a limit. Add a new port parameter to the
pd_set_input_current_limit API to accomodate this.
BUG=chrome-os-partner:32003
TEST=Manual on samus_pd. Verify zinger charges battery.
BRANCH=samus
Change-Id: I1578252c751b3a80b4da6ca68e2a958934283cbf
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222621
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Allows dingdong to receive initial USB PD communication (source
capabilities payload) and with some manual manipulation (see 'TEST=')
drive DPout.
CL is based heavily off hoho dongle where all files were copied from
board/hoho:
7b1e58c ectool: Add host command support to set fan RPM for each
fan separately
Files gpio.inc, board.h & board.c were modified but others should
be identical.
BRANCH=none
BUG=chrome-os-partner:31193
TEST=manual,
When attaching dingdong to samus_pd and configured via
'pd dualrole source'
I see following on samus_pd console:
C1 st9
Switch to 5000 V 900 mA (for 900/900 mA)
C1 st10
C1 st11
C1 st12
showing power constract and transition to SRC_RDY:
> pd 1 state
Port C1, Enabled - Role: SRC Polarity: CC1 State: SRC_READY
> typec 1 dp
Also if I connect in CC1 configuration and get access to dingdong
console I can
> gpioset PD_SBU_ENABLE 1
And see dingdong drive external monitor
Change-Id: I30ef6f8503a3fb015cfb8806bc36fb98f5150e40
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221913
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
