The application may need to read/write/erase the flash memory,
but we not want console users to do so. This CL adds
CONFIG_FLASH_PHYSICAL, which allows the higher-level CONFIG_FLASH
to be undefined while still providing the chip-specific
flash_physical_* accessor functions.
There aren't many board.h files that needed changes, since
CONFIG_FLASH_PHYSICAL is enabled by default, just like CONFIG_FLASH.
BUG=chrome-os-partner:57408
BRANCH=none
TEST=make buildall; try on Gru with and without CR50_DEV=1
See that it still boots, updates, wipes, restores, etc. without
linking common/flash.o in the production image; and that the
flash commands are still there in the dev build.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I7eb1bbcb414b1c70ee427c4fcb5cea899dbb9e93
Reviewed-on: https://chromium-review.googlesource.com/391188
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Add a case statement to handle HCI commands.
Add a test commands.
Try to match the hcitool syntax, so the same commands
can be executed on a Linux host.
Added lcmd (long cmd) to pass more parameters in fewer arguments
BUG=None
BRANCH=None
TEST=Use HCI commands to configure an advertiser and listen for
it using `hcitool lescan` on the host.
Change-Id: Ie28038847c9549eb1c27a605aa0fbad5efd3b2c7
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/362145
Commit-Ready: Dan Shi <dshi@google.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
As of EVT2, remove I2C (TWI).
Use the pins for analog sensing of the battery level.
BUG=None
BRANCH=None
TEST=Sense the battery level and use the serial port.
Change-Id: I3d5d2401e61e6e7d203e933d2566f6f3cd65c054
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/361546
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Levi Oliver <levio@google.com>
This feature is inconsistent. Not all boards have such a symlink
(for a obvious reason).
This feature is fragile. It's most likely not tested and going to be
broken if not already. Developers won't like it if they have to test
two different ways to build boards before submitting patches.
This feature is not necessary. If you build EC in the standard way
(e.g. make BOARD=samus), these symlinks are not needed.
This feature is wasteful. Extra disk spaces are used and extra lines
are added to Makefile (increasing code complexity slightly).
BUG=chromium:626776
BRANCH=none
TEST=make buildall
Change-Id: Id5444284d773cb0e9225f39abd877441b8f61440
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359321
Reviewed-by: Randall Spangler <rspangler@chromium.org>
With commit e9883124ff, a GPIO_INT macro was added. That change
also required that all instances of GPIO_INT in a board's
gpio.inc file come before any GPIO macros, or the interrupt
handler wouldn't work properly.
This CL just adds a warning comment about requirement to all
gpio.inc files.
BUG=chromium:471331
BRANCH=none
TEST=make buildall, test image on Cr50
This is a change to comments only. There is no new behavior to
verify, although I did run try out one new image just to be sure
nothing stupid happened.
Change-Id: I83f7819929a53bce3a8bae04d15b3ee3bda11738
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329334
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Some chips previously defined CONFIG_I2C and others didn't. Standardize
the usage by removing CONFIG_I2C from all config_chip files and force it
to be defined at the board level. Also, make boards define
CONFIG_I2C_MASTER and/or CONFIG_I2C_SLAVE based on the I2C interfaces
they will use - this will assist with some later cleanup.
BUG=chromium:550206
TEST=`make buildall -j`
BRANCH=None
Change-Id: I2f0970e494ea49611abc315587c7c9aa0bc2d14a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/310070
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Our existing GPIO macros use port# / gpio#, but the concept of different
GPIO ports does not exist on the mec1322. Therefore, add new GPIO macros
for chips which do not have distinct GPIO ports.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: Ibda97c6563ad447d16dab39ecadab43ccb25174b
Signed-off-by: Steven Jian <steven.jian@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/262841
Reviewed-by: Anton Staaf <robotboy@chromium.org>
In the gpio_info struct, we had a irq_handler pointer defined even
though a majority of the GPIOs did not have irq handlers associated. By
removing the irq_handler pointer out of the struct, we can save some
space with some targets saving more than others. (For example, ~260
bytes for samus_pd).
This change also brings about a new define:
GPIO_INT(name, port, pin, flags, signal)
And the existing GPIO macro has had the signal parameter removed since
they were just NULL.
GPIO(name, port, pin, flags)
In each of the gpio.inc files, all the GPIOs with irq handlers must be
defined at the top of the file. This is because their enum values from
gpio_signal are used as the index to the gpio_irq_handlers table.
BUG=chromium:471331
BRANCH=none
TEST=Flashed ec to samus and samus_pd, verified lightbar tap, lid, power
button, keyboard, charging, all still working.
TEST=Moved a GPIO_INT declaration after a GPIO declaration and watched the build
fail.
TEST=make -j BOARD=peppy tests
TEST=make -j BOARD=auron tests
TEST=make -j BOARD=link tests
Change-Id: Id6e261b0a3cd63223ca92f2e96a80c95e85cdefb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263973
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add support for alternate functions for nrf51.
Add more register definitions for the nrf51.
Use assertions for conditions that should never happen.
Use BUILD_ASSERT to keep the sources in sync.
Add three more GPIOs to hadoken.
BQ27621_GPOUT - Configurable output from the fuel gauge.
LID_PRESENT_L - The input for the hall sensor.
IND_CHRG_DISABLE - The output to control inductive charging.
BUG=chrome-os-partner:34477
BRANCH=none
TEST=Used gpioget and magnets for LID_PRESENT_L
Used fuel gauge console commands to trigger BQ27621_GPOUT
Tested the assertions with gdb
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Change-Id: I508f79ae45127104fa14f9f75fbf545f226387e4
Reviewed-on: https://chromium-review.googlesource.com/234286
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Myles Watson <mylesgw@chromium.org>
Previously if you were working on a single board you had to add BOARD=
to all of your make command lines. Now if you are in a board directory
you can just use "make", or "make clean", or any other top level make
command.
This commit also adds support for a top level "make flash" command that
can be used from the board directories as well. This command uses
openocd and requires that the board provides an openocd-flash.cfg file.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=(from a few board directories) make clean; make -j
(from the discovery-stm32f072 directory) make flash
Change-Id: Ie09a74881371169a2c3cd9cd9922f39f4873f1a6
Reviewed-on: https://chromium-review.googlesource.com/209669
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Board bring up. GPIO / UART / timer / console / task / hook are
working now.
BRANCH=tot
BUG=none
TEST=run on evaluation board and see LED 0/1 are blinking.
Console commands are available to use.
Change-Id: If93a2c94b8abe1c2c931c03a7a12ddd2bed9d9f6
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209403
Reviewed-by: Vic Yang <victoryang@chromium.org>
