There are two different types of suspend states that are supported on
x86 platforms -- S3 and S0ix. When AP enters S3, the chipset state is
identified as CHIPSET_STATE_SUSPEND. On the other hand, when AP enters
S0ix, the chipset state is identified as CHIPSET_STATE_STANDBY. There
are several components within the EC e.g. charger state machine, usb
pd task, motion sense task that take actions based on the chipset
suspend state (and checked only for CHIPSET_STATE_SUSPEND until
now). In order to ensure that different EC components do not have to
worry about checking for all the different types of suspend states
that are supported, introduce a new combination
CHIPSET_STATE_ANY_SUSPEND which is a combination of
CHIPSET_STATE_SUSPEND(S3) and CHIPSET_STATE_STANDBY(S0ix).
BUG=b:69690699
BRANCH=None
TEST=make -j buildall. Ruben verified that with this change, EC power
consumption in S0ix drops from 7.85mW to 6.59mW on Soraka.
Change-Id: I599a0ea2fe2f39132764a6068fa77c3aea02affa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/786919
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When battery is fully charged, Reef starts discharging to protect
battery and starts charging again when charge level goes down
around 95%. To prevent the battery LED from showing blue with the
charger plugged in, this patch adds a new state for discharge +
nearly full. Reef shows a color indicating battery is full if
an external charger is present.
BUG=b:35775017
BRANCH=none
TEST=Fully charge Electro. Plug in OEM charger. LED lights blue.
Change-Id: I4c7c62f2c51c1d39188d1b271331984e89d5d7a3
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/448961
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch makes the battery led behave as follows:
Charge: Amber on (S0/S3/S5)
Full charge: Blue on (S0/S3/S5)
Discharge in S3: Amber on 1sec off 3sec
Discharge in S5: Off
Error: Amber on 1sec off 1sec
Discharge in S0: Blue on
BUG=chrome-os-partner:63202
BRANCH=none
TEST=Fully charge Electro, then the LED shows
with no charger in s0: blue
with charger in s0: blue
with no charger in s3: blinking amber
with charger in s3: blue
with no charger in s5: off
with charger in s5: blue
When not fully charged, the LED shows solid amber in s0/3/5.
Change-Id: Idbfbbf35b951ce73c06377f292746c8c1c3ce0fd
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/446580
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Removed power LED support.
In case of discharging, if below critical level, LED should blink;
otherwise, will show power state;
In case of charging, will show charging/battery state.
BUG=chrome-os-partner:56932,chrome-os-partner:57025
BRANCH=none
TEST=Verified on EVT with <10% and <3% battery, LED is blinking
amber at proper duty cycle.
Also verified ectool led command works as expected.
Change-Id: I903396a9a1dc5e08618683f7124b09678678e233
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/383880
Commit-Ready: Li1 Feng <li1.feng@intel.com>
Tested-by: Li1 Feng <li1.feng@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
There is only one set LED in reef, so with charger attached, LED behave as
charging LED; without charger, as power LED.
BUG=chrome-os-partner:55492
BRANCH=none
TEST=on reef proto, verified power led behavior is correct in s0/s3/g3
Change-Id: If6b83c46fc4b8b455531698177f559ca319d241a
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/366102
Commit-Ready: Kevin K Wong <kevin.k.wong@intel.com>
Tested-by: Li1 Feng <li1.feng@intel.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
