Implemented mec1322's heavysleep in idle task to
reduce further EC power down on S3.
MEC1322 needs sleep-enabled for all blocks to
acheive max power down including UART.
Real heavysleep will be effective only when
console/uart is not active.
To enable this commit, board-specific commit is required.
For example, check commit, "Enabling heavysleep idle task at S3".
Test:
1. Put device into S3 mode by typing 'powerd_dbus_suspend" in Linux
shell.
2. wait at least 1 min till EC console sleeps
3. measure EC power.
Since idle task is continuously scheduled, EC will enters/exits
to/from heavy sleep mode frequently in S3 and power consumption
will be changed dynamically.
For acurate power measurement, high-sampling-rate measurement
system might be required and using DMM might not give accurate
number.
BUG=None
TEST=Tested on evt1p0/evt1p7/DVT
BRANCH=None
Change-Id: I435ca347cab2f4d51cefeee802c3bf30fb393fa1
Signed-off-by: Kyoung Kim <kyoung.il.kim@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/283603
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
On MEC1322, we don't have indication of empty space in transmit FIFO. To
work around this, we needed to look at Tx FIFO empty bit instead. However,
this effectively made the FIFO length one. This CL fixes this by only
checking Tx FIFO empty bit every 16 characters written to Tx FIFO. This
is assuming the UART module works the same way as 16550 UART, which has
a 16-byte FIFO.
In a simple bulk write test, this improves Tx performance by 30%.
BUG=chrome-os-partner:24107
TEST=Build and boot. Check console still works.
BRANCH=None
Change-Id: I97a6f42bd11be6bb18bc339af6d9b0cf2bae4845
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/206160
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When we are calling the re-scheduling routine at the end of an irq
handling routine, we need to ensure that the high registers are not
currently saved on the system stack.
On Cortex-M3/M4, the compiler is normally doing tail-call optimization
there and behaving properly, but this fixes the fact that insanely large
interrupt handling routines where sometimes not compile and not running
properly (aka issue 24515).
This also prepares for one more core-specific DECLARE_IRQ routine on
Cortex-M0.
Note: now on, the IRQ handling routines should no longer be "static".
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:24515
TEST=make -j buildall
revert the workaround for 24515, see the issue happening only without
this CL.
Change-Id: Ic419369231925568df05815fd079ed191a5446db
Reviewed-on: https://chromium-review.googlesource.com/189153
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
This is the initial commit of mec1322 support. This includes:
- Basic GPIO driver. Interrupt not supported yet.
- Microsecond timer
- UART driver
The script to pack the firmware binary will be checked in in
following-up CL.
BUG=chrome-os-partner:24107
TEST=Build and boot on eval board
BRANCH=None
Change-Id: I9013c908049d1f740f84bb56abca51b779f39eef
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175716
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
