In this CL, we add the following changes to support the CHIP_VARIANT
npcx7m6xb and npcx7m7w:
1. Define the code RAM, data RAM, BBRAM base address/size.
2. Initialize the wov.c file for WoV driver development. (It will be
compiled only when CHIP_VARIANT=npcx7m7w in the build.mk and
CONFIG_WAKE_ON_VOICE is defined in board.h)
3. Fix the the incorrect offset of PWDWN_CTRL7 register.
BRANCH=none
BUG=none
TEST=No build errors for make buildall.
TEST=Change CHIP_VARIANT to npcx7m7w/npcx7m6xb in
board/npcx7_evb/build.mk; "BOARD=npcx7_evb make"; Check ec image can be
built. Flash the image on EVB; make sure EVB bootup.
Change-Id: I87bccb9097f8f0a6c67f96a8d90adf201ae9e773
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/858637
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The original ec_npcxspiflash lfw is used by the openocd to program SPI
flash via Servo JTAG. In order to support UUT mode to program SPI flash,
this CL modified the lfw with the following changes:
1. Rename the lfw ec_npcxflash to npcx_monitor to unify the naming.
2. The npcx_monitor will read the first 4 bytes from the area of monitor
header. If the monitor identifies the first 4 bytes is a UUT tag, it
will read parameters(SPI_OFFSET/IMAGE_SIZE) from the relative offset of
monitor header. Otherwise, it will read parameter from the general
register r0/r1 which will be restored by openocd script in advance.
3. Add monitor_hdr.c to generate the monitor header binary files
(monitor_hdr_ro.bin/monitor_hdr_rw.bin)) automatically after compiled.
The memory layout to restore the reuqired binaries are listed below:
ec firmware(RO/RW) - the start address of Code RAM area.
monitor header - 0x200C3000
npcx_monitor - 0x200C3020
BRANCH=none
BUG=none
TEST=No build errors for "make buildall".
TEST=Follow instructions in CL:826763; make sure the ec firmware is
updated and ec can boot up.
CQ-DEPEND=CL:828341
Change-Id: I5de997a4dee5449d578972e2f929c6e08c5dff67
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/826909
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
This CL implements two methods for hibernating on npcx7 ec. One is using
PSL (Power Switch Logic) circuit to cut off ec's VCC power rail. The
other is turning off the power of all ram blocks except the last code
ram block. In order to make sure hibernate utilities are located in the
last code ram block and work properly, we introduce a new section called
'after_init' in ec.lds.S.
We also moved the hibernate utilities, workarounds for sysjump and so on
which are related to chip family into system-npcx5/7.c. It should be
easier to maintain.
It also includes:
1. Add CONFIG_HIBERNATE_PSL to select which method is used on npcx7 for
hibernating.
2. Add new flag GPIO_HIB_WAKE_HIGH to configure the active priority of
wake-up inputs during hibernating.
3. Add DEVICE_ID for npcx796f.
BRANCH=none
BUG=none
TEST=No build errors for all boards using npcx5 series.
Build poppy board and upload FW to platform. No issues found. Make
sure AC_PRESENT and POWER_BUTTON_L can wake up system from
hibernate. Passed hibernate tests no matter CONFIG_HIBERNATE_PSL is
enabled or not on npcx796f evb.
Change-Id: I4e045ebce4120b6fabaa582ed2ec31b5335dfdc3
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/493006
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This CL added support for 8 i2c controllers and 11 i2c ports in
npcx7 series ec. we also added i2c-npcx5/7.c and moved the functions
related to chip family to them. (Such as i2c_port_to_controller(),
i2c_select_port() and so on.) Note the layout and bit position of i2c
registers which are accessed in these functions are irregular between
npcx5 and npcx7. We think abstracting them from i2c.c is easier to
maintain.
In this CL, we also modified the checking rule for I2C_PORT_COUNT in
task.h in order to prevent compiler error. So far, the ECs besides
stm32 only use TASK_EVENT_I2C_IDLE to wait for i2c hardware completes
its job. Put (I2C_PORT_COUNT > TASK_EVENT_MAX_I2C) checking rule
for all ECs seems not suitable.
It also includes
1. Remove useless NPCX_I2C_PUBIT macro function.
2. Remove useless NPCX_PWDWN_CTL_COUNT in registers.h.
3. Add CGC_OFFSET_I2C2 and CGC_I2C_MASK2 to power down the other 4 i2c
controllers of npcx7 ec.
BRANCH=none
BUG=none
TEST=No build errors for all boards using npcx5 series.
Build poppy board and upload FW to platform. No issues found.
All 8 i2c controllers and 10 ports (npcx796f supports PSL.) passed
i2c stress tests on npcx796f evb.
Change-Id: I2b5076d21bcd0f8d17fd811cad2ff7bd200b112a
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/487541
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This CL includes:
1. Add CHIP_FAMILY_NPCX5/7 and CHIP_VARIANT_NPCX7M6F to distinguish
which npcx's ec is used on the board.
2. Add config_chip-npcx5/7.h files and move features depend on chip
family into them.
3. Add NPCX_INT_FLASH_SUPPORT, NPCX_PSL_MODE_SUPPORT and
NPCX_EXT32K_OSC_SUPPORT to determine which features are supported on
npcx7 ec. We'll use them later in gpio/system/flash drivers.
4. Add ram size checking for all npcx ec series.
BRANCH=none
BUG=none
TEST=No build errors for all boards using npcx5 series (besides gru).
Build poppy board and upload FW to platform. No issues found.
Change-Id: Ia932996d01da71fea73ddd545255bdd59e581bcf
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/481560
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The application may need to read/write/erase the flash memory,
but we not want console users to do so. This CL adds
CONFIG_FLASH_PHYSICAL, which allows the higher-level CONFIG_FLASH
to be undefined while still providing the chip-specific
flash_physical_* accessor functions.
There aren't many board.h files that needed changes, since
CONFIG_FLASH_PHYSICAL is enabled by default, just like CONFIG_FLASH.
BUG=chrome-os-partner:57408
BRANCH=none
TEST=make buildall; try on Gru with and without CR50_DEV=1
See that it still boots, updates, wipes, restores, etc. without
linking common/flash.o in the production image; and that the
flash commands are still there in the dev build.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I7eb1bbcb414b1c70ee427c4fcb5cea899dbb9e93
Reviewed-on: https://chromium-review.googlesource.com/391188
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Add espi driver for x86-based platform which support espi interface such
as skylake and so on.
Added source:
1. espi.c: Add drivers which supports the utilities of peripheral and
virtual-wire channels so far.
2. espi.h: Add espi virtual-wire declaration for power sequence FW.
Modified sources:
1. lpc.c: Add interrupts and initialization steps for espi.
2. gpio.c: Add interrupt handler of espi reset.
BRANCH=none
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
Change-Id: Ie80afe79d85aba47fc0b72898a8374c2898ec114
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/366181
Reviewed-by: Randall Spangler <rspangler@chromium.org>
CONFIG_SHI ("SPI host interface") has identical meaning to
CONFIG_HOSTCMD_SPS ("Accept EC host commands over the SPI slave"). Use
CONFIG_HOSTCMD_SPS, since it came first and is already defined in config.h.
BUG=chrome-os-partner:50819
BRANCH=None
TEST=`make buildall -j`
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I665c405ad72caa3b84e583a80c0893e4c625632a
Reviewed-on: https://chromium-review.googlesource.com/331342
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
In order to support 256 KB ram version of npcx ec, we add CHIP_VARIANT
variant to distinguish which verson ec is.
In config_chip.h, we use CHIP_VARIANT to specify the size and start address
of program memory. Ecst tool also needs a chip parameter to make sure
the address range checking of entry pointer won't fail.
Modified sources:
1. config_chip.h: Use CHIP_VARIANT to specify the different hardware spec
of npcx ec.
2. config_flash_layout.h: Replace constant value with
CONFIG_PROGRAM_MEMORY_SIZE for CONFIG_RO_SIZE.
3. build.mk: Add -chip parameter for ecst tool to check entry address.
4. npcx_evb\build.mk: Add CHIP_VARIANT definition (npcx5m5g).
5. npcx_evb_arm\build.mk: Add CHIP_VARIANT definition (npcx5m5g).
6. wheatley\build.mk: Add CHIP_VARIANT definition (npcx5m5g).
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I1b8b9b9d0a59bdc01210f498ac67e4a342743b47
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/330072
Tested-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Modified drivers:
1. register.h: Add marco field operation funcs for muti-bits field of register.
2. adc.c/fan.c/pwm.c: Simplify field operations by marco funcs.
3. adc.c: Add support for ADC_CH3/4
4. pwm.c: Add PWM_CONFIG_DSLEEP_CLK flag
6. fan.c: Support multi-fans mechanism
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Iaaeb6c4ae8d55b4245a1cefb9c20feae4c0fdec2
Reviewed-on: https://chromium-review.googlesource.com/300673
Commit-Ready: Mulin Chao <mlchao@nuvoton.com>
Tested-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add ECST tool to modify the header used by npcx booter.
Modified drivers:
1. i2c.c: Modify for i2c_port design.
2. i2c.c: Fixed bugs when mutil-tasks use the same i2c port and pull-up issue.
3. hwtimer.c: Fixed bug whcih event expired time is behide current timer.
4. lpc.c: Add intializing host settings after pltrst is deasserted.
5. uart.c/clock.c/register.h: Fixed bug which cannot enter deep-idle
when gpio is any-edge trigger mode.
6. task.c: Add workaround method for hard fault issue.
7. keyboard_raw.c: Modified for support CONFIG_KEYBOARD_KSO_BASE
8. lpc.c: Modified for support CONFIG_KEYBOARD_IRQ_GPIO
9. lpc.c: fixed obe interrupt bug during 8042 initialization
10.Adjust path of flat files for new Makefile rules
11.Fixed build error on lpc.c without CONFIG_KEYBOARD_IRQ_GPIO
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Icf9494174b245b4026e396be877d578f36b6f6a5
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/284036
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
Add npcx_evb_arm board-level driver for arm-based platform.
Add header.c: for booting from NPCX5M5G A3 Booter.
Remove lfw folder due to those functionalitie have been replaced with Booter
Modified drivers for
Patch Set 1:
1. flash.c: Implement UMA lock, tri-state and selection register lock functionalities
2. hwtimer.c: Add ITIM32 for hwtimer
3. lpc.c: Add checking for LRESET
4. system.c: Modified CODERAM_ARCH functions for NPCX5M5G A3 Booter.
5. uart.c: Add support for module 2
Patch Set 2:
6. lpc.c: Modified lpc_get_pltrst_asserted() func
Patch Set 3:
7. minimize the changes for CONFIG_CODERAM_ARCH in common layer
8. comments of Patch Set1/2
Patch Set 4:
9. Modified CONFIG_RO_MEM_OFF point to ro image and keep header as a part of ec.RO.flat.
10. Fixed RO_FRID and RW_FRID issues which caused by CONFIG_CODERAM_ARCH.
Patch Set 5:
11. Modified system.c in common folder for supporting *_STORAGE_OFF.
12. Use *_STORAGE_OFF in firmware_image.lds.S to indicate flat file layout in flash.
Patch Set 6:
13. rebase to newest version
14. system.c: Modified for the newest include/system.h
Patch Set 7:
15. Merge from version 0625
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ifd7c10b81b5781ccd75bb2558dc236486976e8ed
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/272034
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
Issues fixed on 0216:
1.Modified CONFIG_KEYBOARD_COL2_INVERTED support in keyboard_raw.c
2.Modified warm_reset checking in gpio.c
3.Modified system_get_chip_name in system.c for package info.
4.Modified fan.c and pwm.c for:
● If the DCRn value is greater than the CTRn value, the PWM_n signal is always low.
● Fan stall condition event:
If the measured fan speed is lower than the lowLimit value (unless the Fan Speed Low Limit value is 0) or in case of erroneous measurement, the userCallback is called.
5. Change cycle_pluses to 480 in board.c
Issues fixed:
1. Jump data at top of RAM is getting corrupted. Changed the flag to
RESET_FLAG_RESET_PIN. Added a workaround method to fix VCC1_RST
issue.
2. Hibernate wake need to report whether wake reason was GPIO or RTC
3. Hibernate wake must be distinguishable from watchdog reset. The
booter will log reset reason in Code RAM. I copy the log data to
battery-backup RAM in little FW. And system driver will refer this
data to distinguish if it's watchdog reset or not.
4. Watchdog reset flag is not set. Same fix as 3.
5. Should return error if unable to clear SPI flash status register.
6. Remove chip_temp_sensor.c
7. Remove use of pstate from flash driver
8. Remove support for watchdog warm reset
9. Keyboard raw driver must support COL2 inverted
10. LPC memory mapped data must be read-only from host
11. LPC should support PLTRST# signal
12. Problems reading chip type/version. Use core registers and ROM data to read IDs.
13. When chip type/version is unknown, report hex value.
14. Watchdog does not consistently print panic information.
15. Remove console force enable logic.
16. Enable only the peripheral clocks that are needed. Please notice
user should add bit mask in CGC_XXX_MASK if they want to enable
additional module. For example, if user wants to enable PWM3, he must
add PWDWN_CTL2_PWM3_PD bit in CGC_PWM_MASK.
Please see HOOK_FREQ_CHANGE and HOOK_INIT these two hook functions.
If I turn off all I2C modules in system_pre_init and turn on the
modules I need in i2c_init, I found its freq is not correct. The root
cause is hook_notify(HOOK_FREQ_CHANGE) is executed first (in
clock_init) before i2c_init. At this time, i2c modules are power-down
and writing to freq register is useless. I re-execute freq-changed
hook function after turning on modules again.
17. MPU properly configured to prevent code execution from data RAM
18. Partial nvcontext implementation. Copy these 16 bytes in our battery-backup RAM.
Additional items we also modified:
1. pwm.c: Support open-drain IO type of PWM. (PWM IO-Type cannot by
determined by GPIO, we use bit 1 & 2 of function byte of gpio_alt_func
array to support it)
2. ec_npcxflash.c: Use definition to replace constant value. Stop
watchdog during flash programing.
3. npcx_cmds.tcl: Adjust script sequence for robustness. Add unlock
MPU commands for Data RAM.
BUG=chrome-os-partner:34346
BRANCH=none
TEST=manually verify changes
Change-Id: I722a77d29e7543b054819480c7b7477af4263119
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/248670
Add npcx_evb in board folder for testing
Add shared-spi arch support in common layer.
Modified drivers for
1. Fan.c: console command “pwmduty”.
2. Pwm.c: for the issue when set duty to 0.
3. System.c: for hw reset only during system reset.
4. Flash.c: Fixed access denied bug of the flash driver for host command.
5. Comments from Patch Set 1
6. Comments from Patch Set 3 (except sha256.c)
7. Add openocd and flash_ec support for npcx_evb
8. Add little FW and spi-flash upload FW in chip folder
9. Add optional make rules for PROJECT_EXTRA
10.Replace CONFIG_SHRSPI_ARCH with CONFIG_CODERAM_ARCH and remove changes
in common layer sources for shared-spi arch. (except sysjump)
11.Find the root cause of JTAG issue and use workaround method
with SUPPORT_JTAG in clock.c
12 Execute hibernate in low power RAM for better power consumption
13 Add workaround method for version console command
14 Modified coding style issues by checkpatch.pl tool
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I5e383420642de1643e2bead837a55c8c58481786
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233742
