This patch lowers the priorities of other chargers so that dedicated
chargers are given the highest priority.
Dedicated chargers are adapters shipped with the device and do nothing
but being the power source. Thus, when they're connected, it should be
always used even if other suppliers offer more power.
BUG=b:38321259
BRANCH=none
TEST=make runtests
Change-Id: Ida862eb31c7f9ede36cade99f53645196b6a3f70
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/762339
Reviewed-by: Shawn N <shawnn@chromium.org>
Usually, the max current and supply voltage of dedicated chargers
are not known to the EC.
This patch adds EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT, which
allows the host to change the max current and supply voltage of the
dedicated charge port.
BUG=b:64442692
BRANCH=none
TEST=make runtests && buildall. Boot Fizz and let coreboot set
the adapter current and voltage.
Change-Id: I29b3f5762f8b316ca363c23e230530cdf4ca207a
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/769152
For now we guard charger-based VBUS voltage measurement
behind CONFIG_USB_PD_VBUS_DETECT_CHARGER.
But we should be able to measure VBUS voltage by charger
while detecting VBUS presence by other methods.
BUG=b:67991345
BRANCH=none
TEST=plug in guppy on Scarlet rev2, 'ectool usbpdpower' on console,
and see VBUS is measured as 4975mV
Change-Id: I94cada81159ea4b097001997e2444873ec2d8763
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/789910
Commit-Ready: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
This patch allows Fizz to switch the power source from a type-c
charger to a barrel jack adapter if the system is in S5.
BUG=b:38321259
BRANCH=none
TEST=Verify the following with 45W and 60W type-c chargers:
1. Boot Fizz with a type-c charger
2. Go to S5 if not already.
3. Plug in a BJ adapter. Fizz boots to S0 using BJ power.
Also verified other boot modes are not affected:
1. Auto boot on BJ insert
2. Auto boot on Type-C insert
3. Recovery boot on BJ
4. Recovery boot on Type-C
5. Stay off if it's previously S5
Change-Id: I86aa0fe6e403bcbacfe396997d897111ffcf8e74
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/706251
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Charge port / current selection often needs to be significantly altered
when a battery cannot provide sufficient charge, so have charge_manager
initially enter safe mode. After a battery with sufficient capacity has
been identified, charge manager will leave safe mode, and port / current
selection will return to standard rules.
BUG=chromium:777596
BRANCH=None
TEST=Pass charge_manager unit tests. On kevin, remove battery, attach
Apple PD charger, verify safe mode is not exited and device does not
brown out. Hot-plug battery and verify safe mode is exited. Next,
remove battery, attach to Samus, verify safe mode is not exited and
device doesn't brown out. Hot-plug battery, verify that safe mode is
exited and no active charge port, due to dual-role exclusion.
Change-Id: I7784865750087a037aad8dbbac058b22c77ba6d4
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/733954
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
suzy-qable advertises 1.5A, but its actual capability depends on the
host USB port it is attached to. Since suzy-qable is ubiquitous and
other DTS sources may behave in the same way, ramp the input current
limit in order to find a reasonable maximum.
BUG=chromium:770296
BRANCH=None
TEST=Attach suzy-qable to kevin and reef, verify that neither OCs and EC
console via cr50 is available on reef. Also verify donette chargers
kevin at 3A and does not ramp.
Change-Id: Idd0683ede3a44111a01da6b4faab52f388ee82fd
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/693295
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The decision on whether to ramp (and how high) depends on the quirks of
charger identification, so move the decision out of board, into the
drivers that implement usb_charger.
Also, rename CONFIG_CHARGE_RAMP to CONFIG_CHARGE_RAMP_SW, to better
contrast with the existing CONFIG_CHARGE_RAMP_HW.
BUG=None
TEST=Manual on kevin, verify ramp occurs when port plugged into Z840
workstation.
BRANCH=None
Change-Id: I5b395274133837a18a4f4ac34b59b623287be175
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/702681
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Boards that use charge_manager have identical implementations of
typec_set_input_current_limit() and pd_set_input_current_limit(), so
move these functions to charge_manager.
BUG=b:67413505
TEST=`make buildall -j`, also verify that fizz continues to power-on and
boot AP, in both protected and unprotected mode, with barrel jack power
and with zinger.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I99a5314d02c4696db944c0f8ac689405f4f1f707
Reviewed-on: https://chromium-review.googlesource.com/701412
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This patch adds USB_CHG_TYPE_DEDICATED to enum usb_chg_type. It's
for dedicated AC adapters like a barrel jack adapter used for Fizz.
BUG=b:65591971
BRANCH=none
TEST=make buildall
Change-Id: Ib883c97eb5e468753c73453d7dedd228547ae025
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/665327
Reviewed-by: Shawn N <shawnn@chromium.org>
This patch gives the highest priority to dedicated chargers. It
means if a dedicated power supply is being connected, other power
supplies such as USB-C adapters will not be recognized as a new
charger.
BUG=b:65059574
BRANCH=none
TEST=Boot Fizz on BJ adapter. Verify plugging in Type-C adapter
doesn't shut down the system.
Change-Id: Ie49b128ae64f917a227f9081148565a3f5356212
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/655638
Reviewed-by: Shawn N <shawnn@chromium.org>
When CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT is defined for a board, as
its name implies, the board can source a higher current if there is
only one port acting as a source.
This commit fixes an issue with selecting the right source capability
message to advertise. charge_manager_get_source_pdo() was simply
checking if there was more than one sink connected, instead of checking
if there were any *other* sinks connected. In the event that a sink
was connected to a different port, we would advertise the max source
PDO.
BUG=b:64037926, b:35577509
BRANCH=gru,eve,reef
TEST=Connect sink to port 1. Connect a AMA to port 0 that claims that
VBUS isn't necessary. Start sending source caps, verify that the max
PDO is not being advertised in the source caps.
Change-Id: Ie4145ecaf98d5b9070ad3e8b139e5653685fa801
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/610479
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
This patch adds a dedicated charge port. The number of such ports
is specified by CONFIG_DEDICATED_CHARGE_PORT_COUNT. It works as a
sink only. The total number of charge ports is represented by
CHARGE_PORT_COUNT.
BUG=chromium:721383
BRANCH=none
TEST=make buildall. Boot Fizz off of barrel jack.
Change-Id: Ibbb11f3e1c66e35b5abe190e49161eeaa2009994
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/501468
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
charge_ramp needs to make a decision based upon the VBUS level on one
specific port - the port that is ramping. The VBUS level on any other
charge ports (if present) is not relevant.
BUG=chrome-os-partner:54099
BRANCH=reef, gru
TEST=With subsequent patches, verify charge_ramp success with a variety
of BC1.2 chargers.
Change-Id: Ie0a51a577e2b7491222560cd08dd5321ff3b7975
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/435561
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
From the USBC spec 1.2 "Table 4-14 Precedence of power source usage"
USB Type-C 3.0 A & 1.5 A takes precedence over BC1.2 hence updated
the power supplier priority of charger manager.
BUG=chrome-os-partner:61420
BRANCH=none
TEST=Manually tested on reef. Donette bottom port can switch
from 1.5A to 3A upon high load.
Change-Id: Iff936d6a8643e88e0b2738251254e896fe8562fe
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/430153
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
A valid charge port is always detected as VBUS supplier type, 'USB charger'
can detect the same port as BC1.2 DCP supplier type & also 'TCPC' can
detect the same port as TYPEC supplier type. Thus a valid port is detected
as 2 or 3 supplier types. Depending on the supplier's priority and the
power that the supplier can provide, charge manager choses the charge
supplier type of the port.
If the USB charger detected supplier is BC1.2 DCP and the TCPC detected
supplier is TYPEC then the supplier can provide stable current from TYPEC
supplier's advertised current hence start ramping from TYPEC supplier's
advertised current.
BUG=chrome-os-partner:61420
BRANCH=none
TEST=Manually tested on reef. Donette bottom port can switch
from 1.5A to 3A upon high load.
Change-Id: I871eca3ae4041f00bb3fd50e6aa939643f30a1f2
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/427961
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
If battery is not present, input current is set to PD_MAX_CURRENT_MA.
If the input power set is greater than the maximum allowed system power,
system might get damaged. Hence, limit the input current to meet maximum
allowed input system power.
BUG=chrome-os-partner:58498
BRANCH=none
TEST=Manually tested on Reef. Removed the battery & using 'charger'
console command observed the following.
With Zinger charger at 20V - Input current is set to 2.25A
With Type-C & other chargers - Input current is set to 3A
Change-Id: Ife8686f322e095aa74b740a7c469bfe87107fb9a
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/397865
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Upon requesting a PD power contract at a new voltage, keep the input
current limit at 500mA until PD_RDY is received.
BUG=b:30744563,chrome-os-partner:59311,chrome-os-partner:44340
BRANCH=ryu, gru, glados
TEST=Manual on kevin, set ilim to 5V through `chglim` console command,
attach zinger. Set ilim to 20V through `chglim`, verify that ilim goes
from 3A to 500mA to 3A.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I452f183cfb958780e336a9f99dc6398356de17a0
Reviewed-on: https://chromium-review.googlesource.com/399918
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When kernel get EC_HOST_EVENT_PD_MCU event and query power state, we may
not done refresh here. Delay EC_HOST_EVENT_PD_MCU event to avoid this
race.
BUG=chrome-os-partner:59499
BRANCH=gru
TEST=Manual on kevin, check power state correct after unplug charger
Change-Id: Ib88acf5a39c2780c6e40144ccebfba17cf84f77c
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/408131
Commit-Ready: Douglas Anderson <dianders@chromium.org>
Tested-by: Wonjoon Lee <woojoo.lee@samsung.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
When sourcing current on the type-C port, set the OCP limit on the VBUS
load switch according to current dynamic capability.
(3.0A when only one port is a power source, 1.5A else)
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=gru
BUG=chrome-os-partner:56110
TEST=manual: connect Caroline to Kevin with Twinkie in between,
ask Caroline to sink current through the UI.
without anything else connected on Kevin, see 3A flowing when measuring
with Twinkie ('tw vbus'), plug a dangling C-to-A receptacle dongle on
the other Kevin port and see 1.5A flowing through Twinkie.
Force the input current limit on Caroline to 3.0A and see Kevin cutting
VBUS.
Change-Id: Ib879b1ed720b20aa702c5f3643948ba0575d1193
Reviewed-on: https://chromium-review.googlesource.com/403869
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
If charge_manager has not decided on a current limit, don't set a
minimum current limit, since we may brown-out in the no / low-battery
case.
BUG=chrome-os-partner:56139
BRANCH=None
TEST=Manual on kevin, attach cut-off battery, attach OEM charger, verify
system doesn't brown-out due to OC.
Change-Id: Id53eb32c4a8ac9c6d9a0d3f1d700f089a50fcb0f
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/386793
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
charge_manager may request a charge current limit less than the
capability of the supply in certain cases (eg. during PD voltage
transition, to make an effort to comply with reduced load spec).
Depending on the battery / system state, setting a reduced charge
current limit may result in brownout.
Pass the uncapped / max negotiated current to board_set_charge_limit()
so that boards may use it instead of the requested limit in such
circumstances.
BUG=chrome-os-partner:56139
BRANCH=gru
TEST=Manual on kevin with subsequent commit, boot system with zinger +
low-charge battery, verify devices powers up to OS without brownout.
Change-Id: I2b8e0d44edcf57ffe4ee0fdec1a1ed35c6becbbd
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/383732
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Record what current limit we set when we act as a source
and when we are changing it.
The change should be backward-compatible as older EC will return 0 in
`current_max` when their role is PD_ROLE_SOURCE while newer firmware
will set the actual limit.
BRANCH=none
BUG=chrome-os-partner:56110
TEST=manual: on Kevin, plug and unplug various devices on the 2
ports, and dump the values with 'ectool usbpdpower'.
Change-Id: I8e78663f3196b1b81c2235ed8642da0638bed649
Reviewed-on: https://chromium-review.googlesource.com/375918
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Add a policy to handle the case where the device can source the
`CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT` over one of its type-C port if
there is no sink connected on the other ones.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:56110
TEST=manual: on Kevin, plug and unplug various devices on the 2 ports,
while measuring the type-C pull-up with Twinkie.
Change-Id: Id5961f04d0a1b1073f5ab340068efd9079918209
Reviewed-on: https://chromium-review.googlesource.com/373818
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
When the charger is detached, the host event would sometimes be
sent before the charge info was updated, resulting in the host
thinking that the charger was still connected.
BUG=chrome-os-partner:55584
BRANCH=none
TEST=Connected charger to kevin 15 times and verified that the
icon was removed in 2-seconds or less.
Change-Id: I1a4e4e0f7cc23010210570fc261da8308d8e8070
Reviewed-on: https://chromium-review.googlesource.com/367809
Commit-Ready: Wonjoon Lee <woojoo.lee@samsung.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
For the purpose of spoofing dual-role capability, treat
soft-disconnected batteries as not present, since they are not capable
of supplying a current until they are revived.
BUG=chrome-os-partner:55617
BRANCH=None
TEST=Manual on kevin w/ subsequent CL. Put battery into soft-disconnect
state. Attach charger and verify EC doesn't lose power and battery again
supplies current.
Change-Id: Ie6b83b3d4e1e33c4bbbd1a90450506e7dcd1dfb2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/363003
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Added code to get the VBUS level by reading the charger registers.
BUG=chrome-os-partner:55117
BRANCH=none
TEST=Manually tested on Amenia, VBUS_VAL (5Ch) & VCC_VAL (5Eh)
registers are updated with the correct VBUS value on the
respective ports.
Change-Id: I3b019b2d87e4c347f12596df387a2a659092ae25
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/359416
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
If our battery isn't able to provide enough power to the EC on boot, we
should not cut off our input power, regardless of dual role
determination or other charging policy.
BUG=chrome-os-partner:54058
BRANCH=None
TEST=Manual on gru. Drain battery completely, attach USB-C charger,
verify that "Battery critical, don't disable charging" is seen on the
console and the EC doesn't brown out.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I981f9dbf3d84390550bb696e561f5fa51ffc573a
Reviewed-on: https://chromium-review.googlesource.com/351224
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Initialize the charge suppliers after change manager is initialized,
otherwise charge supplier current & voltage values will be overwritten
to -1 by the charge manager ini function.
BUG=chrome-os-partner:53788
BRANCH=None
TEST=Observed there are no "CL: p(port) s(supplier) i-1 v-1" prints
on the EC console.
Change-Id: Id0212c502d5833c016ac79ee15d21304d6d7ceb2
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/347896
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Always call board_set_active_charge_port() on the first pass through
charge_manager_refresh(), in case actions must be taken once the
CHARGE_PORT_NONE selection is confirmed.
BUG=None
BRANCH=None
TEST=Attach unpowered peripheral without AC and powerbtn, make sure ap boot-up
Change-Id: I4bcf1d548d7a8c80f4395fc90ff499fce33c8373
Signed-off-by: Wonjoon Lee <woojoo.lee@samsung.com>
Reviewed-on: https://chromium-review.googlesource.com/341076
Reviewed-by: Shawn N <shawnn@chromium.org>
Previously calls to hook_call_deferred were passed the function to call,
which was then looked up in the .rodata.deferred section with a linear
search. This linear search can be replaced with a subtract by passing
the pointer to the deferred_data object created when DECLARE_DEFERRED
was invoked.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
CQ-DEPEND=CL:*255812
TEST=make buildall -j
Change-Id: I951dd1541302875b102dd086154cf05591694440
Reviewed-on: https://chromium-review.googlesource.com/334315
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
After a charger is attached, we may set a charge limit based upon BC1.2
or USB-C Rp before PD negotiation completes. Therefore, allow 2 seconds
for all negotiation to complete. Previously this behavior was implicit
when using SW charge ramp.
BUG=chrome-os-partner:51280
BRANCH=glados
TEST=Manual on chell. Insert stock charger, verify that it is detected
as TYPE_UNKNOWN until timeout.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I52f02de46fa92b66a9fbaddb94a062310688f028
Reviewed-on: https://chromium-review.googlesource.com/334312
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
- Send host commands to TCPCs based upon CONFIG_HOSTCMD_PD, since
boards with off-the-shelf TCPCs will also have a PDCMD task.
- Don't log VBUS voltage if we have no VBUS ADC channel.
BUG=chrome-os-partner:50819
BRANCH=None
TEST=`make buildall -j` with subsequent kevin board commit.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I33347402ec31e1754ad8e9a62814d5c1f345737d
Reviewed-on: https://chromium-review.googlesource.com/331343
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Battery in cut-off mode wakes when voltage is applied to the PACK
and takes approximately 2 to 3 seconds to initialize before capable
of providing the power. Hence made the battery present status to
BP_NO in case of cut-off mode. Once the battery is ready new status
is updated as BP_YES.
When the battery status changes from BP_NO to BP_YES, charger input
current is set to board specific charger input current which is not
sufficient to boot the AP hence the system reboots. To avoid this
issue, added code to write charger manager negotiated current to
charger input current when the battery status changes from BP_NO to
BP_YES.
BRANCH=none
BUG=chrome-os-partner:49224
TEST=Manually tested on Kunimitsu.
Used console command 'cutoff' to put the battery in cut-off mode.
Inserted the adopter to wake the system, system doesn't reboot &
the battery charges.
Change-Id: Ia5a1457506b4bef0b3dd27993e4b60ae64c8f746
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/322430
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Add HW charge ramping option and enable on glados.
Modify charge_manager to enable/disable HW charge ramping
when option is defined.
Unfortunately, the isl9237 doesn't have a way to determine
what the input current limit has settled on, so the EC will
always report the max input current for that supplier.
BUG=chrome-os-partner:47335
BRANCH=none
TEST=plug in CDP, SDP, DCP, type-C, and PD charger. Make sure
we ramp to a reasonable value for the correct suppliers.
Make sure we don't ramp for type-C and PD chargers.
Change-Id: Ib541fa0be48d8f4d261c71b853b0ee72b2adbf6b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/311301
Reviewed-by: Shawn N <shawnn@chromium.org>
Add support for two new configs to specify critical energy battery
percentage and critical external charger power. When we are under both
thresholds, set the LIMIT_POWER charger parameter to inform the AP that it
should conserve power to avoid brownout, and consider jumping to EC RW
to negotiate PD.
In addition, modify the existing CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON
to allow power-up regardless of power level if a 15W+ charger is
attached, since there is a reasonable chance it may speak PD and provide
sufficient power to boot the AP.
BUG=chromium:537269
TEST=Manual on Glados. Set CHG_MW thresh to 20000, BAT_PCT to 50. Verify
that LIMIT_POWER charger param is set until Zinger negotiates to 20V. Also
veify that system can boot with Donette.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ic963c82fea4ad10e8a5d7e476c5ce3e5ae525dad
Reviewed-on: https://chromium-review.googlesource.com/306774
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Fix override host command so that if we are in the middle of
power swapping to handle one override command, that we return
an error if another override command is received.
BUG=chrome-os-partner:44958
BRANCH=smaug
TEST=make -j buildall
Change-Id: I2503120aed76b82166dd36a45c410f2b6ea921bd
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/297837
Reviewed-by: Shawn N <shawnn@chromium.org>
Move asking for a power swap to become a source to happen
anytime we stop charging from a dual-role port. We used to
ask for a power swap when a dual-role override port was
cancelled, but with CONFIG_CHARGE_MANAGER_DRP_CHARGING we
can be charging from a dual-role port without having chosen
it as the override port, so this guarantees that we always
ask to become the source when we stop charging from a port.
BUG=chrome-os-partner:44958
BRANCH=smaug
TEST=build and run unit tests
Change-Id: I009178b479a4626888d11a9993c8738d928fbaf9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/297880
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Add option to charge automatically from dual-role devices. This
also changes the charge override behavior such that any new
device attached will clear the override because any new source
is a potential device we might charge from.
BUG=chrome-os-partner:44958
BRANCH=smaug
TEST=tested charge_manager unittests with
CONFIG_CHARGE_MANAGER_DRP_CHARGING both defined and undefined
Change-Id: Iac77ff0c501826d5fb5a9d50f88399ebc3955b87
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/297789
Reviewed-by: Shawn N <shawnn@chromium.org>
PD charger voltage + current can now be limited with
EC_CMD_EXTERNAL_POWER_LIMIT. The limit is automatically cleared when the
AP transitions out of S0 into S3 / suspend.
BUG=chrome-os-partner:43285
TEST=Manual on Samus w/ zinger.
- Plug zinger, verify charging at 20V/3A.
- `ectool extpwrlimit 3000 12000 --dev=1`, verify charging at 12V/3A
- `ectool extpwrlimit 1000 5000 --dev=1`, verify charging at 5V/1A
- Plug zinger into other port, verify still charging at 5V/1A
- `powerd_dbus_suspend`, verify charging at 20V/3A
- `chglim 2000 12000`, verify charging at 12V/2A
- `ectool extpwrlimit 0xffff 0xffff --dev=1`, verify charging at 20V/3A
- `chglim 1000 20000`, verify charging at 20V/1A
- `chglim`, verify charging at 20V/3A
BRANCH=ryu
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6cd5377be91b3df75f99cb414fd3fa5a463b56cb
Reviewed-on: https://chromium-review.googlesource.com/293954
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
We will soon have a need to independently set a charge ceiling from both
the PD state machine and from incoming host commands. Store these
ceilings separately, and have the minimum take effect.
BUG=chrome-os-partner:43285
TEST=Pass unit tests. Also, host command current limit takes effect with
subsequent commit.
BRANCH=None
Change-Id: I0ecfe888a7df0d5da5a68999c164c7c841da348b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/293818
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Remove board function callback on charge override timeout, since
the implementation should be common to all boards: send host event.
This function is called when a power swap fails during an issued
charge override and notifies the host so that it is aware that the
power swap did not succeed.
BUG=none
BRANCH=smaug
TEST=make -j buildall
Change-Id: Ia2a078a17aef6b302fd2b9fd21a5a92c628fd7db
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284923
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Take profit of the hardware input current ramping/back-off integrated
in the BQ2589x charger by setting the current limits higher for BC1.2
USB modes and letting the hardware adjust to the actual charger
limitation depending on the VBUS voltage droop.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=smaug
BUG=chrome-os-partner:42045
TEST=Connect a Nexus 9 DCP charger to Smaug and see the input current
adjusted to 1650mA without brown-out, read back the value properly from
the AP:
$ ectool usbpdpower
Port 0: SNK Charger DCP 4958mV / 1650mA, max 5000mV / 1650mA / 8250mW
Change-Id: I348e5ee4980a5652f72f279ab4e3a7126583b093
Reviewed-on: https://chromium-review.googlesource.com/282584
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
We normally do not charge from non-dedicated chargers. The process of
determining whether a charger is dedicated or not involves PD protocol
communication, so it can take some time to reach a determination. If no
battery is attached, the charger is likely our only source of power, so
don't cut it off.
BUG=chrome-os-partner:41258
TEST=Attach donette to glados system with no battery, verify that glados
boots to EC console and doesn't reset or panic.
BRANCH=None
Change-Id: I7c9cfcbd37b37ef16010cf1f246d8fddba6f6283
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/277074
Reviewed-by: Alec Berg <alecaberg@chromium.org>
