There might be more than one place that will use very similar codes in
CL:542716 (usb_i2c.c). To avoid unnecessary duplication of code, we fold
the logic into i2c_xfer(). With config enabled (illustrated in this CL),
i2c_xfer() will support large reading. An early prototype of potential
usage is demostrated in CL:781300.
BRANCH=none
TEST=For CONFIG_I2C_XFER_LARGE_READ:
With proprietary software on slave: ./touchpad_updater -d
TEST=For usb_i2c regression:
./touchpad_updater still works (where the reading is less than 255)
TEST=For generic EC regression test:
On poppy EC (With CONFIG_I2C_XFER_LARGE_READ defined)
(1) Prevent override of update
/usr/share/vboot/bin/set_gbb_flags.sh 0xa39
(2) flashrom -p ec -w ec_binary_contains_this_CL.bin
(3) ectool reboot_ec cold
(4) "ectool version" verified that both RO/RW/Build info is local.
(5) Test with a type-C DP dongle on DELL 2408WFP.
(6) Plug-in type-C charger and external display still works.
(7) Confirmed that battery is charging.
(7) "ectool battery" reads same data (for fixed field) as before.
(8) "ectool usbpdpower", confirmed charger info displayed as before.
(9) "ectool usbpd 0", confirmed content exactly as before.
(10) For Gyro. Verify under Arc++
Using App: com.gamma.bubblelevel, works the same as before.
(11) For Accelerometers. Verify under Arc++
Using App: com.innoventions.sensorkinetics,
small movement's charts looks as expected.
TEST=For generic EC regression test:
On Caroline EC (Without CONFIG_I2C_XFER_LARGE_READ defined).
Details in CL:810332
BUG=b:63993891
Change-Id: I654868945fa535e784800177d54eb2d9803f5249
Signed-off-by: Chun-Ta Lin <itspeter@google.com>
Reviewed-on: https://chromium-review.googlesource.com/788479
Commit-Ready: Chun-ta Lin <itspeter@chromium.org>
Tested-by: Chun-ta Lin <itspeter@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
We use rand to get timestamp counter low word and do random test
(test_dev = rand % i2c_test_dev_used).
But we will get a negative index (test_dev) if low word larger than
0x80000000 and cause the array to access the wrong locations and
trigger an exception.
This change also fix following error:
error: i2c_s_test may be used uninitialized in this function
[-Werror=maybe-uninitialized]
BRANCH=none
BUG=none
TEST="forcetime 0 0x80000000" then "i2ctest", no exception triggered.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Change-Id: Ia2f5a2ff034a6b7b96f7bd4f3b42bf5645a05aed
Reviewed-on: https://chromium-review.googlesource.com/663110
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Virtual battery implements a smart battery interface, but the actual
battery on the system may speak a different protocol. Support such
batteries by removing direct i2c access from the virtual battery driver.
Fetch data from storage when available, and call generic battery
routines when not.
BUG=chromium:717753
BRANCH=None
TEST=Manual on kevin, boot and verify "Unhandled VB reg" prints are not
seen. Verify by-eye that all regs in cros 4.4 kernel sbs-battery.c are
handled (except REG_MANUFACTURER_DATA). Verify that sysfs manufacturer,
model name, time_to_full_avg and time_to_empty_avg values are all sane.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ia8fc0a80ac7576fa8bdcc3b7dac0609d9d754234
Reviewed-on: https://chromium-review.googlesource.com/547004
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Split i2c.c code in two (i2c_slave.c and i2c_master.c). i2c_slave.c is
used when EC has no i2c device connected (i2c master code not needed)
but EC is connected to AP via i2c.
BRANCH=none
BUG=b:37584134
TEST=1. Compile rose board with CONFIG_I2C and CONFIG_CMD_HOSTCMD. Then
make sure EC_CMD_GET_PROTOCOL_INFO works.
2. On Kevin and Elm, cherry-pick to firmware branch respectively,
build and flash ec, i2c function works.
Change-Id: I1f95ad277713c5e30913e0a010ca03dfd9ec248c
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/484999
Commit-Ready: Wei-Ning Huang <wnhuang@chromium.org>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
