If the sn5s330 PPC is being used to detect VBUS presence
(CONFIG_USB_PD_VBUS_DETECT_PPC), then enable interrupts and call
usb_charger_vbus_change when VBUS_GOOD changes.
BUG=b:72007153,b:72007492
BRANCH=none
TEST=Connect 3A and 1A USB-A chargers to each of Grunt's USB-C ports,
check that BC1.2 detection is working:
With 1A:
> chgsup
port=0/1, type=7, cur=500mA, vtg=5000mV, lsm=1
With 3A:
> chgsup
port=0/1, type=7, cur=2400mA, vtg=5000mV, lsm=1
TEST=Boot Grunt to OS, then connect USB2 mouse or USB3 flash drive to each
of Grunt's USB-C ports. Devices do not work due to b:71772180, but gpioget
shows EC is setting USB_C0/1_BC12_VBUS_ON_L correctly.
Change-Id: Iffc352105a321997adb364b9fbb8bafef248c224
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/887938
Reviewed-by: Jett Rink <jettrink@chromium.org>
Boards with a PPC will use the PPC to discharge the VBUS line instead
of the TCPC or GPIO discharge path.
BRANCH=none
BUG=b:72179253
TEST=Fall time after device removal on grunt within spec now
Change-Id: I822923a1cedb32a20efc3610cce4437ade3387f0
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/886563
Reviewed-by: Edward Hill <ecgh@chromium.org>
We don't want the PPC to connect the CC lines from the
TCPC to the USB connector until the TCPC resistors are
set in a valid state (SINK initially).
If we connect the CC lines (happens in the ppc_init) before
setting the resistor values, some TCPC will be toggling the
CC line between Rp/Rd since it doesn't detect a cable yet.
In the dead battery charging case, connecting the toggling
CC lines to the charger can rail the CC lines to 3.3 V signaling
to the charger to disconnect Vbus, thus browning out the board.
BRANCH=none
BUG=b:71865251
TEST=Grunt powers on via usbc p0 with and without USB hub.
Change-Id: I8e78aa2af42075398fab89a2dccef5e7df27b260
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/882305
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
The PPC needs to update its Vbus source current limits whenever our
policy changes on the PD ports. This commit simply adds and API to do
so.
BUG=None
BRANCH=None
TEST=With some extra code to enable 3A out, flash zoombini; Plug in a PD
device to a port, verify that it gets 5V @ 3A. Plug in a second device,
verify that we re-send new source caps of 5V @ 1.5A.
TEST=Repeat above for meowth.
Change-Id: Ifa4bc8b7df87f7730f2bcded842906d43171394b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/818335
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The SN5S330 has support for detecting when Vbus is present on a port.
This commit simply adds an API to query the PPC.
BUG=None
BRANCH=None
TEST=`make -j buildall`.
TEST=Flash a board with the SN5S330, with some extra code, verify that
Vbus can be detected with this API.
Change-Id: I45bf7ff24bcdc447efe12932f51f8094108e29d5
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/791502
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
This commit introduces a driver framework for power path controllers.
It provides some common PPC APIs as well as allowing a board to use
multiple different PPCs drivers/parts. This should make it easier to
add PPC drivers in the future.
BUG=None
BRANCH=None
TEST=`make -j buildall`
TEST=Flash zoombini; verify PPC works as expected.
TEST=Flash meowth; verify PPC works as expected.
Change-Id: Icfb99f384610590b431456cfd28d4aff18442cb2
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/807630
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
