1. The original driver of OPT3001
a. didn't support to process the command of offset.
b. implemented command of range to setter/getter of Range Number Field
of chip.
But reffering to cros_ec_light_prox.c from linux kernel side, these two
commands are actually leveraged for in_illuminance_calib[bias|scale]
and these calibration factors should be applied into raw lux value read
from the chip.
2. Move ALS in Poppy / Soraka boards from ALS_TASK to MOTIONSENSE_TASK.
3. Mofify parameters of ALS in Reef board in order to adapt changes
here.
BUG=b:69236269
BRANCH=none
TEST=Manually test on the DUT.
Change-Id: Ic3b593feb3e4bc6da0bada6b5d614975f0cf2280
Signed-off-by: Marco Chen <marcochen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/774341
Reviewed-by: Shawn N <shawnn@chromium.org>
Adds min_frequency and max_frequency to struct motion_sensor_t.
New attributes min_frequency and max_frequency are now returned in
ectool's MOTIONSENSE_CMD_INFO response.
Incremented ectool's MOTIONSENSE_CMD_INFO version to version 3.
Add constants for MIN_FREQUENCY and MAX_FREQUENCY to each sensor's
header file.
BRANCH=none
BUG=chromium:615059
TEST=build/boot and verify MOTIONSENSE_CMD_INFO response on kevin,
make buildall -j passes.
Change-Id: I66db9715c122ef6bb4665ad5d086a9ecc9c7c93a
Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/482703
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Use the motion sensor to manage ALS as well.
The current interface (via memmap) is preserved, but
we can also access the sensor via cros ec sensor stack and
send the ALS information to ARC++.
BUG=chrome-os-partner:59423
BRANCH=reef
CQ-DEPEND=CL:424217
TEST=Check the sensor is working via ACPI sensor and
cros ec sensor. Check ARC++ sees the sensors.
Change-Id: Iaf608370454ad582691b72b471ea87b511863a78
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/424323
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Added i2ctest console command to test the reliability of the I2C.
By reading/writing to the known registers this tests provides the
number of successful read and writes.
BUG=chrome-os-partner:57487
TEST=Enabled the i2ctest config on Reef and tested the
i2c read/writes.
BRANCH=none
Change-Id: I9e27ff96f2b85422933bc590d112a083990e2dfb
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/290427
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
BUG=none
BRANCH=none
TEST=Added OPT3001 config to test the sensor in Kunimitsu.
Able to read the als data from "als" console command.
Varied the light intensity and the als reading are changing.
Driver fits into the existing ALS framework.
Change-Id: Idb2e6f9f50b6d0d6c8f64c11336efd3f2c76d498
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/286782
Reviewed-by: Shawn N <shawnn@chromium.org>
