Old oak boards that still use these functions have long been
deprecated, let's make the unneeded functions static.
BRANCH=none
BUG=b:35573263
TEST=make buildall -j => makes newsizes: up to 64 bytes saved on
a few boards.
Change-Id: I8f2503ce324e34b87b3bbfa3c509079357880c9e
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/848574
Reviewed-by: Shawn N <shawnn@chromium.org>
When sysjump to another image, if USB switch state and HW switch control
are not sychronized, the switch can be left in open state. This CL
resets USB switch on init to close USB.
BRANCH=oak
BUG=b:36234142
TEST=manual
plug BC1.2 charger, sysjump to another EC image and unplug the chager.
check pi3usb9281 control register(02h) bit2 == 1.
Change-Id: Iaadfaf51064ed1508271e974b9caf88b96bbe008
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/502835
Reviewed-by: Shawn N <shawnn@chromium.org>
The GPIO that turns on Vbus for the BQ24392 is active low. This commit
changes the driver to make it clear that the enable is active low.
Additionally, the 5V rail is turned on prior to performing detection and
will be turned off if the AP is off.
For zoombini, since the chipset task can also control the 5V rail,
CONFIG_POWER_PP5000_CONTROL is enabled to do so in a task-safe way.
BUG=b:65992382, b:65991615
BRANCH=None
TEST=Verify that Vbus is turned on and the BQ24392 can output high on
charge detect pin.
Change-Id: Ib96ef9736ccc7fa285a3642ec6f3824a1df8f931
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/676762
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The decision on whether to ramp (and how high) depends on the quirks of
charger identification, so move the decision out of board, into the
drivers that implement usb_charger.
Also, rename CONFIG_CHARGE_RAMP to CONFIG_CHARGE_RAMP_SW, to better
contrast with the existing CONFIG_CHARGE_RAMP_HW.
BUG=None
TEST=Manual on kevin, verify ramp occurs when port plugged into Z840
workstation.
BRANCH=None
Change-Id: I5b395274133837a18a4f4ac34b59b623287be175
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/702681
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The variable is_high_power was only used if a board was using charge
ramping. However, we can get rid of the variable entirely.
Additionally some of the intermediate gpio_signal variables can be
removed as well.
BUG=none
BRANCH=none
TEST=Build a board that uses the bq24392 but does not charge ramp.
Verify that there are no compliation errors.
Change-Id: I7edaa74f5029c08662d8c4a15c973beae9729fdf
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/601533
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The primary purpose of the Pericom PI3USB9281 is for BC1.2 detection.
Therefore, move the driver to the bc12/ directory.
Additonally, rename the config option to match.
CONFIG_USB_SWITCH_PI3USB9281 => CONFIG_BC12_DETECT_PI3USB9281
BUG=None
BRANCH=None
TEST=`make -j buildall`
Change-Id: I02f17064c0625e62d6779f895e69899c24898f74
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/594710
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The BQ24932 is a dual single-pole single-throw USB 2.0 high-speed
isolation switch with charger detection capabilities. The device's
charger detection circuitry can support USB Battery Charging
Specification version 1.2 (BC1.2), Apple, TomTom, and other non-standard
chargers.
BUG=None
BRANCH=None
TEST=`make -j buildall`
TEST=Enable support for the BQ24392 on a board. Verify that it
complies.
Change-Id: I82f426f1eedabdbb6b951a6ce0252135de3368db
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/592133
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
