If the sn5s330 PPC is being used to detect VBUS presence
(CONFIG_USB_PD_VBUS_DETECT_PPC), then enable interrupts and call
usb_charger_vbus_change when VBUS_GOOD changes.
BUG=b:72007153,b:72007492
BRANCH=none
TEST=Connect 3A and 1A USB-A chargers to each of Grunt's USB-C ports,
check that BC1.2 detection is working:
With 1A:
> chgsup
port=0/1, type=7, cur=500mA, vtg=5000mV, lsm=1
With 3A:
> chgsup
port=0/1, type=7, cur=2400mA, vtg=5000mV, lsm=1
TEST=Boot Grunt to OS, then connect USB2 mouse or USB3 flash drive to each
of Grunt's USB-C ports. Devices do not work due to b:71772180, but gpioget
shows EC is setting USB_C0/1_BC12_VBUS_ON_L correctly.
Change-Id: Iffc352105a321997adb364b9fbb8bafef248c224
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/887938
Reviewed-by: Jett Rink <jettrink@chromium.org>
Boards with a PPC will use the PPC to discharge the VBUS line instead
of the TCPC or GPIO discharge path.
BRANCH=none
BUG=b:72179253
TEST=Fall time after device removal on grunt within spec now
Change-Id: I822923a1cedb32a20efc3610cce4437ade3387f0
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/886563
Reviewed-by: Edward Hill <ecgh@chromium.org>
The PPC needs to update its Vbus source current limits whenever our
policy changes on the PD ports. This commit simply adds and API to do
so.
BUG=None
BRANCH=None
TEST=With some extra code to enable 3A out, flash zoombini; Plug in a PD
device to a port, verify that it gets 5V @ 3A. Plug in a second device,
verify that we re-send new source caps of 5V @ 1.5A.
TEST=Repeat above for meowth.
Change-Id: Ifa4bc8b7df87f7730f2bcded842906d43171394b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/818335
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Right now, the only events that are unmasked by default are overcurrent
conditions on PP1. This commit adds a simple interrupt handler and
introduces a board specific callback when the overcurrent status changes
on a port. This way, a board can take whatever action it desires with
the notification.
BUG=b:69139844
BRANCH=None
TEST=Flash zoombini with SN5S330 stuffed. Verify that board boots okay.
TEST=With some extra code to setup the interrupt handler, attempt to
exceed the current limit set, verify that interrupt handler is called.
Reduce the current pulled to under the current limit, verify that the
condition is no longer present.
CQ-DEPEND=CL:797937
Change-Id: Id3321c5703f9608da895be0ed5841f2fb76e734e
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/797936
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The SN5S330 has support for detecting when Vbus is present on a port.
This commit simply adds an API to query the PPC.
BUG=None
BRANCH=None
TEST=`make -j buildall`.
TEST=Flash a board with the SN5S330, with some extra code, verify that
Vbus can be detected with this API.
Change-Id: I45bf7ff24bcdc447efe12932f51f8094108e29d5
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/791502
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The default sourcing current limit can be set by the following config
option:
CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT
However, the way that this macro was being used was incorrect for the
SN5S330 driver. Since, enum values are not known at compile time, the
check needs to happen during runtime. This commit makes this change.
BUG=None
BRANCH=None
TEST=Enable CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT on a board that uses
the SN5S330, verify that there are no build errors.
Change-Id: I04a1fa1e2e42c2f4ba49f1769857a8796b2f0a6f
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/791501
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
This commit introduces a driver framework for power path controllers.
It provides some common PPC APIs as well as allowing a board to use
multiple different PPCs drivers/parts. This should make it easier to
add PPC drivers in the future.
BUG=None
BRANCH=None
TEST=`make -j buildall`
TEST=Flash zoombini; verify PPC works as expected.
TEST=Flash meowth; verify PPC works as expected.
Change-Id: Icfb99f384610590b431456cfd28d4aff18442cb2
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/807630
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
It will be useful to determine if a FET is enabled or not. For example,
to determine if we are sourcing power to a downstream device. This
commit simply adds an API to check if a FET is enabled or not.
BUG=None
BRANCH=None
TEST=`make -j buildall`
Change-Id: I1f8198342cf225ce9a10d218607bcfbe6aef618c
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/791498
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
When the SN5S330 is powered initially, there will be certain events set
that will assert its interrupt line. As part of the initialization for
this part, we should clear all the pending interrupts and setup the
masks for the events that we care about.
This commit clears all interrupts at init time and masks all interrupts
except for overcurrent condition for PP1.
BUG=b:69139844
BRANCH=None
TEST=Flash zoombini; With nothing plugged in, verify that the interrupt
line is deasserted at boot.
TEST=Repeat the above test with a charger plugged in.
Change-Id: I7acc030184b76d6c38a729cb64658f71e376c819
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/783510
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
This commit adds a basic driver for the TI SN5S330. This driver just
sets up the IC and provides an API to turn on or off the PP2 FET.
BUG=b:67663166, b:67663124
BRANCH=None
TEST=Enable code for zoombini; Flash a board which has the SN5S330
stuffed; Verify that we're able to perform PD negotiation and negotiate
all the way up to 20V.
TEST=Boot only on AC. sysjump to RW, verify that board does not
brownout.
Change-Id: I9c147ee8465eed878843cf902db301d62e8f627e
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/722104
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
