Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If an HPD IRQ event is seen, make note of it and keep the status set
until informing the host.
BUG=chrome-os-partner:55925
BRANCH=None
TEST=Manual on kevin, trigger HPD event, verify that event bit is set in
reply to first host command and not subsequent host commands.
Change-Id: I0900a683dcb344d5d4d03a1fa6e3d8de913597b2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366990
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
For designs where the host SOC is responsible for setting the USB-C SS
mux, the EC must track the desired mux state and inform the host when
the desired state changes. Then, the host must ask the EC for the new
desired state and set the mux accordingly.
BUG=chrome-os-partner:52639
BRANCH=None
TEST=Manual on gru with subsequent commit.
Attach USB dongle in port 1 and DP dongle in port 0, then verify `ectool
usbpdmuxinfo` output:
Port 0: DP
Port 1: USB
Flip DP dongle and verify output changes:
Port 0: DP INV
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6a99ce93a76c3197f9195cfaa25c5217d09aeb75
Reviewed-on: https://chromium-review.googlesource.com/355281
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
This adds a callback for board specific initialization that is called
after the driver init function. This will allow a board to apply
port-specific tuning (such as USB EQ settings) to the mux chip.
BUG=chrome-os-partner:47074
BRANCH=none
TEST=build and boot on chell
Change-Id: Ib162f9a2c5239678c46b80e5517823b336f6b66c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/313746
Reviewed-by: Shawn N <shawnn@chromium.org>
In preparation for adding support for additional USB-C mux chips, add a
new high-level USB-C mux interface usb_mux.c. usb_mux functions are now
called from pd code instead of board-level functions. usb_mux calls down
into a mux chip-specific driver (currently pi3usb30532) or
board-specific drivers which toggle GPIOs (for legacy boards).
BUG=chrome-os-partner:41696
TEST=Manual on Glados in subsequent commit. Verify set() and get()
functions set and return consistent values. Verify that USB SS device
functions when muxes are set to dock or USB. Also, verify that DP
dongle and USB SS device are functional on both PD ports on samus_pd.
BRANCH=None
Change-Id: Ib6477f489310f3be1430585ea09fea26f57e3752
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/281435
Reviewed-by: Alec Berg <alecaberg@chromium.org>
