This patch makes EC enable PD communication if it's running in
manual recovery mode. This is required to show recovery screen
on a type-c monitor.
This patch also makes EC-EFS ignore power availability. It will
make EC verify & jump to RW even if power is sourced by a barrel
jack adapter. This should allow depthcharge to show screens
(e.g. broken, warning) on a type-c monitor.
BUG=b:72387533
BRANCH=none
TEST=On Fizz with type-c monitor, verify
- Recovery screen is displayed in manual recovery mode.
- Critical update screen is displayed in normal mode.
- Warning screen is displayed in developer mode.
Monitors tested: Dingdong, Dell S2718D
Change-Id: Ib53e02d1e5c0f5b2d96d9a02fd33022f92e52b04
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/898346
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This change makes EC run vboot in the HOOK task. The vboot routine
requires battery and charger info. It waits in a deferred call
loop until the charge manager is initialized.
BUG=b:63586051
BRANCH=none
TEST=Verify the following cases:
A. Hardware reboot (type-c/BJ)
1. Unplug AC in S0 then plug in AC: BOOT/BOOT
2. Unplug AC in S5 then plug in AC: S5/S5
3. Unplug AC after A.2 then plug in AC: S5/S5
4. Press PB in S5: BOOT/BOOT
B. Software reboot (type-c/BJ)
1. Run EC reboot command in S0: BOOT/BOOT
2. Run EC reboot command in S5: BOOT/BOOT
3. Run EC reboot ap-off command in S0: S5/S5
4. Run EC reboot ap-off command in S5: S5/S5
5. Run host reboot command: BOOT/BOOT
6. Run host shutdown command: S5/S5
C. Recovery tests
1. Press RB and PB in S0: FAIL(*1)/PASS
2. Press RB and PB in S5: FAIL(*1)/PASS(*2)
3. Unplug AC in S0 then press RB and plug in AC: PASS/PASS
4. Unplug AC in S5 then press RB and plug in AC: PASS(*2)/PASS(*2)
*1: b:63668669
*2: b:63669512. Requires one more PB press.
Change-Id: I28f37fdad7f83d0d44570b9003e8c6a4b83b832f
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/568699
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This patch moves the code which can be shared with other data
verification schemes (e.g. RWSIG) under common/vboot. It also
adds unit tests for it.
BUG=b:38462249
BRANCH=none
TEST=make run-vboot. Verify verification succeeds on Fizz.
Change-Id: Icab4d96dd2c154a12b01c41ebe9b46286b4b590e
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/563463
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This patch adds vboot for EC by EC (vboot EC) for x86 systems.
When ec is transitioning s5->s3, it checks the power supply is
enough to boot AP or not. If not, it runs other checks and may
finally validate and jump to a RW image.
BUG=b:38462249
BRANCH=none
TEST=Boot Fizz on barrel jack and type-c charger.
Change-Id: I5988b0595976370c5303c45541702ae89d86fc97
Reviewed-on: https://chromium-review.googlesource.com/518254
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Superseded by EC software sync (hash-based).
Sig-based vboot was correctly implemented, but ended up being too slow
to be useful given the limited processing power of the EC chips, and
we also couldn't come up with a manageable way to handle A/B
autoupdate of signed EC firmware.
This change and an associated vboot_reference change shrinks the EC
binary by ~2KB.
BUG=chrome-os-partner:11232
TEST=build link,snow; boot link and check that 'hash' command still works.
Change-Id: I3f03ae2d0a4030977826980d6ec5613181e154c2
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/29496
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
BUG=chrome-os-partner:9922
TEST=manual
Press power+refresh+d.
From ec console, 'optget'. No reference to fake dev switch
From host, 'ectool vboot'. Should see either 'fake_dev=0' or no mention of fake dev switch at all.
Change-Id: I66bc5e926d6e639b206563e764bcc730cce9227c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27061
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This adds "ectool vboot", which works like so:
# ./ectool vboot
0x06 image=A fake_dev=1
# ./ectool vboot 0
# ./ectool vboot
0x02 image=A fake_dev=0
# ./ectool vboot ff
# ./ectool vboot
0x06 image=A fake_dev=1
You can set or unset the fake dev-switch, and see which firmware image the
EC is running from.
BUG=chrome-os-partner:8313
TEST=manual
Boot the host, use crossystem to see the devsw_boot state. Change it with
the ectool command, reboot, see that it's changed.
Change-Id: Iaac40267338c6a07bc47b80e925e829bf1e1ae0c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
