Add a new transport for ectool to send host command V3 over the Servo v2
SPI interface using libftdi.
Build this new communication mechanism only for the 'build' architecture
as it has a dependency on libftdi, the new ectool binary is called
ectool_servo.
Fix the 'build' tools build if they don't have a source file matching
their binary name.
The serial number of the servo board can be passed in the 'name'
parameter, e.g. :
sudo ectool_servo --name=905537-00474 version
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=b:70320279
TEST=with ZerbleBarn connected to a servo V2, run:
sudo ectool_servo version
Change-Id: Ia7067d465a42f76695fed5932f32fac9a6d0988e
Reviewed-on: https://chromium-review.googlesource.com/864164
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Based on the passed TOUCHPAD_FW parameter to the make command, the
build system generates hashes for the touchpad FW.
To generate the hashes, gen_touchpad_hash splits the touchpad FW
in blocks of CONFIG_UPDATE_PDU_SIZE, that are hashed individually
(SHA-256), and then stored in the EC image.
This will allow the USB updater code to verify the integrity of
the touchpad firmware being flashed.
When no FW is provided, zeros are output, which do not match
any valid data.
BRANCH=none
BUG=b:63993173
TEST=make TOUCHPAD_FW=SA459C-1211_ForGoogleHammer_3.0.bin \
BOARD=hammer -j
TEST=Using variations of
make TOUCHPAD_FW=SA459C-1211_ForGoogleHammer_3.0.bin \
BOARD=hammer -j
make TOUCHPAD_FW=SA459C-1211_ForGoogleHammer_4.0.bin \
BOARD=hammer -j
make BOARD=hammer -j
Check that TPHASH touchpad_fw_hash.h is only regenerated when
the parameter changes.
Change-Id: Ie347270aa9c00342de13489c9422e45e681b94c2
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/615321
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
export_taskinfo is a utility used by the stack analyzer.
This patch makes sure it will be recompiled when the EC code changed.
BUG=none
BRANCH=none
TEST=make BOARD=eve -j && make BOARD=eve analyzestack
Add a fake task in board/eve/ec.tasklist
make BOARD=eve -j && make BOARD=eve analyzestack
The fake task shows in the report
Change-Id: I57c2700610680975571d254e0059571556f184fe
Signed-off-by: Che-yu Wu <cheyuw@google.com>
Reviewed-on: https://chromium-review.googlesource.com/651449
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add the extra dependencies to "deps-y" and include it in "deps".
BUG=chromium:761922
BRANCH=none
TEST=Add "$(info $(deps))" before "-include $(deps)" in Makefile.rules
make BOARD=eve utils | grep "build/eve/util/usb_pd_policy.o.d"
There is "build/eve/util/usb_pd_policy.o.d"
Change-Id: I77670a8e90a1a913943fcba143402318aaf7d274
Signed-off-by: Che-yu Wu <cheyuw@google.com>
Reviewed-on: https://chromium-review.googlesource.com/649455
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add a shared library to export task information.
Modified the stack analyzer to get information from the shared library.
Show allocated stack sizes of tasks in the stack analyzer.
To get the all task information (including the allocated stack size),
A shared library is added and compiled with the board to export all
configurations of the tasklist.
BUG=chromium:648840
BRANCH=none
TEST=extra/stack_analyzer/stack_analyzer_unittest.py
make BOARD=elm && extra/stack_analyzer/stack_analyzer.py \
--objdump=arm-none-eabi-objdump \
--addr2line=arm-none-eabi-addr2line \
--export_taskinfo=./build/elm/util/export_taskinfo.so \
--section=RW \
./build/elm/RW/ec.RW.elf
make BOARD=${BOARD} SECTION=${SECTION} analyzestack
Change-Id: I72f01424142bb0a99c6776a55735557308e2cab6
Signed-off-by: Che-yu Wu <cheyuw@google.com>
Reviewed-on: https://chromium-review.googlesource.com/611693
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Problem was detected while using ccprintf to debug a data role swap
requests issue. To prevent errors similar to this, surround the API call
as follows:
ifndef VIF_BUILD
ccprints("I won't generate an undefined reference when building genvif");
endif
BUG=b:63664511
BRANCH=None
TEST=`make -j buildall`
Change-Id: Ieab9eaa638320cae67995a67c843d08b54acfbcb
Signed-off-by: Sam Hurst <shurst@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/570820
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Create an app to extract relevant information
from the EC code base that's used to create Vendor
Information Files (VIFs) needed for USB Type-C
compliance testing.
BUG=chromium:701852
BRANCH=none
TEST=make -j buildall
Compared generated VIFs to expected values
Change-Id: I600ca78b9fb5d2de78aa65a58264c6f79b36ea17
Reviewed-on: https://chromium-review.googlesource.com/455280
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
To be able to parse binary panicinfo from feedback reports, we need
a host tool:
- Move panicinfo generic parsing functions to a separate C file
- Create a new host utility to parse panicinfo
BRANCH=none
BUG=chromium:643062
TEST=base64 -d | ec_parse_panicinfo
Change-Id: Idd8560a2894f270d0ab3a9f654c333135759e57f
Reviewed-on: https://chromium-review.googlesource.com/379639
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
ecst is used at build / link time, so it should be compiled for the
build machine architecture, not the architecture of the host board.
BUG=chromium:567232
TEST=Verify 'cros_sdk ... cros_run_unit_tests --board=oak' passes with
CL:319256.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ic7f6aa989d0760eda1fe64221e41d3230c9ab9b9
Reviewed-on: https://chromium-review.googlesource.com/319633
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add ECST tool to modify the header used by npcx booter.
Modified drivers:
1. i2c.c: Modify for i2c_port design.
2. i2c.c: Fixed bugs when mutil-tasks use the same i2c port and pull-up issue.
3. hwtimer.c: Fixed bug whcih event expired time is behide current timer.
4. lpc.c: Add intializing host settings after pltrst is deasserted.
5. uart.c/clock.c/register.h: Fixed bug which cannot enter deep-idle
when gpio is any-edge trigger mode.
6. task.c: Add workaround method for hard fault issue.
7. keyboard_raw.c: Modified for support CONFIG_KEYBOARD_KSO_BASE
8. lpc.c: Modified for support CONFIG_KEYBOARD_IRQ_GPIO
9. lpc.c: fixed obe interrupt bug during 8042 initialization
10.Adjust path of flat files for new Makefile rules
11.Fixed build error on lpc.c without CONFIG_KEYBOARD_IRQ_GPIO
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Icf9494174b245b4026e396be877d578f36b6f6a5
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/284036
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
Allow to negotiate the packet command and responses to
whatever values the EC can support.
Set the buffer size including the necessary V3 header.
If the EC run v3 protocol with large packet support, but the kernel
does not have v3 support (3.10), we can not support sending or
receiving large commands.
Be aware that on 3.10, commands like ectool console will fail if
the EC wants to send command larger than the kernel can handle.
Copied kernel_version_ge from libusb-1.0.19/libusb/os/linux_usbfs.c.
BUG=chrome-os-partner:31989,chrome-os-partner:31660,chromium:454324,chrome-os-partner:39265
BRANCH=none
TEST=Build a special firmware to exchange 300 bytes.
Check ectool console works with the righ size.
Check that ectool is calling uname.
Check on Nyan_big: without change, "ectool version" crashes kernel. With
changes, "ectool version" works.
In conseuqence, it reverts commit be0bd9b835,
"ectool: Do not increase buffer size after probe max size from ec"
Change-Id: I54ffd43488ea81272f30789dc87a261085769fe0
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/274086
Reviewed-by: Shawn N <shawnn@chromium.org>
Rather than hardcode a specific mips toolchain, do a build-time test to
see if the target is x86 based.
BUG=chromium:443783
TEST=link still includes comm-lpc
TEST=arm64 omits comm-lpc
BRANCH=none
Change-Id: I0253df6cbe89bee231ec643dd6bb3498eb040708
Reviewed-on: https://chromium-review.googlesource.com/265793
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Commit-Queue: Mike Frysinger <vapier@chromium.org>
Tested-by: Mike Frysinger <vapier@chromium.org>
The mec1322 LPC / EMI comm driver is no longer functional due to recent
EC changes. Rather than re-implementing a working driver across user
space tools, the plan of action is to use the kernel device driver
(through comm-dev) for all access.
BUG=chrome-os-partner:38103
TEST=Manual on glower with pending kernel cros_ec_lpc changes. Verify
"ectool version" and "ectool gpioget" succeed.
BRANCH=None
Change-Id: I770cb06ca534a7c31794e6b37c226e952361ee32
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/265031
Reviewed-by: Randall Spangler <rspangler@chromium.org>
MIPS host CPU does not access IO registers using a separate address space.
Remove for support of LPC for this host architecture.
Confine x86 function to Intel Architecture only.
BRANCH=none
TEST=Compile: Test on ARM, MIPS and X86: using emerge... ec-utils.
BUG=chromium:443783
Change-Id: I9d4276ec3588037adfcff96e596bbe8be74f22fd
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236687
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
burn_my_ec is an utility that flash an image embedded in its code.
We can not compile it as part of ec-[dev]utils, because we have
devices that firmware should be build as part of chrome-ec package.
Remove burn_my_ec, barely used.
Split the makefile to build just the host utility when requested.
BRANCH=ToT
BUG=chrome-os-partner:32025,chromium:408713
TEST=Check that files are stil built when needed and
not when utils-host is invoked.
Change-Id: I3fabe16067d57c74ae36b05138f4c6fd2483c7c4
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233347
Currently, LPC or I2C are compiled based on the board.h.
This is not really necessary, code can handle both at the same time.
Note that LPC and I2C access mode are backup modes, the main mode is
dev (accessing ECs through /dev/cros_XX).
BRANCH=None
BUG=chromium:408713
TEST=Compile, tested on Ryu and Samus.
Change-Id: I8b4730f0f5708c543dc034165e9b53de0e543860
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227432
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The PD protocol no longer uses a SHA1 RW hash. Instead, it uses the
first 20 bytes of the SHA-256 hash. Update constants and comments
accordingly.
BUG=chrome-os-partner:31361
TEST='make buildall -j'
BRANCH=samus
Change-Id: Ice74b841dbd1d81205c1ef0079a5e18fca2153b6
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222446
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
BUG=none
BRANCH=ToT
TEST=manual
make BOARD=samus
for i in extra/lightbar/programs/[g-z]*.bin; do
./build/samus/util/lbcc -d $i /tmp/x.lbs
./build/samus/util/lbcc /tmp/x.lbs /tmp/x.bin
cmp $i /tmp/x.bin
done
Change-Id: I86c014c425e917ecafadd1c6845fcf2e5b4edbb7
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220244
This adds a new host commmand for sending RW updates to PD devices.
The host command has a variety of sub-commands for performing the
update, including: erase RW, reboot, write new hash, write flash.
To program zinger RW, you should send host commands in this order:
write new hash to all 0's
reboot (zinger boots into RO since RW hash doesn't match)
erase RW
write flash
write new hash to match contents of RW
reboot
This also adds an ectool command to write a new RW. Just pass it
the RW .flat or .bin file.
BUG=chrome-os-partner:31361
BRANCH=none
TEST=ectool --dev=1 --interface=lpc flashpd 0 0 zinger.RW.flat
Change-Id: Ia81615001b83ad7ee69b1af2bf1d7059177cde04
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213239
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We are using EMI module instead of LPC memory transaction. This requires
a different protocol for accessing mapped memory from host. For easier
development, let's add a new comm-mec1322.c until we can switch back to
LPC memory transaction.
BUG=chrome-os-partner:24280
TEST=ectool version
TEST=util/make_all.sh
BRANCH=None
Change-Id: Id8914d0413561991d3e46bef7e3fe76c4f8b83e4
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178251
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Instead of hardcoding the common files for host utils in the generic
rules, let's declare them in the build.mk file using the same system as
the Linux kernel build.
if a binary "foo" declared in "host-util-bin" or "build-util-bin" has a
matching "foo-objs" variable, it will be build from all objects declared
in "foo-objs" else it uses directly "foo.o" (single source file).
This is preparatory to add new "build" tools sharing common sources.
note: the dependencies on the utils are a bit less fine-grained as a
result of this change, but given the low number of tools, that should be
acceptable.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=./util/make_all.sh
Change-Id: Ieffce7ca6f5b685ffb7d1f4626b99aff07b61443
Reviewed-on: https://chromium-review.googlesource.com/176174
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
ectool and burn_my_ec need to use the same lower-level interface to
the EC flash commands, rather than duplicating calling the low-level
flash read/write/erase commands.
This is a precursor to refactoring the low-level commands to support
SPI/STM32L in a follow-up CL.
BUG=chrome-os-partner:20571
BRANCH=none
TEST=in a root shell, burn_my_ec flashes both RO and RW EC code
Change-Id: I4c72690100d86dbff03b7dacc2fb248b571d3820
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60266
ectool.c has gotten monstrously huge. Refactor out some utility functions.
This is precursor work to refactoring out a lower-level flash
read/write interface.
BUG=chrome-os-partner:20571
BRANCH=none
TEST=ectool flashread 0x20000 0x80 /tmp foo -> works
Change-Id: I26dae609a73e54e8adaec56edbdce6a0bb4b8758
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60265
Reviewed-by: Vic Yang <victoryang@chromium.org>
This is preparation for the common userspace EC interface. If/when that
appears, this will be ready.
BUG=chromium:239197
BRANCH=all
TEST=manual
Build, install, run it. Shouldn't be any change.
Change-Id: I9fa78515ec5443ba659f10a66bbaadcb7f4802b0
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/56131
Add a way of easily setting up keyscan tests using a simple text file
format. The steps to run a test are as follows:
- read the test file
- read the key matrix information
- translate the ascii characters from tests into keyscan codes
- send the keyscan codes to the EC
- tell the EC to start the test
- wait for the required time, then collect what input we have received
- check that the input matches the expected input
BUG=chrome-os-partner:12179
BRANCH=none
TEST=manual for now:
On snow:
./ectool keyscan 10000 key_sequence.txt
See that the test passes.
Change-Id: I7de646205803a99443503a1b4bbf32f5fe89c534
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/35119
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This produces a host binary running on the application processor and
which is able to re-flash th EC firmware over the AP-to-EC link (either
LPC or I2C).
The payload (ie the EC firmware) to use is embedded inside the flasher
binary.
This is just aimed at testing and developer upgrade. The auto-update
flow is using flashrom.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=build for link/daisy/snow/bds and tests
On Snow, run burn_my_ec from the serial console and see that the EC was
correctly re-flashed.
Change-Id: I7f90e773678a7ef3d8dc6dbacf54e80f3294607b
Reviewed-on: https://gerrit.chromium.org/gerrit/24236
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Allow to use EC tool on ARM based platforms.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=On Daisy, ectool version
Change-Id: If7f52de827d0bcffb39af0553245cce4e02b9b48
Preparatory work to re-use the tools on ARM boards using I2C
communications.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make BOARD=link && make BOARD=bds && make BOard=DAISY
Change-Id: I31d41f30c3231a4a9349b939bf6bba871ed4c383
BUG=chrome-os-partner:7459
TEST=manual
In the chroot:
cd src/platform/ec
make BOARD=link
The firmware image (build/link/ec.bin) is signed with dev-keys. Reflash the
EC and try it, and it should verify and reboot into RW A.
Additional tests (setting USE_RO_NORMAL, poking random values into VBLOCK_A
or FW_MAIN_A to force RW B to run, etc.) are left as an exercise for the
reader. I've done them and they work, though.
Change-Id: I29a23ea69aef02a11aebd4af3b043f6864723523
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
BUG=chrome-os-partner:7839
TEST=manual
cd src/platform/ec
make BOARD=link
copy ./build/link/util/lbplay to the host and run it as root.
Change-Id: I6a4a842b7500751185c8f4c2744f4389226bae9b
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
When run with BOOT0=1 and BOOT1=0, the STM32L enters a system monitor
which allows flashing over the serial port (USART1 pins PA9 and PA10).
Implement commands to flash and run a program from a linux Host.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=on a serial port connected to Discovery board pins PA9 and PA10,
run manually the various tools commands.
Change-Id: I42f95ed50a56d82d728989149b3e47210af9dc96
This provides a pty for the EC UART channel on the BD-ICDI-B FTDI
daughtercard for EC debugging.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=make && build/bds/util/ec_uartd (with EC attached to FTDI board)
Change-Id: I51fe50d0da6345962affb860b923425197a04fa1
Build is the system doing the build (e.g. 64-bit linux) and host is the
target platform on top of the ec (e.g. 32-bit Chromium OS).
Necessary to get ectool properly compiling for Chromium OS.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=make && file build/bds/util/ectool; ectool should be a 32-bit binary
Change-Id: I50eba4c164ece236646a7c6087b1b86769beeb28
