These commands are used in factory test. If system is locked, GPIO
commands are disabled for security reason.
BUG=chrome-os-partner:11164
TEST= - 'ectool gpioget enable_backlight' gives 1.
- 'ectool gpioset enable_backlight 0' turns off display.
- Lock system. Check these commands return error.
Change-Id: I3ea41285075ebe963ba7d30e4ae183cef9b1c105
Reviewed-on: https://gerrit.chromium.org/gerrit/27019
Commit-Ready: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
This command should only be accessible when flash write protect is
unlocked.
BUG=chrome-os-partner:9716
TEST= - Check we can charge and discharge normally.
- Connect AC and force idle. Check battery current is 0 mA.
Change-Id: I74a318c1f5562d6a23b722736615fd1f883dc35a
Reviewed-on: https://gerrit.chromium.org/gerrit/27259
Commit-Ready: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
This is set when the EC boots and sees the recovery key combo.
This is preferable to the memmap'd keyboard recovery switch, which the
host has no way of clearing. The idea is that the host RO firmware
reads this event and sets the recovery reason.
I will be removing the memmap'd keyboard recovery switch once U-boot
and coreboot check this new event.
BUG=chrome-os-partner:10034
TEST=manual
1. power+esc+refresh; should see this even in EC log
[0.000838 event set 0x00004000]
(time of event may vary)
2. reboot EC; should NOT see the event
Change-Id: Id0672749f63c5022624a72ec91d30dcadfea5ef8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27328
U-boot and ectool need this to see what events have occurred, in a way
which doesn't conflict with ACPI/SCI/SMI.
BUG=chrome-os-partner:11172
TEST=manual
- boot EC
- look at event set / event clear debug output; that's for copy A
- from ec console,
hostevent -> events=0, events-B = 0x2088
hostevent clearb 0x2000 -> events-B = 0x88
Change-Id: If842b157914426df593d82af2bfb08a923caa34b
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27317
Both EC and ectool are still backwards-compatible to the old interface.
BUG=chrome-os-partner:11275
TEST=manual
From U-boot prompt: mkbp hash // test old host talking to new EC
From root shell: ectool echash // test new host talking to new EC
You can also update just the OS and use an old EC, and verify that
'ectool echash' still works, which tests a new host talking to an old
EC.
Change-Id: I2afbb208cb16836f842ba119b74b1ab6a38ce5d5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27313
And retain compatibility for old requests.
BUG=chrome-os-partner:11275
TEST=from u-boot prompt, 'mkbp hash'
from root shell, 'ectool flashread 0 68084 /tmp/foo'
then compare to first 68084 bytes of ec.bin
Change-Id: Id82068773703543febde79fc820af7486502e01f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27226
These commands are only available when system is unlocked.
BUG=chrome-os-partner:9716
TEST=When system is unlocked, check we can read/write I2C bus.
When system is locked, check the commands return error.
Change-Id: I8c4a8a42ab13d62c7e47bf33e2a7abc6f61e43fa
Reviewed-on: https://gerrit.chromium.org/gerrit/27254
Reviewed-by: Rong Chang <rongchang@chromium.org>
Commit-Ready: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Added version mask field to DECLARE_HOST_COMMAND() because it's
convenient to do so when I'm touching all host command
implementations, but all commands simply declare version 0 and nothing
checks it yet. Will add version support in a followup CL.
This change is internal to the EC; it does not change the data sent
over the host interface.
BUG=chrome-os-partner:11275
TEST=manual
ectool version && ectool echash; should get sane data from both
ectool flashread 0x80 0x40 /tmp/foo && od -tx1 /tmp/foo
should match data from offset 0x80 of ec.bin (od -j128 -n64 -tx1 ec.bin)
Change-Id: I5699f72b8d5e1ac23929353c9a34158d76c44206
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27172
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Now that ACPI events are handled directly in the LPC interrupt
handler, we can simplify the host event code.
BUG=chrome-os-partner:11240
TEST=boot system; should boot
close lid; should send SMI and suspend system
Change-Id: I8c73ea31a66e94310e4460a008635a103220413e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27100
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
And only support it for port 62/66.
Also remove 'ectool queryec', because it can't touch port 62/66 once
the kernel/ACPI owns it, and query-event isn't supported on the user
command port.
BUG=chrome-os-partner:11240
TEST=boot system and check EC console output; should see event clears between
host commands 0x23, 0x8e, but no hostcmd 0x84.
[0.396780 LPC RESET# deasserted]
[0.486953 Port 80: 0x29]
[0.487415 hostcmd1 0x23]
[0.764407 Port 80: 0x88]
[0.764579 event clear 0x00000008 -> 00002080]
[0.764928 event clear 0x00000080 -> 00002000]
[0.765224 event clear 0x00002000 -> 00000000]
[0.765578 hostcmd1 0x8e]
[0.765868 hostcmd1 0x06]
Change-Id: I8ed161dbccd396d685ddf6829a27dfef87d919fb
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27095
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
BUG=chrome-os-partner:9922
TEST=manual
Press power+refresh+d.
From ec console, 'optget'. No reference to fake dev switch
From host, 'ectool vboot'. Should see either 'fake_dev=0' or no mention of fake dev switch at all.
Change-Id: I66bc5e926d6e639b206563e764bcc730cce9227c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27061
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This allows the console or AP to keep the EC in its RO code.
Previously, the EC could jump from RO to RW even if the system was
locked in pre-init.
Also, sysjump console command doesn't need to check if system is
disabled before calling system_run_image_copy(), because that function
also checks. This now matches how the host command works.
BUG=chrome-os-partner:11147
TEST=manual
syslock
sysjump A -> works
reboot
syslock
sysjump disable
sysjump A -> fails
Repeat, using 'ectool reboot_ec disable-jump' at root shell instead of
'sysjump disable' at EC console.
Change-Id: I0b168a93e97802ba30e7c225b01d70ea66e8db58
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26898
Also add new 'invalid' host event bit; if the host reads this, it
knows the memory-mapped data for current events is invalid.
BUG=chrome-os-partner:11146
TEST=manual
On host, ectool eventget -> should print events = 0
On EC, hostevent set 0x80000000
On host, ectool eventget -> should print events = invalid
Reboot EC; should see debug output where event mask 0x2000 is set
during the boot process.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I8d3f161eec25db50ac06e3642a1a1fb8edb9590e
Reviewed-on: https://gerrit.chromium.org/gerrit/26876
And fix returning memory-mapped string length on LPC as well.
BUG=chrome-os-partner:11090
TEST=manual
from EC, 'hostevent set 0x40000'
from host, 'ectool eventget' --> should print 0x40000
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I9edbd0a1468b5d4160ce67c471332226e51fa868
Reviewed-on: https://gerrit.chromium.org/gerrit/26719
Reviewed-by: Simon Glass <sjg@chromium.org>
This is now superseded by the hash command, which uses a more robust
SHA-256 check.
BUG=none
TEST=if it compiles it's fine
Change-Id: I5ad9256e7af346464301252d62b47bd37852d24a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26452
In preparation for being able to copy ec_commands.h to u-boot, which
is itself in preparation for u-boot picking it up from /usr/src/ec/
BUG=none
TEST=make link, snow, bds
Change-Id: If256434b6722ff0787ce21a8ed4c7035c28024a8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26451
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
EC computes a SHA-256 hash of its RW code on boot. Also adds host and
console commands to tell the EC to recompute the hash, or hash a
different section of flash memory.
BUG=chrome-os-partner:10777
TEST=manual
1) ectool echash -> should match what the EC precomputed
2a) ectool echash recalc 0 0x10000 5
2b) on EC console, 'hash 0 0x10000 5'
2c) results should agree
3a) on ec console, 'hash 0 0x3e000' then quickly 'hash abort'
3b) ectool echash -> status should be unavailable
4) ectool echash start 0 0x3e000 6 && ectool echash && ectool echash abort && sleep 2 && ectool echash
status should be busy, then unavailable
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I6806d7b4d4dca3a74f476092551b4dba875d558e
Reviewed-on: https://gerrit.chromium.org/gerrit/26023
This forces the fan PWM duty cycle to a fixed percentage (0-100). It's only
used for airflow testing.
BUG=chrome-os-partner:10747
TEST=manual
Using this ectool, try
ectool fanduty 0
ectool pwmgetfanrpm
ectool fanduty 50
ectool pwmgetfanrpm
ectool fanduty 100
ectool pwmgetfanrpm
You should see (and hear) the fan speed up. If you have an EC console, you
can run
faninfo
and it should show that the 'Target:' is unrelated to the 'Actual:' value.
Change-Id: Iac332fb3ba63f96726cf7f64061b3ce22d2e76fd
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/25965
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Also removes unused recovery request, since AP handles that internally now.
BUG=chrome-os-partner:10685
TEST=manual. From root shell,
ectool reboot_ec RO -> EC reboots to RO, AP stays up
ectool reboot_ec A -> EC reboots to A, AP stays up
ectool reboot_ec cold -> EC reboots, AP shuts down
ectool reboot_ec cold at-shutdown -> (EC stores request, but doesn't reboot)
shutdown -P now -> EC reboots when AP shuts down
ectool reboot_ec cold at-shutdown -> (EC stores request, but doesn't reboot)
ectool reboot_ec cancel -> (EC stores cancel-request)
shutdown -P now -> AP shuts down, but EC doesn't reboot
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I51bbf997f6b7f94fe61f06a8a1804c3cc5c319b8
Reviewed-on: https://gerrit.chromium.org/gerrit/25791
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
1) Smaller start delay for commands
2) Reads can use the entire 128 byte parameter space
This improves read speed from 350ms/64kb to 210ms/64kb.
BUG=none
TEST=ectool flashread 81920 81920 then compare with ec.A.bin
Change-Id: I53d460bace5f21db845a3f8ec681507fca0f7b0e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/25562
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
We need to be able to toggle these signals to increase test coverage.
BUG=chrome-os-partner:9967
TEST=Toggle 'ectool wireless' and see GPIO signal changes.
'ectool backlight 0' and see LCD backlight turn off.
Change-Id: Ic96fe26aa82c33b0e51e1f973280a0edc322f158
Reviewed-on: https://gerrit.chromium.org/gerrit/23625
Commit-Ready: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Check if ESC+Power+Refresh is pressed at startup, if the recovery
combination is detected, record it to allow U-Boot to go into recovery.
The status of the keyboard recovery can be read from the response of the
EC_CMD_MKBP_INFO command.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9916
TEST=On Snow, do a recovery reset by pressing ESC+Refresh+Power and see
the trace, try other resets and don't see it.
Change-Id: I0e1a8214781a6e74bd90bf8313887a9dcf4df56d
In order to enable automatic keyboard testing, let's add key press
simulating command to ectool.
BUG=chrome-os-partner:9188
TEST='ectool kbpress 4 6 1' and see 'j' pressed.
'ectool kbpress 4 6 0' and see 'j' released.
Change-Id: I5a445e13aad2bd09aa6e9a1d62995cf34b782aeb
When keyboard backlight is disabled, make 'ectool pwmgetkblight' reports
'disabled'.
BUG=chrome-os-partner:9966
TEST='ectool pwmgetkblight' shows 'Keyboard backlight disabled' when
lid closed.
Change-Id: Ica690159e30431ccb530275fcc2311fb8f54a9aa
The main CPU might need to know the particular hardware version the
system is running on. This information is available to the EC, this
change adds a mechanism for the main CPU to request this information.
The board version is defined as a flat 16 bit number.
BUG=chrome-os-partner:8722
TEST=manual
. this change was tested in concert with the appropriate coreboot
modification, the proto1 board returns board version of 0. The
code was modified manually to return a one off version - and the
coreboot indeed observed board version of 1
Change-Id: If434d33f43783b18cb202ea15819bd5804694b8e
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
This adds "ectool vboot", which works like so:
# ./ectool vboot
0x06 image=A fake_dev=1
# ./ectool vboot 0
# ./ectool vboot
0x02 image=A fake_dev=0
# ./ectool vboot ff
# ./ectool vboot
0x06 image=A fake_dev=1
You can set or unset the fake dev-switch, and see which firmware image the
EC is running from.
BUG=chrome-os-partner:8313
TEST=manual
Boot the host, use crossystem to see the devsw_boot state. Change it with
the ectool command, reboot, see that it's changed.
Change-Id: Iaac40267338c6a07bc47b80e925e829bf1e1ae0c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
In order to perform testing across all future boards and enable easier
debugging, we need a host command to read temperature sensor name and
sensor type.
BUG=chrome-os-patner:9836
TEST='ectool tempsinfo 0' shows sensor name and its type.
Change-Id: I06d9c6b045902394179c35e2ee8bc8dc551e8e98
This also updates the communication protocol between the EC and the AP in a
non backward compatible way.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=on Daisy with updated kernel driver, use the keyboard in ChromeOS
Change-Id: I5a50e9a74b9891153a37ea79318c8a66a1b0c5ca
Preparatory work to use common host command code between ARM and x86.
Just rename constants, do not change the binary API.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=make BOARD=link
Change-Id: I534d427c9b50103273835a6f32a0ddb622c762b3
