Originally, vboot1 code used VbExMalloc() and VbExFree() since it needed
to talk to EFI firmware that didn't have standard malloc() and free().
Now, coreboot and depthcharge implement them as wrappers around those
standard calls. vboot2 code already calls them directly, so let vboot1
code do that too.
BUG=chromium:611535
BRANCH=none
TEST=make runtests; emerge-kevin coreboot depthcharge
Change-Id: I49ad0e32e38d278dc3589bfaf494bcf0e4b0a4bd
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/400905
This flag will be used by the firmware updater to indicate that RO
software sync should be attempted.
BUG=chrome-os-partner:48703
BRANCH=None
TEST=make runtests
Change-Id: I42090ac47da45c724e66334648ab447ad3c21178
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/320621
Reviewed-by: Randall Spangler <rspangler@chromium.org>
In developer mode, this option will make the system try to boot into
a legacy OS first after the 30 second timeout. This removes the need to
press a key during boot to try legacy mode and the need to remove the
write protect screw to boot legacy as default.
BUG=chromium:310697
BRANCH=none
TEST=make runtests
Change-Id: I9a9f64c14ad015e21d08eec36e8fc187189cd2f2
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/304077
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When a TPM goes from the disabled state to the enabled state, it must
reboot after being enabled, before it can be initialized. In vboot1,
TLCL was part of vboot and this was handled internally. In vboot2, the
caller must set a context flag, so that vboot can decide whether to
allow the reboot, or whether to go directly to recovery mode. This
check is necessary to handle the following cases:
1) The device is booting normally, but the TPM needs a reboot. This
should simply reboot, without going to recovery mode.
2) The device is booting in recovery mode, but the TPM needs a reboot.
If this is the first time it asked us, allow the reboot.
3) The TPM asked for a reboot last time, so we did. And it's still
asking. Don't reboot, because that runs the risk that whatever is wrong
won't be fixed next boot either, and we'll get stuck in a reboot loop
that will prevent recovery. Boot into recovery mode.
Add a new NvStorage bit to track whether the TPM requested a reboot on
the previous boot. That's better than what we did in vboot1, where we
used a special recovery request. Vboot1 couldn't track getting stuck in
a reboot loop in normal mode, only in recovery mode. The new code can
catch both.
BUG=chrome-os-partner:45462
BRANCH=ryu
TEST=make runtests
Change-Id: I2ee54af107275ccf64a6cb41132b7a0fc02bb983
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300572
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
1. Change offset 8 to hold all misc settings (fastboot, boot_on_ac
detect) instead of only fastboot settings.
2. Add flag to hold state of boot_on_ac_detect (If set to 1, AP should
start booting as soon as AC is connected in off-state).
BUG=chrome-os-partner:41680
BRANCH=None
TEST=Compiles successfully. make runtests successful.
Change-Id: I64b3fc69bd52cbcaf5899c953ccafa2e81b5b8a5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/289900
Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Add a new flag to nvstorage for controlling fastboot capabilities
offered in firmware in dev-mode. By default, value of this flag would
be ignored in normal mode. Thus, when fastboot-based recovery is
entered from normal mode, only limited capability would be available
in firmware.
After switching to dev-mode, this flag can be set automatically by
user script after performing the wipe or it can be set manually using
crossystem. When fastboot-based recovery is entered from dev mode and
this flag is set, it will provide full fastboot capability in the
firmware.
BUG=chrome-os-partner:40196
BRANCH=None
TEST=Compiles successfully for smaug. make runalltests successful.
Change-Id: I761a9ab304dd90f0b73081acc9ce1f8d9052325f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/271369
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
This gives recovery mode information on two boots back instead of one,
which may be handy for debugging.
It also allows determining whether a failure of the current boot
should try the other slot or go to recovery, using only information
stored in NV storage.
Added crossystem support for printing the fields, and unit tests.
BUG=chrome-os-partner:32585
BRANCH=none
TEST=make runtests; VBOOT2=1 make runtests
Change-Id: Ia9f4186210d30217b902db7c513ae4ab8851f8f4
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221230
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Add checks that the vboot library does not leak memory. This works by
tracking VbExMalloc() calls and making sure that they have an associated
VbExFree().
Adjust host_signature to use VbExFree() instead of free(), so that this
scheme works correctly for existing code.
BUG=chrome-os-partner:21115
BRANCH=pit
TEST=FEATURES=test emerge-peach_pit vboot_reference
Change-Id: I6ccccfbcc162fc43fb75862cd0eddad78ce8b18a
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/66175
These were macros that were never used, or that were only set to one thing and
could be substituted up front.
I left in code guarded by the HAVE_ENDIAN_H and HAVE_LITTLE_ENDIAN macros even
though those are never defined because they guard a reportedly significantly
faster implementation of some functionality, at least according to a comment
in the source. It would be a good idea to enable that code path and see if it
really does make a big difference before removing it entirely.
BUG=None
TEST=Built for Link, Daisy, and the host with FEATURES=test. Built depthcharge
for Link and booted in normal mode.
BRANCH=None
Change-Id: I934a4dd0da169ac018ba07350d56924ab88b1acc
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/45687
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
This option is disabled per default and can be enabled with
crossystem dev_boot_legacy=1
or by setting the GBB flag
GBB_FLAG_FORCE_DEV_BOOT_LEGACY 0x00000080
BUG=chrome-os-partner:6108
TEST=crossystem dev_boot_legacy=1
boot to dev mode screen, press CTRL-L, see SeaBIOS start
(other CLs needed)
BRANCH=link
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: I593d2be7cff5ca07b8d08012c4514a172bd75a38
Reviewed-on: https://gerrit.chromium.org/gerrit/31265
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
This adds two new flags to crossystem:
clear_tpm_owner_request
clear_tpm_owner_done
The first one requests that the firmware clear the TPM owner on the
next boot. When the firmware does this, it will set
clear_tpm_owner_request=0, and set clear_tpm_owner_done=1. The OS can
use the done-flag as a hint that trusted things guarded by the TPM are
no longer trustable.
BUG=chromium-os:31974
TEST=manual
crossystem
// both flags initially 0
crossystem clear_tpm_owner_request=1
crossystem clear_tpm_owner_done=1
// request=1, done=0; done can be cleared but not set by crossystem
reboot
tpmc getownership
// owned=no
crossystem
// request=0, done=1
crossystem clear_tpm_owner_done=0
crossystem
// both flags 0 again
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I49f83f3c39c3efc3945116c51a241d255c2e42cd
Reviewed-on: https://gerrit.chromium.org/gerrit/25646
Confirmed via codesearch that these fields are not used outside of
vboot_reference itself, and the only use inside vboot_reference is one
test which checked that the test error generation itself worked.
BUG=chromium-os:31668
TEST=make && make runtests
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Ic393e126ca2853f7aaff19ffd6fcdbdb1c47689f
Reviewed-on: https://gerrit.chromium.org/gerrit/24895
Reviewed-by: Simon Glass <sjg@chromium.org>
When you enter dev-mode,
Pressing Ctrl-U to boot from USB is DISABLED.
Booting any self-signed kernel from the SSD is ENABLED.
This replaces the "crossystem dev_boot_custom" argument with
"crossystem dev_boot_signed_only", which has the opposite polarity.
So if you want to dev-mode to only boot official kernels, you have to
explictly set it that way. If you leave dev-mode and then come back,
it will go back to the conditions shown above.
BUG=chrome-os-partner:5954
TEST=manual
Just run the factory flow. It was broken; this should fix it (except for any
workarounds that were added while it was broken; those may need to be
reverted).
Change-Id: I13e0edbc0e77c5d6ea609dabf771085006cd1805
Reviewed-on: https://gerrit.chromium.org/gerrit/11853
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Although we're now using a single unified BIOS, it is pretty nice to be able
to get a shell in developer mode while still using verified boot for the
kernel and filesystem. Alex & ZGB implemented this by requiring the dev-mode
user to install a special dev-mode BIOS. We don't do that, but we DO require
setting a special flag with "crossystem" to accomplish the same thing.
In order to allow booting a self-signed kernel, you must boot in developer
mode, open a shell, and run this:
crossystem dev_boot_custom=1
Special note to internal developers: If you're in the habit (as I am) of
booting directly from a USB stick in dev-mode, you'll have to run this:
crossystem dev_boot_custom=1 dev_boot_usb=1
Just using dev_boot_usb=1 is no longer enough, because the USB kernel is
signed using the recovery key and by pressing Ctrl-U, we validate it with
the kernel data key. That worked before this change because any self-signed
kernel was fine, and that's how the USB key was treated. Now it actually
requires a verified signature until you enable dev_boot_custom=1 also.
BUG=chrome-os-partner:5954
TEST=manual
Boot once in normal mode, which clears the special flags. Then switch to
developer mode. You should be able to boot and get a root shell.
Run
crossystem dev_boot_usb=1
Obtain a USB recovery image that's keyed differently. For example, if you're
testing with dev-keys, use a PVT-signed image or vice-versa.
Reboot into dev-mode with the USB recovery stick inserted. At the dev-mode
screen, press Ctrl-U. You should hear a single beep, but it should not boot.
Press Ctrl-D to boot from the hard drive, log in to a shell and run
crossystem dev_boot_custom=1
Repeat the previous test. This time when you press Ctrl-U, it should boot
the recovery image. Turn the system off before it does anything.
That's it.
Change-Id: I1811ee9a188974b3f94c83c52b00b60028b86c69
Reviewed-on: https://gerrit.chromium.org/gerrit/11442
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chromium-os:17433
TEST=make && make runtests. Additional manual tests:
0. Insert a valid dev-signed USB key.
1. Boot with dev switch off.
`crossystem dev_boot_usb` should print 0.
2. Flip dev switch on.
`crossystem dev_boot_usb` should print 0.
Ctrl+U at dev screen should beep, but not boot USB.
3. Type `crossystem dev_boot_usb=1`. Should succeed.
`crossystem dev_boot_usb` should print 1.
4. Reboot system.
At the dev mode warning, press Ctrl+U
System should boot from USB key
`crossystem dev_boot_usb` should print 0.
5. Flip dev switch off.
`crossystem dev_boot_usb` should print 0.
6. Flip dev switch on.
`crossystem dev_boot_usb` should print 0.
Note that this does not apply to Cr-48, Alex, or ZGB.
Change-Id: Idf85fdd642f38f531c89e5fa5b1679e84936d4da
Reviewed-on: http://gerrit.chromium.org/gerrit/3875
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I5ed3509a9d4e578cd2e98f493dab59bc2fbd5827
R=dlaurie@chromium.org
BUG=chrome-os-partner:2748
TEST=manual
crossystem fwb_tries=3
(reboot)
crossystem tried_fwb
(should print 1)
crossystem fwb_tries=0
(reboot)
crossystem tried_fwb
(should print 0)
In dev mode...
Boot a kernel signed with the same key as in the firmware
crossystem kernkey_vfy
(should print sig)
Boot a kernel signed with a different key than the firmware
crossystem kernkey_vfy
(should print hash)
Review URL: http://codereview.chromium.org/6711045
1) Did firmware attempt RW slot B before slot A?
2) Did firmware check the kernel keyblock signature, or just its hash?
Added crossystem support as well.
BUG=chrome-os-partner:1657
TEST=make && make runtests
Review URL: http://codereview.chromium.org/6597011
Change-Id: I0d743ae87cedd938ba988170793717d3fdbd8ce9
