ROLLBACK region will be used to store rollback information, and
can be protected independently of RW (it can only be protected when
RO is protected, though).
This is only supported on stm32f0 currently.
BRANCH=none
BUG=chrome-os-partner:61671
TEST=on hammer (stm32f072)
flashinfo => RO+RW not protected
flashwp true; reboot => only RO protected
flashwp all; reboot => RO+RW+RB protected
flashwp noall; reboot => only RO protected
flashwp rw; reboot => only RO+RW protected
flashwp rb; reboot => RO+RW+RB protected
flashwp norb; reboot => RO+RW protected
flashwp all; reboot => RO+RW+RB protected
flashwp norw; reboot => RO+RB protected
TEST=on reef, rb/norb commands not available
Change-Id: I45ffc66d91cf3699ecff025e5114c59a73dc8274
Reviewed-on: https://chromium-review.googlesource.com/430519
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The idea of this flag is to be able to protect/unprotect only the
RW portion of the flash. In the (usual) case where ALL=RO+RW, with
no other region, this makes no difference compared to the existing
EC_FLASH_PROTECT_ALL_* flag, and this flag may not be supported.
This is necessary for futher work, where a ROLLBACK region is added,
so that RW/ROLLBACK can be protected/unprotected individually.
Only support for stm32f0 is added, as this is the target for hammer.
BRANCH=none
BUG=chrome-os-partner:61671
TEST=build and flash hammer (stm32f072)
flashinfo => RO+RW not protected
flashwp true; reboot => only RO protected
flashwp all; reboot => RO+RW protected
flashwp noall; reboot => only RO protected
flashwp rw/norw not available
TEST=enable CONFIG_FLASH_PROTECT_RW
build and flash hammer (stm32f072)
flashinfo => RO+RW not protected
flashwp true; reboot => only RO protected
flashwp all; reboot => RO+RW protected
flashwp noall; reboot => only RO protected
flashwp rw; reboot => RO+RW protected
flashwp norw; reboot => only RO protected
TEST=build and flash reef (npcx)
flashinfo => RO+RW not protected
flashwp true => RO protected
flashwp all; flashinfo => all_now displayed
reboot => RO protected
flashwp rw/norw not available
Change-Id: Ica6f499cf2e8a9345b08ef52c915655a983ffe3c
Reviewed-on: https://chromium-review.googlesource.com/442265
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Use the motion sensor to manage ALS as well.
The current interface (via memmap) is preserved, but
we can also access the sensor via cros ec sensor stack and
send the ALS information to ARC++.
BUG=chrome-os-partner:59423
BRANCH=reef
CQ-DEPEND=CL:424217
TEST=Check the sensor is working via ACPI sensor and
cros ec sensor. Check ARC++ sees the sensors.
Change-Id: Iaf608370454ad582691b72b471ea87b511863a78
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/424323
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
This change adds an option to pdchipinfo command to force ec to get
the version from the chip instead of the cache (if it's available).
This option will be used after firmware update, which makes the cache
value stale.
BUG=chrome-os-partner:62383
BRANCH=none
TEST=Run ectool as follows:
localhost ~ # /tmp/ectool pdchipinfo 0 on
vendor_id: 0xaaaa
product_id: 0x3429
device_id: 0xad
fw_version: 0x15
localhost ~ # /tmp/ectool pdchipinfo 1 on
EC result 2 (ERROR)
Change-Id: Icefe96d7fc1208b991a4caa13aaf4f04052edba7
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/441271
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The firmware version formats may vary chip to chip. fw_version field is
changed to a union of a 8 byte string and an 64-bit integer.
BUG=chrome-os-partner:62383
BRANCH=none
TEST=ectool pdchipinfo 0/1 on Electro
Change-Id: Id51e66c44338a09ed897ee61f54cd6a394400e63
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/441270
This patch adds a host command to get PD chip info.
For PS8751, tcpci_get_chip_info will fail if the chip is in
low power mode. It can be woken up by reading a random register
first then wait for 10ms.
This code doesn't have the wake-up read to avoid 10ms delay.
Instead, we call this function immediately after the chip is
initialized because it'll gurantee the chip is awake.
Once it's called, the chip info will be stored in cache, which
can be accessed by tcpc_get_chip_info without worrying about
chip states.
localhost ~ # ectool pdchipinfo 0
vendor_id: 0xaaaa
product_id: 0x3429
device_id: 0xad
fw_version: 0x15
localhost ~ # ectool pdchipinfo 1
vendor_id: 0x1da0
product_id: 0x8751
device_id: 0x1
fw_version: 0x37
BUG=chrome-os-partner:62383
BRANCH=none
TEST=ectool pdchipinfo 0/1. make buildall
Change-Id: I3f1667d00ce1826936d90882ada1df6ed6b0ea37
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/433166
This commit adds a "spoof" mode feature to the motionsense stack. It
allows the user to arbitrarily set the outputs of the sensor in order to
"spoof" the readings of the sensor. This can be useful in emulating
tablet mode or device rotations. A command is available from the EC
console named `accelspoof` and there is a corresponding motionsense
command in ectool called `spoof`.
The usage is as follows:
- EC console
> accelspoof [id] [on/off] [X Y Z]
- ectool
# ectool motionsense spoof -- [id] [0/1] [X Y Z]
If on or off(or 0/1) is not specified, the current spoof mode status of
the sensor is returned. If on is specified, but no components are
provided, the sensor will lock the current values and provide those as
the spoofed values. If the components are provided, those will be used
as the spoofed values.
BUG=chromium:675263
BRANCH=cyan,glados,gru,oak
TEST=Flash a DUT with accels. From AP console, run `ectool motionsense
lid_angle` in a loop, use 'accelspoof' EC console command to set spoofed
values. Verify that the angle is fixed regardless of the actual angle
of the DUT.
TEST=Flash a DUT with accels. From AP console, use `ectool motionsense
spoof` to spoof values and verify that `ectool motionsense` reflects the
spoofed values. Test with both provided component values and no
component values.
Change-Id: Ie30688d22f38054e7243b1af493a3092b2cdfb72
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/421280
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
BRANCH=none
util/ectool.c:1158 merror: taking address of packed member 'size' of class
or structure 'ec_params_usb_pd_fw_update' may result in an unaligned
pointer value [-Werror,-Waddress-of-packed-member]
For this case, the pointer is always aligned but clang complains.
Workaround using double pointer casts to char and uint.
uint32_t *data = &(p->size) + 1;
BUG=chromium:665240
TEST=Builds now
Change-Id: Ibccf0f6e409b9724fc9e5acf28dde570e9d341e3
Reviewed-on: https://chromium-review.googlesource.com/411384
Commit-Ready: Manoj Gupta <manojgupta@chromium.org>
Tested-by: Manoj Gupta <manojgupta@chromium.org>
Reviewed-by: Yunlian Jiang <yunlian@chromium.org>
Match ec_commands.h, adding new type and sensors.
BUG=none
BRANCH=reef
TEST=Check on Reef that barometer sensor info is displayed properly.
Change-Id: I257f5161e5f57be562a2b3a29442b49f47f3fc89
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/394749
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Due to an error in ms_command_sizes, fifo_info command
would fail when lost vectors are present:
packet too long (16 bytes, expected 10)
Reorder ms_command_sizes commands properly.
Get the number of sensors present before printing the number of lost
vectors per sensor.
BUG=none
BRANCH=none
TEST=On cave (with broken MKBP support), check fifo_info
is returning the lost vectors count.
Change-Id: Ic745eb762563705372d8a670ce34eab15e188bf9
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/391887
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Previously, there was no way to identify which flash chip was used by
the EC, for ECs using an external SPI flash. Now, 'ectool flashinfo'
will print more information about the SPI flash chip in these cases.
BUG=chrome-os-partner:56765
BRANCH=any EC with MEC1322 or NPCX still going through factory
TEST=define CONFIG_HOSTCMD_FLASH_SPI_INFO, then
'ectool flashspiinfo' on samus indicates no SPI flash info,
and prints additional info on chell and kevin. Without
the config defined, all platforms report no spi flash info.
CQ-DEPEND=CL:386368
Change-Id: I3c162f7ad12ed4b30ab951c03f24476683382114
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/385702
Reviewed-by: Shawn N <shawnn@chromium.org>
To be able to parse binary panicinfo from feedback reports, we need
a host tool:
- Move panicinfo generic parsing functions to a separate C file
- Create a new host utility to parse panicinfo
BRANCH=none
BUG=chromium:643062
TEST=base64 -d | ec_parse_panicinfo
Change-Id: Idd8560a2894f270d0ab3a9f654c333135759e57f
Reviewed-on: https://chromium-review.googlesource.com/379639
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Record what current limit we set when we act as a source
and when we are changing it.
The change should be backward-compatible as older EC will return 0 in
`current_max` when their role is PD_ROLE_SOURCE while newer firmware
will set the actual limit.
BRANCH=none
BUG=chrome-os-partner:56110
TEST=manual: on Kevin, plug and unplug various devices on the 2
ports, and dump the values with 'ectool usbpdpower'.
Change-Id: I8e78663f3196b1b81c2235ed8642da0638bed649
Reviewed-on: https://chromium-review.googlesource.com/375918
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Allow the host to self-report its sleep state through
EC_CMD_HOST_SLEEP_EVENT, which will typically be sent with SUSPEND
param when the host begins its sleep process. While the host has
self-reported that it is in SUSPEND, don't assert the interrupt
line, except for designated wake events.
BUG=chrome-os-partner:56156
BRANCH=None
TEST=On kevin, run 'ectool hostsleepstate suspend', verify that
interrupt assertion is skipped for battery host event. Run 'ectool
hostsleepstate resume' and verify interrupt is again asserted by the
battery host event.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I74288465587ccf7185cec717f7c1810602361b8c
Reviewed-on: https://chromium-review.googlesource.com/368391
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
If an HPD IRQ event is seen, make note of it and keep the status set
until informing the host.
BUG=chrome-os-partner:55925
BRANCH=None
TEST=Manual on kevin, trigger HPD event, verify that event bit is set in
reply to first host command and not subsequent host commands.
Change-Id: I0900a683dcb344d5d4d03a1fa6e3d8de913597b2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366990
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
If the EC has CONFIG_HOSTCMD_RTC set to 'y', then export this via the
features host command. The kernel can then use this feature to expose
an RTC device under /dev/rtc*.
Signed-off-by: Stephen Barber <smbarber@chromium.org>
BRANCH=none
BUG=chrome-os-partner:54639
TEST=`ectool inventory` shows RTC on kevin
Change-Id: I644c8e61c4d9f691cc6ca94ef60bee4384c21660
Reviewed-on: https://chromium-review.googlesource.com/359414
Commit-Ready: Stephen Barber <smbarber@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Currently, it is assumed the host will sooner or later retrieve the
events from the sensor ring: It is only used by Android and the sensor
HAL is enabling the ring buffer at boot.
But if nobody processes the ring, and the ring is almost full, the EC will
generate interrupt for every new events.
This can happen with ARC, where events generated for ChromeOS
will be in the ring but nobody will process them until Android is
started.
Add a command to allow sending ring MKBP events. It will be used when
the IIO ring buffer is enabled / disabled.
It also can be used for preventing raising interrupt when the device is
about to go to sleep.
BRANCH=ryu,cyan
BUG=b:25425420,b:27849483
TEST=Check with fiforead that no events are queued when IIO ring
buffer is disabled.
Check with ectool and androsensor that interrupt generation stops.
Change-Id: Ibc85eed2e0eae3a9ec07d191e692118bc2fd0dab
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356689
For designs where the host SOC is responsible for setting the USB-C SS
mux, the EC must track the desired mux state and inform the host when
the desired state changes. Then, the host must ask the EC for the new
desired state and set the mux accordingly.
BUG=chrome-os-partner:52639
BRANCH=None
TEST=Manual on gru with subsequent commit.
Attach USB dongle in port 1 and DP dongle in port 0, then verify `ectool
usbpdmuxinfo` output:
Port 0: DP
Port 1: USB
Flip DP dongle and verify output changes:
Port 0: DP INV
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6a99ce93a76c3197f9195cfaa25c5217d09aeb75
Reviewed-on: https://chromium-review.googlesource.com/355281
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Adding ability to get # seconds before rtc alarm
goes off.
BUG=chrome-os-partner:52218
BRANCH=None
TEST=ectool rtcgetalarm w/o setting returns
Alarm not set.
ectool rtcsetalarm 30; ectool rtcgetalarm
to make sure counting down to 0. After alarm
goes off, rtcgetalarm should return alarm not
set again.
rtcsetalarm 30; rtcgetalarm to check alarm is set.
rtcsetalarm 0; should disable alarm. Use
rtcgetalarm to ensure that alarm is disabled.
Change-Id: I176b12fe2dda08eedd23ea33dc64785f09f1d9ae
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/353331
Reviewed-by: Shawn N <shawnn@chromium.org>
This commands makes it possible to control the PD chip (or
the interaction between EC and PD), from the AP.
- PD_SUSPEND: Suspends the PD chip: EC needs to stop talking
to PD chip. Useful at beginning of PD FW update.
- PD_RESUME: Resumes the PD chip: EC can start talking to PD
chip again. Useful at end of PD FW update.
- PD_RESET: Resets the PD chip (called at the end of the update).
- PD_CONTROL_DISABLE: Prevents further calls to this command
(for security reason, we do not want the AP to be able to
call the other subcommands after the update has been performed).
BRANCH=none
BUG=chrome-os-partner:52433
TEST=ectool pdcontrol {suspend,resume,reset,disable}
Change-Id: I7a955dd27b65086c21d195a6504aa7392eb0406d
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/342584
Reviewed-by: Randall Spangler <rspangler@google.com>
Only way to set alarm previously was through
rtcalarm command on EC console. Implemented
interface through ectool so that the AP can set
it as well.
BUG=chrome-os-partner:52218
BRANCH=None
TEST=from AP console, run ectool rtcalarm <sec>
Should see [event set 0x02000000] from EC
console in approximately <sec> seconds.
Change-Id: I3202b826cb994dbca456b8b9c22bbca4dbe2766a
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/347493
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This allows the AP to protect a I2C passthru bus. A board-specific
function then defines what I2C commands are allowed, so that we
can white/black list some addresses (e.g. I2C address allowing
PD chip FW updating).
BRANCH=none
BUG=chrome-os-partner:52431
TEST=Book elm-rev1
Change-Id: Ib106924418b16388ea8ea53c7b6bda6ef92e1d09
Signed-off-by: Nicolas Boichat <drinkcat@google.com>
Reviewed-on: https://chromium-review.googlesource.com/345761
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Randall Spangler <rspangler@google.com>
Add generic PWM host commands for setting + getting duty cycle. PWMs can
be controlled through index (board-specific meaning) or by type
(currently KB backlight and display backlight are supported, more can be
added as needed).
BUG=chrome-os-partner:52002
BRANCH=None
TEST=Manual on chell.
`ectool pwmsetduty kb 100` - Verify KB backlight goes to 100%
`ectool pwmgetduty kb` - Prints 100
`ectool pwmgetduty 0` - Prints 100
`ectool pwmsetduty 0 0` - Verify KB backlight goes to 0%
`ectool pwmgetduty kb` - Prints 0
`ectool pwmgetduty disp` - Error res 3 (unsupported PWM type)
`ectool pwmsetduty 1` - Error res 3 (non-existent PWM index)
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I607c92a291e6c2e3af8238eaf22ad2bb81ffc805
Reviewed-on: https://chromium-review.googlesource.com/344012
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
This is keyboard test mechanism request for "multiple key press test",
we can thru the testing to scan out kso ksi pins shortting or keyboard has
multiple key pressing, below was the testing steps:
1. Turn off internal keyboard scan function.
2. Set all scan & sense pins to input and internal push up.
3. Set start one pin to output low.
4. check other pins status if any sense low level.
5. repeat step 3~4 for all keyboard KSO/KSI pins.
6. Turn on internal keyboard scan function.
BUG=chrome-os-partner:49235
BRANCH=ToT
TEST=manual
Short any KSO or KSI pins and excute "ectool kbfactorytest", it shows failed.
if no pins short together, it shows passed.
Change-Id: Id2c4310d45e892aebc6d2c0795db22eba5a30641
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/332322
Reviewed-by: Shawn N <shawnn@chromium.org>
`tempsinfo all` will probe all 24 sensor IDs, which will produce stderr
output due to host command failure if a given sensor does not exist.
Therefore, check memmap data for presence before probing a given ID.
BUG=chrome-os-partner:51026
BRANCH=None
TEST=Manual on Sentry. Verify "ectool tempsinfo all" dumps info on 4
temperature sensors and prints nothing to stderr.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I14d65c1ad03eafafc21db41781c434b3ed74cb7e
Reviewed-on: https://chromium-review.googlesource.com/333779
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
led_color_names[] should have EC_LED_COLOR_COUNT numbers of data.
A missing data cause strcasecmp() compare argv[] with NULL in
find_led_color_by_name(), that results in Bundle Image test error
BUG=chrome-os-partner:50612
BRANCH=lars
TEST=`make -j buildall`, `ectool led power blue=255` with homemade ectool.
Signed-off-by: Ryan Zhang <Ryan.Zhang@quantatw.com>
Change-Id: I2132775f9d4a074517f9a98b81919dd77bc86102
Reviewed-on: https://chromium-review.googlesource.com/330075
Commit-Ready: David Wu <david_wu@quantatw.com>
Tested-by: Ryan Zhang <Ryan.Zhang@quantatw.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
- ec_response_thermal_get_threshold.value is unsigned, so it can not be
less than zero.
- make power_button_wait_for_release() take a signed int, to match its
existing usage.
BUG=None
TEST=`make buildall -j`
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ie5748df3d9904d1e417adc38fee18f8cb3ce9750
Reviewed-on: https://chromium-review.googlesource.com/325840
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added new host command to support returning lid angle.
New output from ectool:
System with lid angle support:
------------------------------------------
localhost ~ # ectool motionsense lid_angle
Lid angle: 72
System without lid angle support:
------------------------------------------
localhost ~ # ectool motionsense lid_angle
EC result 3 (INVALID_PARAM)
BUG=none
BRANCH=none
TEST=run "ectool motionsense lid_angle"
verify the value matches the physical lid angle position
Change-Id: I4179172c778f643640561e819216f7adfee679d2
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/313345
Reviewed-by: Shawn N <shawnn@chromium.org>
Add support for two new configs to specify critical energy battery
percentage and critical external charger power. When we are under both
thresholds, set the LIMIT_POWER charger parameter to inform the AP that it
should conserve power to avoid brownout, and consider jumping to EC RW
to negotiate PD.
In addition, modify the existing CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON
to allow power-up regardless of power level if a 15W+ charger is
attached, since there is a reasonable chance it may speak PD and provide
sufficient power to boot the AP.
BUG=chromium:537269
TEST=Manual on Glados. Set CHG_MW thresh to 20000, BAT_PCT to 50. Verify
that LIMIT_POWER charger param is set until Zinger negotiates to 20V. Also
veify that system can boot with Donette.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ic963c82fea4ad10e8a5d7e476c5ce3e5ae525dad
Reviewed-on: https://chromium-review.googlesource.com/306774
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This commit adds the "hibdelay" command which will set the time before
the EC hibernates.
BUG=chrome-os-partner:45608
BUG=chrome-os-partner:44831
BRANCH=None
TEST=Build and flash samus EC with hibernation delay host command
added. Use ectool to set the hibernation delay and verify that the
hibernation delay was changed.
CQ-DEPEND=302197
Change-Id: I91141ee48a648c1052f0a3930a810ea4f551e0a4
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/302198
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Allow the host to enable/disable double tap.
Send event when double tap is present.
Also fix a bug when scanning for gestures.
BRANCH=smaug
BUG=chrome-os-partner:44754
TEST=compile. Check on Ryu.
Change-Id: I50d008cd3823072ab1c1e2d21f1276cd2185d797
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/298683
Add more flags to EC_CMD_USB_PD_CONTROL including whether
the port partner is PD capable, and if the port partner has
any of the following flags set in its capabilities: dual-role
power, dual-role data, USB comms capable, and externally
powered.
BUG=none
BRANCH=smaug
TEST=tested on samus using 'ectool --dev=1 usbpd 0'. Tested
with zinger, guppy, another samus, and other third party
devices to verify the flags are set as advertised in src/snk
capabilities packet
Change-Id: I4d78d1880073fdacce57516111ac6cab37b93f27
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300953
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add an interface with the host to set up gesture recognition.
Today, only significant motion is supported.
Add a virtual sensor for concentrating gesture support from host.
BRANCH=smaug
BUG=b:23570481
TEST=On ryu, enable significant motion from host.
Change-Id: I906fa2d2d7b4ca2771ea2f58b91de8d97bf4e2e3
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/296213
Add all swap commands to USB_PD_CONTROL host command: data,
power, and vconn swap.
BUG=none
BRANCH=smaug
TEST=tested on both samus and ryu while connected to each other.
Change-Id: I280a0da2d3c5a5436243134ab3f2ec353ebf6ab8
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/299290
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
PD charger voltage + current can now be limited with
EC_CMD_EXTERNAL_POWER_LIMIT. The limit is automatically cleared when the
AP transitions out of S0 into S3 / suspend.
BUG=chrome-os-partner:43285
TEST=Manual on Samus w/ zinger.
- Plug zinger, verify charging at 20V/3A.
- `ectool extpwrlimit 3000 12000 --dev=1`, verify charging at 12V/3A
- `ectool extpwrlimit 1000 5000 --dev=1`, verify charging at 5V/1A
- Plug zinger into other port, verify still charging at 5V/1A
- `powerd_dbus_suspend`, verify charging at 20V/3A
- `chglim 2000 12000`, verify charging at 12V/2A
- `ectool extpwrlimit 0xffff 0xffff --dev=1`, verify charging at 20V/3A
- `chglim 1000 20000`, verify charging at 20V/1A
- `chglim`, verify charging at 20V/3A
BRANCH=ryu
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6cd5377be91b3df75f99cb414fd3fa5a463b56cb
Reviewed-on: https://chromium-review.googlesource.com/293954
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
To ease driver loading in the kernel, add a bit in the feature field
to indicate the EC has an internal software FIFO for sensor events.
BRANCH=smaug
BUG=chrome-os-partner:39900
TEST=compile, kernel modules load as expected on Smaug.
Change-Id: I1ae0b9ebb587bb4939745e8a0e16d73d95ba31d7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/285774
Reviewed-by: Alec Berg <alecaberg@chromium.org>
When FIFO overfills, keep track of the number of lost vectors per
vector types. This way, when we calculate timestamps in user space,
we can evaluate the number of empty slots to skip per vector type.
This is important when different types are samples at very different
frequencies.
BRANCH=smaug
TEST=Check that when we drop events, the timestamp are better than
without.
BUG=chrome-os-partner:39900
Change-Id: Ib9cb994ada38373e5a49dd4ba2123ca7534a169e
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284615
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Was comparting a int16_t with 0x8000 leading to:
error: comparison of constant 32768 with expression of
ec-utils-0.0.1-r2377: type 'int16_t' (aka 'short') is always false
(Builder: Chromium OS (x86) Asan (stats) 7005)
BRANCH=smaug
TEST=On Smaug check that ectool does report invalid temperature
when EC returns 0x8000.
Check the temperature is correct when the EC returns a valid
temperature.
BUG=chromium:508674
Change-Id: I2a1414cf7bf018ecaa7ff8dd37c76804de4bce52
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284673
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Achuith Bhandarkar <achuith@chromium.org>
