gpio_set_alternate_function() used 0 to mean "normal GPIO function".
But on chips like STM32L, alternate function 0 is actually a function
on some pins. So change "normal GPIO function" to -1.
Also add support for this on STM32L.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build and boot link and daisy
Change-Id: I9cdd9ad91a315b616e373a0dc9a50545cf9d20fa
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47903
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Nothing has used this since link EVT, so it's just dead code at this point.
BUG=chrome-os-partner:13213
BRANCH=none
TEST=manual
- Update ectool but leave old firmware
- ectool version -> works
- ectool flashread 0 0x10000 foo -> puts the first 64KB of EC flash into foo
- Update firmware
- ectool version -> works
- ectool flashread 0 0x10000 foo -> puts the first 64KB of EC flash into foo
- power+esc+refresh -> recovery mode
Change-Id: Ib25a705bcd8280d5295c8e7890969d796542b6c9
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47866
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Make internal APIs static, and remove board_ prefix for clarity.
Move TSU6721 calls from charger task to extpower_usb functions for
better encapsulation.
No functional changes, just moving code. Yes, this will make
cherry-picking back from spring to TOT less convenient, but now the
code is more readable and it will make maintaining the PMU code easier
as we add boards.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build spring
Change-Id: I52b37e57fc8519859996a110b0503277c6f0bbc8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47657
And use them for LM4 as well as STM32. Consistency is good.
No functional changes, just moving/renaming code.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I029a21fadb50726500255219dc38615874a369e7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47700
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This changes current TASK() syntax to TASK_BASE() and TASK_NORMAL(),
where TASK_BASE is necessary for the EC to boot on a board and
TASK_NORMAL represents the task that can be removed in a test binary.
Tasks introduced by a test should be listed as TASK_TEST().
Note that this CL breaks current tests (many of them are broken anyway),
which will be fixed in up coming CLs.
BUG=chrome-os-partner:18598
TEST=Build link/bds/spring/snow/daisy/mccroskey. (mccroskey failed for
unrelated issue)
BRANCH=none
Change-Id: Ic645cdae0906ed21dc473553f1f43c2537ec4bb9
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47531
There's no chipset for mccroskey, so its keyboard code stopped compiling.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build mccroskey, spring, link
Change-Id: If94dfaf2819f047a6aa825ee10aa1d320c8ca882
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47566
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
And remove the daisy power button LED task for now. Since daisy
didn't have a board.c implementation (or a power button LED), its
power LED task did nothing.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build daisy, snow, spring
Change-Id: I1eb3d0bd038d88685e7caad087eb1a1d1495ef9a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47442
Reviewed-by: Vic Yang <victoryang@chromium.org>
Board configuration interfaces are now defined in board_config.h, not
in every board.h file.
Tidied /alphabetized CONFIG defines.
No functional changes, just rearranging code.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all targets
Change-Id: I6196591784f8fa9ce6dfccd31891b679fb200063
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47419
Hard reset is done by shorting 3.3V to ground. This is only really
necessary to work around the PMU's I2C engine getting into a weird /
uncommunicative state.
This should not make any functional changes; the code is behaving the
same way it did before.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build daisy, snow, spring
Change-Id: I0edbdfc11bd5f6643075ffc83f4df3e11fc14675
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47199
There's no need for it to be initalized in board_init(); it just needs
to be done before ADC / I2C / SPI initialize.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=boot spring; verify EC communication and 'adc' console command still work
Change-Id: I6039848fe031222d5ca59b459adfe18fc3e8ef08
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47182
Reviewed-by: Vic Yang <victoryang@chromium.org>
This is useful for debugging and the factory.
BUG=chrome-os-partner:18530
TEST=On spring, check we can set PWM duty cycle and can go back to
automatic control.
BRANCH=spring
Change-Id: I3da75f0a356cc0f21d748bf135e3b95fbd9c465b
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47105
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This was left over from the way we reported keyboard recovery early in
link/snow, before we had host events. No shipping EC ever reported it.
Coreboot and u-boot look for this flag, so we can't repurpose it until
they ignore it too.
BUG=chrome-os-partner:18512
BRANCH=none
TEST=compile link,spring
Change-Id: I38fbf0fa7d958c3774c8b293d4be25faaecdadea
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47058
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This will allow ARM code to use the same lid switch code (in a subsequent CL).
BUG=chrome-os-partner:18343
BRANCH=none
TEST=open lid; system boots. close lid; system suspends. open lid; resumes.
Change-Id: I83536a3ad24c4446dccf8a6b6e296756659070a8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47043
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This is a cleaner way of deferring work from interrupt-time to
task-time without requiring a task for each module which needs this.
Replaces/supersedes delayed hook notification, which didn't scale well
(since every function would have needed to be its own hook type).
BUG=chrome-os-partner:18473
BRANCH=none
TEST=boot system. plug/unplug AC power; notifies the host properly
Change-Id: I50263fe1ce37e74c1ef8db3671379098997102ed
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46953
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This way debug commands which previously took only yes/no or on/off or
enable/disable can take any of those options.
BUG=chrome-os-partner:18467
BRANCH=none
TEST=Try "on", "off", "yes", "no", "true", "false", "ena", "disable", for
each of the following commands:
- ilim (spring)
- pll (link)
- power (spring/snow)
- hcdebug (all)
- kblog (link)
- ksscan (all)
- lp5562 (spring)
Change-Id: Ie8e0fae3775b1da711864bcba6682ba5e68a06f1
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46900
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This is in preparation for cleaning up the 8042 protocol stack and
merging the typematic and i8042cmd tasks.
No functionality change, just shuffling code and renaming functions.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=boot link and type on its keyboard
Change-Id: Iefc41cd5b8d18ac87830bff3080cfff92e9d10d2
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46805
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Scanning is now performed identically on all platforms. keyboard_scan
talks to chip-specific keyboard_raw on the bottom end, and 8042 or mkbp
keyboard protocol on the top end.
8042 can now take advantage of CONFIG_KEYBOARD_TEST to simulate scan results.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=compile all boards; test keyboard on spring and link
1) Type on keyboard. Should produce keystrokes.
2) At EC console:
kbpress 3 7 1
kbpress 3 7 0
Should produce 'r' keystroke(s); key repeat should kick in if you wait
a while between the commands.
3) Hold power button while typing. Should not produce keystrokes.
4) Reboot with power+refresh+esc. Should go to recovery mode.
5) While the system is up, alt+volup+R should reboot the AP.
Change-Id: I48e0bca15b869162672b5f54ffcb561f6fcf0f45
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46666
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This is part one of a series to merge the keyboard scan interface to
be common across all platforms.
This change just moves and renames files and APIs and removes some
read code, and sets up protocol-specific CONFIG options. It makes the
next CL which actually merges keyboard scanning easier to parse.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=compile all boards; test keyboard on spring and link
Change-Id: I815a40aae4e5d5f333b8501aff9656080533d913
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46549
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This mode was disabled initially to make sure it didn't side-effect
things during early development. Now that branch is cut lets
re-enable and backport when stability is proven.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=spring
BUG=chrome-os-partner:17587
TEST=manual, install & run on Spring ... system functions.
When device is plugged stays awake regardless of battery state.
When device is unplugged sleeps and power is saved.
When device is re-plugged awakes.
Change-Id: I9a85fa7376d1a94c9864beed3d053e8b49480959
Reviewed-on: https://gerrit.chromium.org/gerrit/45594
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
These were previously duplicated between multiple keyboard_scan.c and
board.c files, and there were a bunch of different constants #defined
to be 13.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=compile all boards; test keyboard on spring and link
Change-Id: I91bf9d56d2a56ff25ff307ff10883ca87b6937e5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46165
This is the low-level platform-dependent interface to drive keyboard
columns, read rows, and handle keyboard interrupts.
Both lm4 and stm32 had something like this before, but the interfaces
weren't fully explicit or compatible.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=manual
- Build all platforms.
- Boot system and test typing on keyboard.
- Hold power+refresh+esc to test boot key detection; should go to recovery.
Change-Id: Ie3bcc1d066a4da5204f0e236daeb52c4064a6213
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46156
When battery level is too low, we want to keep the AP off even when a
power on event is received. Current threshold is set to 1 mAh.
Note that after this change, a board without a battery will need to wait
for 15 seconds before it can boot up.
BUG=chrome-os-partner:18318
TEST=Press power button and see power on event ignored. Charge battery
to over AP off threshold and check we can power on the system.
BRANCH=spring
Change-Id: If32a1935a69be102778bde7ad8976eea0921f87e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45825
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The implementation is identical on all stm32 hardware, so remove all
the duplicate copies from board.c files. mccrosskey doesn't have
GPIO_EC_INT so stub it out like we do on bds.
No functional change, just moving code.
BUG=none
BRANCH=none
TEST=build mccrosskey,daisy,snow,spring
Change-Id: I7d4378650d7b4c640c15180c41459a41620f5bd3
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45920
It's not board-specific, so move it out of board.c.
No functional changes; this is just moving code and renaming a few functions.
BUG=chrome-os-partner:18256
BRANCH=none
TEST=build spring
Change-Id: Ib004066aed93745cb0c96d3cb45d70b728545492
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45918
We have a common chipset interface for performing a warm reset of the
AP, so move the implementation from system_warm_reboot() there. (It
was never a system function anyway; system = EC+AP; chipset = AP)
No functional change; just renaming functions.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build daisy,snow,spring,mccroskey
Change-Id: Ibc2c5efced5660c4335cd1868470184397800acd
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45891
It's only board-specific in that we've only needed it on snow so far.
But by that logic, x86_power would be board specific because we've
only needed it on link.
No functionality change, just moving code between files and renaming
the interface to indicate it's not board-specific.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build daisy,snow,spring
Change-Id: I35debdaa71829d55a2fbc5d3c62b2aaf6e467633
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45879
When Toad's ID changes, VBUS goes low for 10ms. This, however, is not
picked up by TSU6721 and thus we need to monitor VBUS and reset TSU6721
when necessary. By resetting TSU6721, we can force it to update device
type.
BUG=chrome-os-partner:18292
TEST=manual
BRANCH=spring
Change-Id: Ib96bbb0f101c8c5f5371591603af2dee27f01cc8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45727
This includes:
- Discharging with AC present now recognized as battery assist mode
- Trigger LED update every second instead of from PMU task
- Minor breathing effect optimization
- Control LED power and color from the same task to prevent
simultaneous access to LED driver
BUG=chrome-os-partner:18244
TEST=Manual
BRANCH=spring
Change-Id: I9b34934f46cd4f04aaa7ca30cbe90316aec3e61e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45632
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Code cleanup: declare keyboard_scan_interrupt() once, not per board;
the implementation is common anyway.
No functional changes; just renaming.
BUG=none
BRANCH=none
TEST=build daisy,snow,spring,mccrosskey
Change-Id: I1e33cbe2c868bc47b641d36d26f07c3b5a7ba3c7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45874
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Now that it doesn't need to leverage SWITCH_TASK to send the AC_CHANGE
notification, pure GPIO-based external power detection can move from
switch.c to its own file.
BUG=chrome-os-partner:18256
BRANCH=none
TEST=add AC power, UI shows charging indicator; remove AC, indicator goes away
Change-Id: Id495f34185b7d971c241ac6d0a8311a6bf544507
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45789
Using code like this, modules which service interrupts and notify
hooks will no longer need to have their own tasks to call
hook_notify() from. They can share the hook task as long as they
don't mind the notification possibly being deferred.
BUG=chrome-os-partner:18256
BRANCH=none
TEST=add AC power, UI shows charging indicator; remove AC, indicator goes away
Change-Id: I1bc32d21b2202c3242d39e0fc533198cd5bb9c66
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45780
Modules that need to find out about charge/power state no longer need
to use the lower-level switch API.
(This will matter more in future CLs which handle conditions like
"external power present, but at low power so we're doing battery
assist" - that can simply be state=discharging,flags=external_power_present.
BUG=chrome-os-partner:18256
BRANCH=none
TEST=add AC power, UI shows charging indicator; remove AC, indicator goes away
Change-Id: I62130a4e089297fa47ab03f6a76082593c936761
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45515
Reviewed-by: Vic Yang <victoryang@chromium.org>
The power LED now has its own tick-based handler which knows how to
blink the LED and resend the desired LED state to work around the
flaky 1-wire connection.
Removes a bunch of LED state code from charge_state.c.
No user-visible impact. Does not need to go into link branch.
BUG=chromium-os:18256
BRANCH=none
TEST=manual
1) Discharge battery to <97%
2) Plug in AC. LED=yellow
3) 'ectool chargeforceidle 1' from root shell. LED=blinking green/off.
4) 'ectool chargeforceidle 0' from root shell. LED=yellow.
5) Wait for battery >= 97% (or 'battfake 98' from EC console). LED=green.
6) Unplug battery. LED=red (may take 10 sec).
7) Replug battery. LED=green.
Change-Id: I999ee3e1abe269bb3f737bbc75e0b872316605ce
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45469
Reviewed-by: Vic Yang <victoryang@chromium.org>
This makes it possible to have ADC module monitor an input voltage and
trigger interrupt when it goes out of accepted range.
BUG=chrome-os-partner:18171
TEST=Manual
BRANCH=spring
Change-Id: Ia0c981fadd9bcaa40afe30ca2624c2f3644b95fe
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45277
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
In order to update charger status we have added a virtual keystroke to
signal change to the kernel via the MKBP interface.
CL creates the virtual key press and calls it from within the
USB charging code.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BUG=chrome-os-partner:17927
BRANCH=spring
TEST=manual
1. Compile for daisy,snow,spring.
2. Test on spring.
Change-Id: I0afa0fc82c96fa3fd8119523a113b5028c8f64a3
Reviewed-on: https://gerrit.chromium.org/gerrit/45126
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
This enables the EC to switch the signals to ANX7808 properly.
BUG=chrome-os-partner:18165
TEST=Manual on reworked Spring board
BRANCH=none
Change-Id: Ib3ff57e17afab9ba8fc78fdb037e65aae844f38b
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44897
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This allows the AP to shut down cleanly. If it doesn't shut down in
that time period, the EC will forcibly shut it down.
BUG=chrome-os-partner:17124
BRANCH=link
TEST=manual
1. With system off,
- battfake 2 -> EC hibernates immediately
2. With system on,
- battfake 2 -> battery shutdown event posted to AP
- power off system manually within 30 sec -> EC hibernates
3. With system on,
- battfake 2 -> battery shutdown event posted to AP
- do not power off AP
- after 30 sec, EC shuts down AP then hibernates
4. With system on,
- battfake 2 -> battery shutdown event posted to AP
- after 15 sec, apply AC power
- system does NOT shut down
- remove AC power -> battery shutdown event posted to AP
(because battfake 2 is still faking 2% battery left)
- after 30 sec, EC shuts down AP then hibernates
(check to make sure the full 30 sec elapses; the timer
should have been restarted when AC power was removed;
if the EC shuts down the AP immediately this is a
failure indicating the timer is still running from
the first shutdown event)
Change-Id: I1a13765f501d705d3a580b2acbbb173d47e020ff
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44413
This preserves more battery for the real-time clock. It also gets rid
of one battery level/state, since the EC will now shut down at the
same level (2%) as the AP.
Having the EC hibernate at the same level as the AP shuts down also
prevents the following weird scenario:
- EC powers on at 2% battery.
- EC won't power on the AP to do software sync because battery is low.
- But the charge state machine won't actually hibernate the EC until 1%.
- Between 2% and 1%, AC is inserted and system starts charging.
- But EC-RO is what's doing the charging; we should go through software sync
before charging.
BUG=chrome-os-partner:17124
BRANCH=link
TEST=manual
On battery power,
1) With system on, battfake 2 -> system shuts down and EC hibernates
2) With system off, battfake 2 -> EC hibernates
Change-Id: I87d17f70d60673f3e3f1c6eb88f3f00a8c9ed4e7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44314
When in battery assit mode, show breathing yellow on battery LED slowly
to indicate battery is actually discharging.
BUG=chrome-os-partner:17561
TEST=Manual
BRANCH=none
Change-Id: I688470d8870b181bf2dd20b5ebcbd6e2d861c5b0
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44514
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is a precursor to changing the switch state machine to delay
powering on the AP until the charge_state module knows if there's
enough power to do so (which it will know when it leaves the INIT
state).
BUG=chrome-os-partner:17124
BRANCH=link
TEST=manual
1. Reboot EC on battery power. See charge state init->discharging
2. Plug in AC. See charge state discharging->reinit
(charge state will then transition to some other charging or idle state
based on battery level)
Change-Id: Ia02cc8b37e9b5e8d6dd8c2fbfdf14e385694b1bf
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44291
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
To decrease the amount of time needed for PMU ADC reads, add the option
to keep the ADC reference voltage enable as its stabilization time is
the longest pole.
Also set the stabilization time to 10ms as the max defined in the
datasheet.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:17997
TEST=on Spring, measure EC_CMD_POWER_INFO latency and see it going from
49ms to 18ms.
Change-Id: I7ed20bcddab165250108eb9f768539b19fa251de
Reviewed-on: https://gerrit.chromium.org/gerrit/44008
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Since TSU6721 processing is integrated into PMU task, an interrupt
closely following previous one may be dropped. We should check interrupt
status before yeilding control.
BUG=chrome-os-partner:14319, chrome-os-partner:14318
TEST=Boot on Spring. Check TSU6721 functionality.
BRANCH=none
Change-Id: I7ce1c70a214bb4afc9456eb206203cc6c3fe2f33
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/43862
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Getting voltage and current can be handy when verifying hardware design.
Let's add host command to do this.
BUG=chrome-os-partner:17880
TEST=Manual on Spring
BRANCH=none
Change-Id: I4d4f6a42a9d0f917292d092e132ccd9ce3367fd6
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/43508
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The new 'battfake' command is really handy for testing low-battery
shutdown logic.
BUG=chrome-os-partner:17124
BRANCH=link
TEST=from EC console:
reboot
battfake -> using real battery level
power on system -> lightbar should be blue
battfake 5
lightbar turns red after a few seconds
UI shows battery is very low
(shows <5% due to different kernel math)
'ectool battery' from root shell shows present capacity ~5% of
design capacity
remove AC power
battfake 4
UI shows low-battery screen and shuts down (may take a minute)
battfake 50
power on system
UI shows battery at 45-55%
battfake 2 -> system shuts down immediately
battfake -1
power on system
UI shows actual battery level
Change-Id: I3180e321241c0f586f3baad2150fb6a2b2d2e242
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/43151
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
In preparation for cleaning up low-battery logic. Make clear what
comparison operator is used for each constant (<=, <, >=, >).
Also remove hard-coded and unused display of design warning/low
battery levels from ectool. Verified via code search that these are
not used anywhere. Even if we later care about these levels, they
should be battery-specific and not hard-coded as a
platform-independent percentage of full capacity when ectool is
compiled.
BUG=chrome-os-partner:17124
BRANCH=link
TEST=compile link; 'ectool battery' from root shell prints valid info
Change-Id: I3650e27a08f4cc77067beb0685ee1488cc56d02f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/43119
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This uses D+/D- voltage to distinguish different Apple chargers.
BUG=chrome-os-partner:14319
TEST=Manual on Spring
BRANCH=none
Change-Id: I50075d466f6e6b1adf613748cf433d7f43c04bfe
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/42850
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This implements a basic battery LED policy:
- Charged: green
- Charging: yellow
- Error: red
- No charger: off
BUG=chrome-os-partner:17561
TEST=Manual
BRANCH=none
Change-Id: I7fa8242efa4d0382d8ef0cafe80f01d44c390397
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/42607
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
