Created a host command to set/get various motion sensor parameters and
added an ectool command to use that host command.
The host command is created such that the first argument is a
sub-command. Sub-commands created include:
dump: dumps all current motion sensor data
info: returns general information about each motion sensor
ec_rate: set/get the EC sampling rate of sensors
sensor_range: set/get the sensor range (ie +/- 2G,4G,8G)
sensor_odr: set/get the sensor output data rate (ie 50Hz, 100Hz, ...)
For sensor_range and sensor_odr parameters, since the host doesn't know
what are valid values for the parameter, the host can specify to round
up or down to the nearest valid value. For example, the host can specify
to set the output data rate to at least 100Hz, and the EC will return
the closest valid output data rate that is at least 100Hz.
BUG=chrome-os-partner:27321
BRANCH=rambi
TEST=Test on a glimmer using ectool from vt-2 prompt:
> ectool motionsense help
Usage:
motionsense - dump all motion data
motionsense info NUM - print sensor info
motionsense ec_rate [RATE_MS] - set/get sample rate
motionsense odr NUM [ODR [ROUNDUP]] - set/get sensor ODR
motionsense range NUM [RANGE [ROUNDUP]]- set/get sensor range
>
> ectool motionsense
Sensor 0: 0, 0, 1024
Sensor 1: 1024, 0, 0
Sensor 2: None
> ectool motionsense info 0
Type: accel
Location: base
Chip: kxcj9
> ectool motionsense ec_rate
10
> ectool motionsense ec_rate 1000
1000
> ectool motionsense odr 0
100000
> ectool motionsense odr 0 40000 1
50000
> ectool motionsense range 0 8
8
After running this I verified on the EC console that all the parameters
were set appropriately. I tested the EC sampling rate was 1000ms by
running lidangle on and making sure samples were displayed roughly every
second. I verified the sensor odr and range by defining
CONFIG_CMD_ACCELS and typing:
> accelrange 0
8
> accelrate 0
50000
Change-Id: I444e2f0eafabd607f1c7aa78b5c4e91f6cb06387
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/192064
Reviewed-on: https://chromium-review.googlesource.com/193307
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added motion sense task to Clapper and Glimmer. This task samples
the accelerometers and calculate a lid angle. Note that as
the machine is rotated towards the hinge angle aligning
with gravity, the lid calculation becomes less trustworthy.
Added a math_util file to hold various mathematical functions
useful for calculating lid angle that may be helpful in other
places.
For each board with accelerometers we need to define some
orientation specific data in board.c. There is a calibration
procedure through the EC console that can be enabled by
defining CONFIG_ACCEL_CALIBRATE. The calibration procedure can
help determine the orientation data required.
For debugging purposes there is a console command to regularly
print to the EC console the accelerometer data and derived lid
angle. The console command can be enabled by defining
CONFIG_CMD_LID_ANGLE.
BUG=none
Original-BUG=chrome-os-partner:24703
BRANCH=rambi
TEST=Ran the calibration procedure on a Glimmer unit, and then
rotated the machine in space. Verified that the lid angle
calculated roughly matched actual lid angle.
Original-Change-Id: I63a5e384b7f6b628b4ea01de49843355fb8d6ebe
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/184783
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Alec Berg <alecaberg@chromium.org>
(cherry picked from commit efb07945a5159fa0e7a746c666b2519ebdca9c22)
Conflicts:
board/clapper/board.c
board/clapper/ec.tasklist
board/glimmer/board.c
board/glimmer/ec.tasklist
Change-Id: Ibc492ef5c11e7084e87f01338c4d7775f9a08c18
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187433
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added accelerometer driver for kxcj9 accelerometers. Currently
the accelerometers aren't being used by anything, but there are
console commands, accelwrite and accelread, to perform transactions.
BUG=none
BRANCH=rambi
TEST=Used EC console commands to test that accelerometers respond
and data looks reasonable.
Original-Change-Id: I6ddcf04ec278adeacb148c19b10c3c296b467954
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/184693
Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 5e1d2052b034b2400b98b2126243e01397a2ce56)
Conflicts:
board/clapper/board.c
board/clapper/board.h
board/glimmer/board.c
board/glimmer/board.h
Change-Id: If8744ddc3273fc08e29830adfd068dc302dd120a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187432
Reviewed-by: Randall Spangler <rspangler@chromium.org>
