Allow a charge port to be selected as the override port, which means it
will always be selected as the charge port, if any charge supplier is
available.
BUG=chrome-os-partner:32003
TEST=Attach PD charger and BC1.2 charger. Verify that active charge port
switches to BC1.2 after running `chargeoverride [port]` from console.
Also, pass unit tests.
BRANCH=Samus
Change-Id: Ia1b48ca89641842d51be7eed3b92d36d3eedc9ef
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227730
Reviewed-by: Alec Berg <alecaberg@chromium.org>
When a PD charger is detected, gets its max charge capability, but
initially negotiate for its minimum charge mode. If we later determine
that the port will be the one active charge port, re-negotiate for the
max charge capability.
BUG=chrome-os-partner:32003
TEST=Manual on Samus. Plug in Zinger, verify that current limit is
initially set to 500 mA, then switches to 3000 mA shortly after. Plug in
two Zingers, verify that one provides 3000 mA current while the other
negotiates to 500 mA. Verify that the 500 mA charger bumps up to a high
current once becoming active.
BRANCH=Samus
Change-Id: Ifa562b72d763642fc8bd62bc7f5aaa4eda1ef950
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225922
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Allow the list of charge suppliers and port selection priority to be
specified at the board level.
BUG=chrome-os-partner:32650
TEST=Manual on samus_pd. Plug + unplug PD and BC1.2 chargers, verify
that PD is always preferred and higher power port / supplier is always
selected.
BRANCH=Samus
Change-Id: Ic867a40120c809111bf76bf290ed6f204eab1168
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225292
Reviewed-by: Alec Berg <alecaberg@chromium.org>
charge_manager is intended to manage charge limits from various tasks
(typically PD charge tasks and USB / BC 1.2 charge tasks). These tasks
can update the charge limit of a port by calling charge_manager_update
(thread-safe function). If the charge limit has changed,
charge_manager_refresh will be queued as a deferred task, which will
select the "best" charge port and set the proper charge limit.
In order to use charge_manager, a board needs to do the following:
1. Declare PD_PORT_COUNT in usb_pd_config.h
2. Implement board_set_charge_limit
3. Implement board_set_active_charge_port
4. Call charge_manager_update whenever the available charge on a port changes.
BUG=chrome-os-partner:31361
TEST=Manual on samus_pd, with subsequent commit. Insert and remove
various chargers, check console to verify PD charger always has priority
and correct current limit is set based upon 'best' charger.
BRANCH=samus
Change-Id: Iede120b69e0b46ed329bcf9b7e07c39ba5e9f77b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222723
Reviewed-by: Alec Berg <alecaberg@chromium.org>
