No code changes, just tidying some comments and moving a TODO to a bug.
BUG=chrome-os-partner:23557
BRANCH=none
TEST=compile any project; hey, this is just a change in comments.
Change-Id: Ib1e3190ac9abdc90fb04c785e1f20b9cc66b1bc3
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174447
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
First implementation of a low power idle task for the LM4 chip. The
low power mode is selected by defining CONFIG_LOW_POWER_IDLE in a
board.h file. This commit turns it on for Peppy, Slippy, and Falco
only because those are the only boards tested.
When using the low power idle task, the chip goes in to deep sleep
when it can. Deep sleep disables clocks to most peripherals and puts
the onboard flash and RAM into a low power mode. The chip is woken
out of deep sleep using the RTC in the hibernate module. Increased
the idle task stack size to handle more involved idle task.
In board.c, the array of GPIO info can be used to select which GPIO
points can wake up the EC from deep sleep. Currenlty selected are
the power button, lid open, AC present, PCH_SLP_S3, and PCH_SLP_S5.
Additionally the port with the KB scan row GPIO point is also
enabled to wake up the EC from deep sleep.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
BUG=None
BRANCH=none
TEST=Passes all unit tests. Runs on slippy, peppy, and falco with no
noticeable side affects. Verified that the power consumed by the EC
is lower when in S3, S5 and G3 by scoping the sense resistor
powering the chip.
Change-Id: I83fa9a159a4b79201b99f2c32678dc4fc8921726
Reviewed-on: https://chromium-review.googlesource.com/172183
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
This adds back missing "hook" channel name. Also add a build assertion
to make sure we don't miss this again.
BUG=chrome-os-partner:21801
TEST=Build all boards. Remove "hook" channel and check build fails.
BRANCH=None
Change-Id: I373016504fd3753e1a791077d49b3af14b2b1aa4
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169703
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Saving + restoring the channel print mask previously involved running
the 'chan' command with no parameters, then parsing the output. This
parsing is unreliable if other tasks are also writing to the console.
Add commands to save / backup the current channel mask, and later
restoring it. Typical method to limit channel mask will now be:
chan save
chan <mask>
...
chan restore
BUG=chromium:269758.
TEST=Run 'chan save' / 'chan 0' / 'chan restore' on EC console, verify
print mask is restored.
BRANCH=Peppy/Falco.
Change-Id: I725c7fb5e3ac7e55ed5f435446f8fc5c54af165f
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65208
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is part one of a series to merge the keyboard scan interface to
be common across all platforms.
This change just moves and renames files and APIs and removes some
read code, and sets up protocol-specific CONFIG options. It makes the
next CL which actually merges keyboard scanning easier to parse.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=compile all boards; test keyboard on spring and link
Change-Id: I815a40aae4e5d5f333b8501aff9656080533d913
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46549
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Since it handles not just power button, but also lid switch, AC
detect, and other switches.
No functional changes; just renaming.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system, power on/off with power button
Change-Id: I51628a52293f7207715f5f6bf368a08fe6c3dbce
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36821
Now both copies of the event state live in host_event_commands.c, and
lpc / memmap just shadows the main copy.
BUG=chrome-os-partner:11172
TEST=manual
Boot system. should see events 0x2000, 0x80, 0x08 get set and then cleared.
At U-boot prompt, type on keyboard. Should set event 0x1000 get set,
but only on the first keypress (because U-boot doesn't consume that
event).
Then from EC console,
hostevent clear 0x1000 -> see event 0x1000 clear
hostevent clear 0x1000 -> no debug output (it's already clear)
hostevent clearb 0x1000 -> see event copy B 0x1000 clear
hostevent clearb 0x1000 -> no debug output (copy B is already clear)
Change-Id: I855c035865649ba1490cd9027157d5bcdcc9895f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27321
No code changes, just rearranging source in preparation for an
experiment to see how much the binary shrinks if we disable the
interactive console.
BUG=none
TEST=none
Change-Id: Ie21f1b3dcd04272e80fd40b2ed54d1eaf7fb1cdf
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/25232
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
