To test drivers, we need a way to fake I2C periphrals. With this CL, a
fake peripheral can be done by declaring its own I2C read/write
functions. The fake I2C peripherals may return EC_ERROR_INVAL to
indicate it's not responding. The emulator I2C read/write call scans
through all registered I2C peripherals and uses the first response.
BUG=chrome-os-partner:19235
TEST=Pass sbs_charging test with the next CL.
BRANCH=None
Change-Id: I9380dc40e147781b42e09eb6979c864bbd9f2ac4
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169511
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This checks boot key combination like Power-F3-ESC and Power-F3-Down can
be properly detected.
BUG=chrome-os-partner:19236
TEST=Pass kb_scan test
BRANCH=None
Change-Id: I180918977299219a8421798dac2ab9fed84ef9a2
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167802
When running an unit test, the emulator is sitting in idle task for most
of the time. Since we don't have interrupt support now, the emulator is
just waiting for the next wake-up timer to fire. To save time, we can
actually just figure out which task is the next to wake up, and then
fast-forward the system clock to that time.
With this, all tests run faster and we can remove time-scaling for all
current tests. This improves not only run time but also stability.
If one day we have interrupt support, then we will have to modify this
to take into account the fact that an interrupt might wake a task before
any wake-up timer fires.
BUG=chrome-os-partner:19235
TEST=Run all tests in parallel for 1000 times.
BRANCH=None
Change-Id: I4cd33b041230267c110af015d425dd78d124f963
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167801
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Before this change drivers had no way of knowing that a frequency
change was coming. This could cause problems for some drivers (like
i2c) that need to make sure that a transaction isn't happening while a
frequency change is happening.
The PRE_FREQ_CHANGE archiecture is very simple here and we don't allow
any way to cancel it.
At the moment, we guarantee:
- We won't call PRE_FREQ_CHANGE with interrupts disabled, so acquiring
locks / sleeping is OK.
- We'll call the actual HOOK_FREQ_CHANGE after the PRE_FREQ_CHANGE.
PRE_FREQ_CHANGE and HOOK_FREQ_CHANGE should not use deferred function
calls.
BRANCH=pit
BUG=chrome-os-partner:22093
TEST=With all patches together:
- on AP: suspend_stress_test
- on EC: battery 10000 50
Change-Id: I2731a3e85d41e749fa571fdb74b5c9b12043cda6
Signed-off-by: Doug Anderson <dianders@chromium.org>
Previous-Reviewed-on: https://chromium-review.googlesource.com/167101
(cherry picked from commit d84c0dbbf7c5a72917a820e292ecfdfa698d0fb9)
Reviewed-on: https://chromium-review.googlesource.com/167148
Reviewed-by: Randall Spangler <rspangler@chromium.org>
With this, the emulator is able to reboot itself without the help of
run_host_test script. This makes it easier for development and also
speeds up the test.
BUG=chrome-os-partner:19235
TEST=Pass all tests
BRANCH=None
Change-Id: Ifa510442de19256c671ab91b6bc75fe9e8b9dc7b
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62969
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reset flags should be set properly according to reset type. Also, on
system jump, current time should be preserved.
BUG=chrome-os-partner:19235
TEST='sysjump rw' and check time is the same.
TEST='reboot hard' and see '[Reset cause: hard]'
BRANCH=None
Change-Id: I00fd2c652d10c237f23cc6a33e0b667422bc625d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62958
Reviewed-by: Randall Spangler <rspangler@chromium.org>
By 'make coverage', lcov is used to generate test coverage report in
HTML format stored in coverage_rpt folder.
BUG=chrome-os-partner:19235
TEST=Generate a report.
BRANCH=None
Change-Id: I44142eaaeb897cf09179764781120370920144cd
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58203
This creates a separate thread that keeps reading characters from stdin
and feed to UART process.
BUG=chrome-os-partner:19235
TEST=Start up a emulator and type 'help'. See command list.
TEST=Pass all tests for 300 times.
BRANCH=None
Change-Id: I190c1d939b0b4ad0f8f0517d8d7b06f2f3df3832
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/57866
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This enables ASSERT() for easier debugging.
BUG=chrome-os-partner:19235
TEST=Add ASSERT(0) in lid_sw test and see error message:
ASSERTION FAIL: test/lid_sw.c:91:run_test - 0
BRANCH=None
Change-Id: I7df7d5984e5d787fdc5ad2b6b24fec669e95c97e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/56691
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This reverts commit c58c01b14c.
Let's add time scaling back, but keep the default scale to 1. The
emulator behavior should be entirely the same. If a test need to be
speeded up, the scale can then be set for that test only.
BUG=chrome-os-partner:19235
TEST=Pass all tests.
BRANCH=None
Change-Id: I648780577a1ae2f964c30c71077ccf9bf38b9735
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/51550
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The timer is the only source of timing for the emulator. This means we
can make it go faster without breaking the tests. This CL sets the
default scale to be 3x faster than normal time.
BUG=chrome-os-partner:19235
TEST=Pass all tests. Check the tests run faster.
BRANCH=None
Change-Id: Ib9035884b34f41c4e9aa2206284b5f1ec8fc0d1f
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/50956
Several test utility macros have been duplicated across tests. Let's put
them in a single place.
BUG=chrome-os-partner:19236
TEST='make runtests', 'BOARD=spring make tests'
BRANCH=None
Change-Id: Ib0c9f829715425cc23e33b8ef456b17dfadab13c
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/50513
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
On 64-bit platform, arrays should be aligned to 8 bytes. Also, change
the order of host_command fields so that it's packed on both 32-bit and
64-bit platforms.
BUG=chrome-os-partner:19257
TEST=Pass all tests. Print out and check the content of host commands.
BRANCH=None
Change-Id: I350a903bc11562d6d205c402548942f8967b75a5
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/50467
Perviously we use uint32_t for this, but this doesn't compile for 64-bit
environment (and likely doesn't for 16-bit either.) Use uintptr_t so that
we don't get size mismatch errors.
BUG=chrome-os-partner:19257
TEST=Run host emulated tests
BRANCH=None
Change-Id: I3cd66a745fa171c41a5f142514284ec106586acb
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/50358
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is the first version of pthread-based RTOS emulator. With this, we
will be able to test high-level modules entirely on the host machine.
BUG=chrome-os-partner:19325
TEST='make runtests' and see tests passing.
BRANCH=None
Change-Id: I1f5fcd76aa84bdb46c7d35c5e60ae5d92fd3a319
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49954
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
