Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7461
TEST=manual
make BOARD={bds,link,daisy}
make tests
flash link system and make sure it boots
Change-Id: I1241a1895c083e387e38ddab01ac346ca4474eb9
Useful when debugging to determine if a user has an official build or
not, particularly early in the devel process where we're handing
builds to everyone. Particularly useful for proto1, since not all
those systems will be case-open servo-attached.
Also move get-version LPC command into system.c, where it's closer to
the system functions it calls (matches what we do for other host
commands).
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=none
Change-Id: Idb0f6edf31ca00e32f083be0b0d3f23ab79c5fba
This is necessary to support SCI/SMI events.
Note that this breaks compatibility with previous ectool builds - and
probably also breaks flashrom support.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8253
TEST='ectool hello' and 'ectool flashinfo' still work
and 'ectool usbchargemode 3 1' fails with error 2
Change-Id: If39e5b6e7cdcec1b5ec765594e8492925b430b10
We now read temp sensor readings using the EC mapped space.
So we don't need this command.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8239
TEST="ectool temps 0" works.
Change-Id: I47f425e45cea992b19734f39ac6d9f6db6433d39
Add a LPC command to control USB charging mode. Also add the command to
ectool.
BUG=chrome-os-partner:7476
TEST=Manually test on link proto-0.
Change-Id: Ica87d0a690bc86e28844bd695f31641398b21939
Signed-off-by: Vic Yang <victoryang@chromium.org>
Instead of using a runtime callback to register the console commands,
put them in a special linker section. So we can do a macro to "register"
them during the build.
It saves 684 bytes and a few microseconds at startup.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=run a few commands from the BDS command line.
Change-Id: Id33ea210b9035bf76ed720373c74c5dd24ccd1b1
Add LPC host command to get and set fan speed.
BUG=chrome-os-partner:7313
TEST=Connect a fan and manually test fan actual speed matches target
speed.
Change-Id: I4b6a711a1b8cca0dbd1c1936fe4f0f15240d3453
Add a LPC host command to read temperature sensor value with given
sensor id.
Add ectool command to read temperature sensor value through LPC.
BUG=chrome-os-partner:7329
TEST=Manual check the reading received is the same as value printed by
console command.
Change-Id: Id3386774435be6c3ae010a143f4fa894568efdb8
The LPC is not stable enough to test. Kodus Rong. He creates this idea
to checksum the partial content of flash for read/write/erase. This can
improve the robustness of flashrom.
BUG=none
TEST=Tested with flashrom.
Change-Id: I2a2f7b698a94674c03cbd8e3f15caf34f8986399
This CL add host command to enable, get/set flash write protect range.
BUG=None
TEST=Use flashrom utility to set write protect range, enable write
protect and get status.
Change-Id: I345f1eb65944d8cf8028e6fdb7e43c40cc742a6d
Signed-off-by: Rong Chang <rongchang@chromium.org>
