Previously, if the AP took fan control, the EC would never take it
back. This meant the EC would leave the fan off even if the system
was sitting at the INSERT screen or booted an alternate OS.
BUG=chrome-os-partner:15189
BRANCH=link
TEST=manual
- boot system
- from EC console, fanset 0
- faninfo shows fan at 0rpm
- from root shell, crossystem recovery_request=123 && reboot
- wait a few mins
- faninfo should show fan spinning again
Change-Id: I534c9978194085467f1df6eae971c55d4e8083be
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/35309
Factor out fan speed control for easier adjusting fan speed stepping.
Also increase number of fan speed steps from 2 to 5.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8466
TEST=Manual test.
Change-Id: I0ff601c0a4f2ed2a4867bdc6e550eb2827404754
Group temperature sensors into different types so we only have to set
temperature threshold for each type instead of each sensor.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8466
TEST=Fan control still works.
Change-Id: I7acc714c32f282cec490b9e02d402ab91a53becf
Make temp sensor report 0xfd when sensor is unpowered.
Also refactor power specification of temp sensors from thermal.c to
temp_sensor.c.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8279
TEST=none
Change-Id: Ib13813bdbac2f048fbc3b98fae5bbf104ebf37d7
Implement LPC commands and ectool commands to
1. Set/get threshold temperature values.
2. Toggle on/off automatic fan speed control.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8251
TEST=Manual test
Change-Id: Ia4282a6fa47a838aed26540f33c1eb7acc92ef0e
The thermal engine monitors the temperature readings from all sensors.
For each sensor, five threshold temperatures can be set:
1. Low fan speed.
2. High fan speed.
3. SMI warning.
4. Shutdown CPU.
5. Shutdown everything we can.
Each of these thresholds can be set to either a fixed value or disabled.
Currently the real implementation of SMI warning and shutting down is
left as TODO, as indicated in the comment.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8250
TEST=Manually change threshold value to test all actions can be triggered.
Change-Id: If168dcff78ef2d7a3203cb227e1739a08eca961e
