Accelerometer reports accelerating in mg. Fix gain to that full range
(2g, 4g or 8g) returns 2<<15.
BUG=b:73546254
BRANCH=master
TEST=compile
Change-Id: I2873a641985fa800709a2d30b031c2b6e3fcb39e
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/924407
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
LSM6DSM now use STM MEMs common functions already
used by LIS2DH12 device. Added st_raw_read_n_noinc
function to read i2c data not using auto increment
protocol.
BUG=b:73546254
BRANCH=master
TEST=Tested on discovery BOARD with LSM6DSM sensor connected on
I2C master bus interface of target board.
Using motion sense console commands is possible to enable, set data
rate, set full scale and show data from sensor (acc and gyro).
Commons function works properly for LSM6DSM.
Change-Id: I7a987306135a85abcfa9c1d3ba596fb70598fadc
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/465376
set_resolution is only used for few sensors and is not exposed to the AP.
Remove definition when sensors have a fixed resolution.
BUG=none
BRANCH=master
TEST=compile, kevin has enough space for perform_calib.
Change-Id: I8482387e135356467edaee44da3a0e47cf1db524
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/961222
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Instead getting the time for each sample in the task code, we should be
getting it as soon as the sensor reported it added it to its fifo (so
sensor just finished integration).
Because of that each sensor should provide the time when it provides a
sample, ideally from an accurate spot like an interrupt.
Deprecate motion_sense_fifo_add_unit (without a timestamp) in favour of
motion_sense_fifo_add_data (which adds the timestamps). Update all
relevant sensors to use the new api.
Note: for now I focused on the BMI160, where I actually made it get the
time in the interrupt. The other sensors were made to use the new api,
but still don't record the time in the right place (though it's not any
worse than before).
BUG=b:67743747
TEST=In the kernel, fifo_info->info.timestamp still has sane values.
TEST=CTS should still pass
BRANCH=master
Change-Id: I9829343f8702e00cc19f9c88134fa1f258c9e1e9
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/807331
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
To prevent invalid timestamping, call load_fifo only when we get a FIFO
interrupt.
In consequence, remove load_fifo entry point and only process fifo
inside the IRQ.
Add helper function to know when we are in forced mode (the EC needs to
periodically read sensor data or interrupt driven).
BUG=b:73557414
BRANCH=master
TEST=compile
Change-Id: I959e476f3f7215be95424c07223f7421e8b13da1
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/938146
Commit-Ready: Alexandru M Stan <amstan@chromium.org>
Tested-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-by: Alexandru M Stan <amstan@chromium.org>
At the end of the sensor initialization, all _init sensor routines set
the range to the default value from board.c file.
Put all the code in a single place, move it from sensor_common.c to
motion_sense.c.
BUG=none
BRANCH=none
TEST=compile
Change-Id: If89cf27c6438e0f215c193d68a480e027110174c
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/767610
Reviewed-by: Shawn N <shawnn@chromium.org>
Make FIFO a stack variable to save static memory,
Remove auto_inc argument, always set
Remove constant for rate 0.
Force board to declare sensor private data.
Avoid name collision in stm_mems_common
Include stm_mems_common.h in accel_lis2dh.h, caller only need to
include accel_lis2dh.h.
BUG=none
BRANCH=none
TEST=Compile with discovery_stmems board.
Change-Id: Id52b54dd4ec3cf217247c5511ad5a506067ad293
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/441144
Tested-by: mario tesi <mario.tesi@st.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: mario tesi <mario.tesi@st.com>
Shorten certain long prints and reduce the precision of timestamp prints
when CONFIG_CONSOLE_VERBOSE is undef'd.
BUG=chromium:688743
BRANCH=gru
TEST=On kevin, cold reset the EC, boot to OS, and verify cros_ec.log
contains all data since sysjump and is < 2K bytes (~1500 bytes).
Change-Id: Ia9390867788d0ab3087f827b0296107b4e9d4bca
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/438932
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Add driver for acc sensor ST lis2dh/lis2dh12
Support interrupt management for FIFO watermark
Starting to share common code with other devices
like lsm6dsm/lsm6dsl (acc/gyro) or new lis2mdl (mag)
TODO: Add all embedded functions support (click,
tap and so on)
BUG=none
BRANCH=master
TEST=Tested on discovery BOARD with sensor connected on
EC i2c master bus. Added motion sense task on discovery
board task list, added gpio info in board configuration
file and tested with motion sense console commands. Data
for acc seems ok: can successfully change ODR and
full scale range. Also FIFO and interrupt tested
Device tested is lis2dh (lis2dh12 simply differs for low
pin count but share the same registers)
Change-Id: I16abeac3f139a604094b38d8d8b857a62c93a242
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Reviewed-on: https://chromium-review.googlesource.com/412700
Commit-Ready: mario tesi <mario.tesi@st.com>
Tested-by: mario tesi <mario.tesi@st.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
