pwr_avg provides an average voltage, current, and power over the last
1 minute. It's up to the battery drivers to implement this
functionality.
This change allows us to have better power tracking while minimizing
the power impact on the EC, because
- the pwr_avg command only needs to be called once every minute, and is
short, thus less expensive to parse on ECs without a UART buffer
- the work done to keep the avg is partially done by the batteries
already and it's just a question of retrieving it.
undefined on wheatley since no power debugging planned on that board.
usage:
> pwr_avg
mv = 7153
ma = -605
mw = -4327
BUG=chromium:752320
BRANCH=None
TEST=make buildall -j
Change-Id: Id1a3479d277aedf90dfa965afb4ee9136654b1cf
Signed-off-by: Ruben Rodriguez Buchillon <coconutruben@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/823884
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
All boards have been transitioned to charge_state_v2.c
So charge_state_v1.c, HOOK_CHARGE_STATE_CHANGE, and
CONFIG_CHARGER_TIMEOUT_HOURS can be removed
BUG=chrome-os-partner:36272
TEST=make -j buildall
BRANCH=none
Change-Id: I3f20c5198ea75185f9894deb792575a1be31432a
Reviewed-on: https://chromium-review.googlesource.com/435467
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Added i2ctest console command to test the reliability of the I2C.
By reading/writing to the known registers this tests provides the
number of successful read and writes.
BUG=chrome-os-partner:57487
TEST=Enabled the i2ctest config on Reef and tested the
i2c read/writes.
BRANCH=none
Change-Id: I9e27ff96f2b85422933bc590d112a083990e2dfb
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/290427
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Currently the EC waits until it reads a battery status with the flag
STATUS_INITIALIZED set, but the EC does not use this flag for charging
or any other battery operation. If this flag is not set, it does not
mean that the battery is unusable, it just means that its values may not
be trustworthy.
This change will remove the check for STATUS_INITIALIZED and just check
that the battery responds. The battery response shows that the battery
is connected and can be used by the EC.
BRANCH=none
BUG=chromium:564893
TEST=see that device without STATUS_INITIALIZED set will exit
battery_wait_for_stable() without timing out.
Change-Id: I07778e8570b6d9400b61beec6b2e222984a40692
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/315200
Reviewed-by: Randall Spangler <rspangler@chromium.org>
ARM systems currently use SBS kernel driver which talks to the battery
through I2C passthu in the EC. Instead when asking for battery
information try getting it from the charge state machine first, and
then try the battery if charge state does not have the information.
This reduces latency by cutting out the battery response time.
BUG=chromium:484841
BRANCH=none
TEST=check that power_supply_info works properly on Jerry
Change-Id: If4da15ccabe412adc31fc94b189089ebb3e9265c
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/307905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This moves battfake console command to the battery driver.
This fixes a race condition with using the 'battfake' command
where charge_state_v2 could return the real battery percentage
even when a faked percentage is specified, if a higher priority
task uses the battery state of charge in between when the
battery is read, and when the fake state of charge overwrites
the battery parameter.
BUG=chrome-os-partner:45878
BRANCH=none
TEST=use tap for battery with a faked state of charge. the tap
for battery queries the battery percentage a lot, so without
this CL, the tap sequence often temporarily jumps to different
percentages and colors. with this CL, the tap sequence works
great.
Change-Id: I3ae0866d1ff7bb8d0c51355cd6b958310766f19e
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/302711
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
On samus battery, when the battery is dead it reports 0 for desired
voltage, current, and state of charge. In this case we should allow
charging.
Added a CONFIG option for this that should be removed as soon as
the battery side is fixed.
With this CL, when a dead samus battery is used and a charger is
connected, we attempt to charge it.
BUG=chrome-os-partner:29465
BRANCH=none
TEST=test on a samus with a dead battery. w/o this CL, the battery
never charges because the charging not allowed flag is set. With this
CL, the battery charges.
Change-Id: Ic61f27a27237166d33cb9ea5f024d3ef6360ce82
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/202603
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Some battery uses clock stretching feature, and this could disturb
PMU communication before battery going stable.
AP does not know and will attempt PMU setting, and could get fail
For various battery indicates usually 1s for stable
(even if it is much less in real world 200ms~700ms)
Let's checking 'battery is ready' when first pump-up power.
BRANCH=ToT
BUG=chrome-os-partner:28289
TEST=Going battery shipmode and plug-in AC, See booting and EC log
Disconnect battery, and plug-in and see booting and EC log
Change-Id: Idd8ae2ab4ec164b11fe67413bbf647cad18bc481
Signed-off-by: Wonjoon Lee <woojoo.lee@samsung.com>
Reviewed-on: https://chromium-review.googlesource.com/197990
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Add a shortcut in smart battery driver and i2c passthru. Once
the battery cut-off order is submitted (in the factory line),
the EC will no longer talk to battery.
BUG=chrome-os-partner:28248
BRANCH=tot,nyan
TEST=See below
> remove AC, cutoff: expect system is off.
> cutoff, then remove AC: expect system is off.
> cutoff, wait for 1 min, then remove AC: expect system is off.
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Change-Id: Ied963c19d17d581ce99e4543469cf2fa165f0439
Reviewed-on: https://chromium-review.googlesource.com/196657
Tested-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Yung-chieh Lo <yjlou@chromium.org>
This is a complete rewrite of the charge_state task used by x86 platforms.
Rather than having a bunch of state-specific functions, each with their own
error handling and special cases, this is organized like so:
Forever:
1. Read everything we can from the battery and charger.
2. Figure out what we'd like to do (including error handling).
3. Allow for customization to override that.
4. Do it.
Things I need to file bugs for are marked with "TODO(wfrichar)". I'll file
the bugs after this CL goes in, so that they'll have something relevant to
refer to.
BUG=chrome-os-partner:20881
BRANCH=ToT
TEST=manual
make buildall -j
Try it on Samus, watch it charge from nearly empty to full, both with and
without fastcharge enabled.
Also undefine CONFIG_BATTERY_PRESENT_CUSTOM, plug and unplug the battery to
be sure the trickle charging logic is correct when it can't tell if the
battery is present.
Change-Id: I3935cd3b87f322eb52178f8a675a886c16b75d58
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/191767
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds two battery parameters that need to be monitored constantly:
remaining_capacity and full_capacity (that one only changes occasionally,
but we have to notify the AP when it does).
It also adds the is_present field to indicate whether the battery is
physically present or not (when we can tell), so we know whether to try to
wake up a deep-discharged battery.
Along with that, we clean up the error flags to provide indication of which
fields were unable to be read, and replace the manual logical-or of all
errors as they were set with a bitmask (BATT_FLAG_BAD_ANY).
No functionality is changed, only new & better information is provided for
use in the upcoming cleanup of the charge state machine.
BUG=chrome-os-partner:20881
BRANCH=ToT
TEST=make buildall -j
All targets build; all tests pass.
Change-Id: I4312c2fdd3cf2dd9570718e90571eff796b269db
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/191917
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Smart batteries can report capacity in mAh or 10mW units. We forced
the units to mAh in charge_state.c's main loop, but that doesn't
guarantee that they're actually set before the capacity is read. It's
cleaner to check the capacity reporting mode when actually reading the
capacity.
BUG=chrome-os-partner:20881
BRANCH=none
TEST=battery command reports the same capacity data before/after change
(on rambi, design=2940 mAh)
Change-Id: I4a4c80eaade72bb09627d5d65693c097e264a992
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176154
The charge state machine asks for all of this stuff at the same time
anyway. Bundling it into a single function removes a number of
redundant (and painfully slow) I2C reads.
Also refactor the battery debug command so it doesn't have so many
local variables all in one function; it was consuming considerably
more stack space than any other debug command.
Spring still needs low-level access to the smart battery, so move the
two functions it needs directly into the Spring implementation.
BUG=chrome-os-partner:20881
BRANCH=none
TEST=charge/discharge rambi, pit and spring; watch debug messages and
LED and output of 'battery' debug command. All should behave the
same as before. Then run 'taskinfo' and see that the console task
has at least 20 bytes unused.
Change-Id: I951b569542e28bbbb58853d62b57b0aaaf183e3f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177797
The common/ subdir was getting cluttered. Move drivers for external
components to a new driver/ tree, and move what used to be called
chipset_*.c to a new power/ directory.
This does not move/rename header files or CONFIG options. That will
be done in subsequent steps, since moving and modifying .c files in
the same CL is harder to review.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I67a3003dc8564783a320335cf0e9620a21982d5e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173601
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
