Add generic PWM host commands for setting + getting duty cycle. PWMs can
be controlled through index (board-specific meaning) or by type
(currently KB backlight and display backlight are supported, more can be
added as needed).
BUG=chrome-os-partner:52002
BRANCH=None
TEST=Manual on chell.
`ectool pwmsetduty kb 100` - Verify KB backlight goes to 100%
`ectool pwmgetduty kb` - Prints 100
`ectool pwmgetduty 0` - Prints 100
`ectool pwmsetduty 0 0` - Verify KB backlight goes to 0%
`ectool pwmgetduty kb` - Prints 0
`ectool pwmgetduty disp` - Error res 3 (unsupported PWM type)
`ectool pwmsetduty 1` - Error res 3 (non-existent PWM index)
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I607c92a291e6c2e3af8238eaf22ad2bb81ffc805
Reviewed-on: https://chromium-review.googlesource.com/344012
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
This is keyboard test mechanism request for "multiple key press test",
we can thru the testing to scan out kso ksi pins shortting or keyboard has
multiple key pressing, below was the testing steps:
1. Turn off internal keyboard scan function.
2. Set all scan & sense pins to input and internal push up.
3. Set start one pin to output low.
4. check other pins status if any sense low level.
5. repeat step 3~4 for all keyboard KSO/KSI pins.
6. Turn on internal keyboard scan function.
BUG=chrome-os-partner:49235
BRANCH=ToT
TEST=manual
Short any KSO or KSI pins and excute "ectool kbfactorytest", it shows failed.
if no pins short together, it shows passed.
Change-Id: Id2c4310d45e892aebc6d2c0795db22eba5a30641
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/332322
Reviewed-by: Shawn N <shawnn@chromium.org>
`tempsinfo all` will probe all 24 sensor IDs, which will produce stderr
output due to host command failure if a given sensor does not exist.
Therefore, check memmap data for presence before probing a given ID.
BUG=chrome-os-partner:51026
BRANCH=None
TEST=Manual on Sentry. Verify "ectool tempsinfo all" dumps info on 4
temperature sensors and prints nothing to stderr.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I14d65c1ad03eafafc21db41781c434b3ed74cb7e
Reviewed-on: https://chromium-review.googlesource.com/333779
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
led_color_names[] should have EC_LED_COLOR_COUNT numbers of data.
A missing data cause strcasecmp() compare argv[] with NULL in
find_led_color_by_name(), that results in Bundle Image test error
BUG=chrome-os-partner:50612
BRANCH=lars
TEST=`make -j buildall`, `ectool led power blue=255` with homemade ectool.
Signed-off-by: Ryan Zhang <Ryan.Zhang@quantatw.com>
Change-Id: I2132775f9d4a074517f9a98b81919dd77bc86102
Reviewed-on: https://chromium-review.googlesource.com/330075
Commit-Ready: David Wu <david_wu@quantatw.com>
Tested-by: Ryan Zhang <Ryan.Zhang@quantatw.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
- ec_response_thermal_get_threshold.value is unsigned, so it can not be
less than zero.
- make power_button_wait_for_release() take a signed int, to match its
existing usage.
BUG=None
TEST=`make buildall -j`
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ie5748df3d9904d1e417adc38fee18f8cb3ce9750
Reviewed-on: https://chromium-review.googlesource.com/325840
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added new host command to support returning lid angle.
New output from ectool:
System with lid angle support:
------------------------------------------
localhost ~ # ectool motionsense lid_angle
Lid angle: 72
System without lid angle support:
------------------------------------------
localhost ~ # ectool motionsense lid_angle
EC result 3 (INVALID_PARAM)
BUG=none
BRANCH=none
TEST=run "ectool motionsense lid_angle"
verify the value matches the physical lid angle position
Change-Id: I4179172c778f643640561e819216f7adfee679d2
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/313345
Reviewed-by: Shawn N <shawnn@chromium.org>
Add support for two new configs to specify critical energy battery
percentage and critical external charger power. When we are under both
thresholds, set the LIMIT_POWER charger parameter to inform the AP that it
should conserve power to avoid brownout, and consider jumping to EC RW
to negotiate PD.
In addition, modify the existing CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON
to allow power-up regardless of power level if a 15W+ charger is
attached, since there is a reasonable chance it may speak PD and provide
sufficient power to boot the AP.
BUG=chromium:537269
TEST=Manual on Glados. Set CHG_MW thresh to 20000, BAT_PCT to 50. Verify
that LIMIT_POWER charger param is set until Zinger negotiates to 20V. Also
veify that system can boot with Donette.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ic963c82fea4ad10e8a5d7e476c5ce3e5ae525dad
Reviewed-on: https://chromium-review.googlesource.com/306774
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This commit adds the "hibdelay" command which will set the time before
the EC hibernates.
BUG=chrome-os-partner:45608
BUG=chrome-os-partner:44831
BRANCH=None
TEST=Build and flash samus EC with hibernation delay host command
added. Use ectool to set the hibernation delay and verify that the
hibernation delay was changed.
CQ-DEPEND=302197
Change-Id: I91141ee48a648c1052f0a3930a810ea4f551e0a4
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/302198
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Allow the host to enable/disable double tap.
Send event when double tap is present.
Also fix a bug when scanning for gestures.
BRANCH=smaug
BUG=chrome-os-partner:44754
TEST=compile. Check on Ryu.
Change-Id: I50d008cd3823072ab1c1e2d21f1276cd2185d797
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/298683
Add more flags to EC_CMD_USB_PD_CONTROL including whether
the port partner is PD capable, and if the port partner has
any of the following flags set in its capabilities: dual-role
power, dual-role data, USB comms capable, and externally
powered.
BUG=none
BRANCH=smaug
TEST=tested on samus using 'ectool --dev=1 usbpd 0'. Tested
with zinger, guppy, another samus, and other third party
devices to verify the flags are set as advertised in src/snk
capabilities packet
Change-Id: I4d78d1880073fdacce57516111ac6cab37b93f27
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300953
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add an interface with the host to set up gesture recognition.
Today, only significant motion is supported.
Add a virtual sensor for concentrating gesture support from host.
BRANCH=smaug
BUG=b:23570481
TEST=On ryu, enable significant motion from host.
Change-Id: I906fa2d2d7b4ca2771ea2f58b91de8d97bf4e2e3
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/296213
Add all swap commands to USB_PD_CONTROL host command: data,
power, and vconn swap.
BUG=none
BRANCH=smaug
TEST=tested on both samus and ryu while connected to each other.
Change-Id: I280a0da2d3c5a5436243134ab3f2ec353ebf6ab8
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/299290
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
PD charger voltage + current can now be limited with
EC_CMD_EXTERNAL_POWER_LIMIT. The limit is automatically cleared when the
AP transitions out of S0 into S3 / suspend.
BUG=chrome-os-partner:43285
TEST=Manual on Samus w/ zinger.
- Plug zinger, verify charging at 20V/3A.
- `ectool extpwrlimit 3000 12000 --dev=1`, verify charging at 12V/3A
- `ectool extpwrlimit 1000 5000 --dev=1`, verify charging at 5V/1A
- Plug zinger into other port, verify still charging at 5V/1A
- `powerd_dbus_suspend`, verify charging at 20V/3A
- `chglim 2000 12000`, verify charging at 12V/2A
- `ectool extpwrlimit 0xffff 0xffff --dev=1`, verify charging at 20V/3A
- `chglim 1000 20000`, verify charging at 20V/1A
- `chglim`, verify charging at 20V/3A
BRANCH=ryu
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6cd5377be91b3df75f99cb414fd3fa5a463b56cb
Reviewed-on: https://chromium-review.googlesource.com/293954
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
To ease driver loading in the kernel, add a bit in the feature field
to indicate the EC has an internal software FIFO for sensor events.
BRANCH=smaug
BUG=chrome-os-partner:39900
TEST=compile, kernel modules load as expected on Smaug.
Change-Id: I1ae0b9ebb587bb4939745e8a0e16d73d95ba31d7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/285774
Reviewed-by: Alec Berg <alecaberg@chromium.org>
When FIFO overfills, keep track of the number of lost vectors per
vector types. This way, when we calculate timestamps in user space,
we can evaluate the number of empty slots to skip per vector type.
This is important when different types are samples at very different
frequencies.
BRANCH=smaug
TEST=Check that when we drop events, the timestamp are better than
without.
BUG=chrome-os-partner:39900
Change-Id: Ib9cb994ada38373e5a49dd4ba2123ca7534a169e
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284615
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Was comparting a int16_t with 0x8000 leading to:
error: comparison of constant 32768 with expression of
ec-utils-0.0.1-r2377: type 'int16_t' (aka 'short') is always false
(Builder: Chromium OS (x86) Asan (stats) 7005)
BRANCH=smaug
TEST=On Smaug check that ectool does report invalid temperature
when EC returns 0x8000.
Check the temperature is correct when the EC returns a valid
temperature.
BUG=chromium:508674
Change-Id: I2a1414cf7bf018ecaa7ff8dd37c76804de4bce52
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284673
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Achuith Bhandarkar <achuith@chromium.org>
Move calibration in the EC to returns raw value with offset already
applied, as recommended by iio interface.
BRANCH=smaug
TEST=On Samus, with kernel change CL:283103
Check raw value are returned properly.
BUG=chromium:506101
Change-Id: I3dcb4f2fcfff35639e3bfdcc6c1468bdb5e53c45
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/283161
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add command to read the sensors events FIFO from the AP:
FIFO_INFO: get information on the FIFO state
FIFO_READ: read and update the consumer pointer
FIFO_FLUSH: insert a flush meta event and force a interrupt.
A new MKBP event is added to tell the host the FIFO needs processing.
BRANCH=smaug
TEST=Test on ryu
BUG=chrome-os-partner:39900
Change-Id: I11c0cf8cdc3087eb9e323f7d6780e6cf3a16257f
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276264
Reviewed-by: Randall Spangler <rspangler@chromium.org>
MOTIONSENSE_CMD_DATA return the value of a sinlge sensor.
BRANCH=none
BUG=chrome-os-partner:39900
TEST=On Smaug, using the new cros-ec-sensors driver,
check sensors data using iio sysfs interface.
Change-Id: I618ff050e0c7b4247ac56cfb0ca25e351270e1d6
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/274824
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add command that list supported features by the firmware.
Also let the firmware indicates if more features are expected in the RW
version.
This will help the cros_ec framework load the right driver(s) for
exposing information via sysfs.
BUG=chromium:428364
BRANCH=none
TEST=Test on samus on both ec and pd:
localhost ~ # ectool inventory
EC supported features:
1 : Flash support
2 : Direct Fan power management support
3 : Keyboard backlight support
4 : Lightbar support
6 : Motion Sensors support
7 : Keyboard support
9 : BIOS Port 80h access support
10 : Thermal management support
11 : Switch backlight on/off support
12 : Switch wifi on/off support
13 : Host event support
14 : GPIO support
15 : I2C master support
16 : Charger support
17 : Simple Battery support
18 : Smart Battery support
21 : Control downstream MCU support
localhost ~ # ectool --name cros_pd inventory
EC supported features:
1 : Flash support
14 : GPIO support
15 : I2C master support
22 : USB Cros Power Delievery support
Change-Id: Ib6eaac91fda86835e754c5316ecf81fbc27786e5
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/263463
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Change the EC_CMD_USB_PD_POWER_INFO host command to report the input
current limit and the max current theoretically possible given the
charger. The input current limit field is useful for logging purposes
and the max current field is useful to give to powerd to determine
if we have a low power charger connected.
The max current is determined by checking if the charge supplier is
allowed to ramp. If the charge supplier is allowed to ramp and has
not completed ramping yet, then max current is the max current that
we are allowed to ramp up to. Once the ramp has completed, then max
current is the stable charging current. If the charge supplier is not
allowed to ramp, then max current is simply the max current as
registered with charge_manager. The point here is to keep the max as
high as possible until we know for sure it is lower to avoid showing
the user the low power notification until we know for sure.
This CL also adds a new charger type, USB_CHG_TYPE_UNKNOWN. For a short
period after a charger is plugged in, the supplier type may change and
PD negotiation is still in process, and therefore we tell the host we
have an unknown charger type. This allows powerd to show the charging
icon, but delay determining if this is a low power charger until we
know for sure.
BUG=chrome-os-partner:38548
BRANCH=samus
TEST=tested with zinger, a DCP, an SDP, and a proprietary charger.
tested that low power notification never pops up with zinger, even
if you purposely wedge charge circuit with "charger voltage 7000" on
EC console. tested that the other chargers all pop up low power
notification once the supplier changes from UNKNOWN to the real
supplier. used "ectool --name=cros_pd usbpdpower" to check current
values.
Change-Id: If8a9a1799504cc2a13238f4e6ec917d25d972b22
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/265066
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Export what the PD protocol stack thinks about the port connection
state. This simplifies getting a meaningful data role/power role from the
host (eg we are not really a UFP if we are simply dual-role toggling but
not connected).
Do not increment the command version as this is mostly
backward-compatible and currently no client actually uses that field.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=ectool --name=cros_pd usbpd 0
plug and unplug various accessories on the port and check the result.
Change-Id: Ief3e0d47b6a288bcfc5b8fbb8156f29fd09dd336
Reviewed-on: https://chromium-review.googlesource.com/266120
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Rather than hardcode a specific mips toolchain, do a build-time test to
see if the target is x86 based.
BUG=chromium:443783
TEST=link still includes comm-lpc
TEST=arm64 omits comm-lpc
BRANCH=none
Change-Id: I0253df6cbe89bee231ec643dd6bb3498eb040708
Reviewed-on: https://chromium-review.googlesource.com/265793
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Commit-Queue: Mike Frysinger <vapier@chromium.org>
Tested-by: Mike Frysinger <vapier@chromium.org>
The 'lightbar params' v1 command has a parameter list that exceeds 120 bytes,
which will not work over i2c. Therefore, I created a params v2 command which
breaks up the existing parameters into logical groups which are less than 120
bytes.
TEST=Tested new lightbar params2 command and ran get/sets on all groups for
samus. Repeated test on ryu as well.
BUG=chromium:467716
BRANCH=none
Change-Id: If0fa92e9a2f373b20257f8ce7eb66b7836d9ac60
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263106
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add a new supplier type for VBUS chargers (USB chargers which supply VBUS
but are not identified as another charger type).
BUG=chrome-os-partner:37168
TEST=Manual on Samus with subsequent kernel commit. Modify code to
reject all non-VBUS suppliers, charge with SDP port, and verify charge
icon appears in OS.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I5fbdb1cb57bd0224b01aaf5a763f93b678b6d204
Reviewed-on: https://chromium-review.googlesource.com/254346
Reviewed-by: Alec Berg <alecaberg@chromium.org>
When we find that charging is in a wedged state, we may wish to write a
PD log entry, but the PD MCU cannot detect such a state on its own.
Therefore, add a new command to ask the PD MCU to write a log of a given
type, and add a new board-specific custom log event.
BUG=chrome-os-partner:36668
TEST=Manual on samus:
./ectool --dev=1 pdwritelog charge 0
./ectool --dev=1 pdwritelog charge 1
./ectool --dev=1 pdwritelog 1 0
./ectool --dev=1 pdwritelog 2 0
./ectool --dev=1 pdlog
Verify log output matches expectation:
2015-02-12 11:12:49.290 P0 SRC
2015-02-12 11:12:49.296 P1 SNK Charger PD 20286mV max 20000mV / 3000mA
2015-02-12 11:12:49.303 P0 New connection
2015-02-12 11:12:49.310 P0 Board-custom event
--- END OF LOG --
Also, verify kernel logging of wedged event:
[ 181.378420] PDLOG 2015/02/12 19:13:44.019 P0 Event 02 (0000) []
Also, trigger wedged state on Samus and verify log entry is written.
BRANCH=Samus
Change-Id: I55c7c839cf8300fcd3931dccdaaf16c1065e31a8
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/248981
Reviewed-by: Alec Berg <alecaberg@chromium.org>
mcdp_info is a logging payload, so related structures need to be moved
to the public include file.
BUG=chrome-os-partner:35935
TEST=make buildall -j
BRANCH=Samus
Change-Id: Idb939db884821fa85faafbfe643e713f5bcdbc59
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/244780
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Current simplified implementation allows single mode entry. Specification
allows multiple mode entry and its advantageous for things like flashing RW
while staying in DisplayPort mode on video dongles.
CL adds capability on DFP to track as many alternate modes as supported by the
DFP. Initial mode entered is still the default supported mode ( 1st entry, 1st
opos). Policy manager can then use host command, EC_CMD_USB_PD_SET_AMODE, to
enter additional supported modes.
On the UFP (hoho, dingdong) a small modification to track multiple svid mode
entries was made.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33946
TEST=manual, On hoho
1. Still successfully enter default mode DP
2. Using ectool's pdsetmode can successfully enter/exit multiple modes.
For example,
# port:1 svid:18d1 opos:1 cmd:1==enter
ectool --name cros_pd pdsetmode 1 0x18d1 1 1
Checking with pdgetmode shows both modes entered.
3. Works across hard & soft resets
4. Can flash via ectool --name cros_pd flashpd 4 <port> <RW image>
5. Still drives external display. With bootarg drm.debug=0x6 and following
command: 'tail -f /var/log/messages | grep "Received HPD" &'
I see HPD assert & deassert when switching between GFU and DP mode.
If both modes entered screen stays lit (after reboot) during write.
Change-Id: I7a21ebea377402eb1b0a0cf1d29df59694e301b1
Reviewed-on: https://chromium-review.googlesource.com/241790
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Renaming this to 'opos' for consistency with USP-PD specifications
'object position' in VDM header.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35495
TEST=manual, On hoho
1. Still successfully enter default mode DP
2. Using ectool's pdgetmode pdsetmode can successfully enter/exit
other modes
3. Works across hard & soft resets
Change-Id: I08cb8e003ced4de481adcb503bcba3437ebb1ab7
Reviewed-on: https://chromium-review.googlesource.com/241718
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Use one line per entry and display the real time for the events.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33248
TEST=ectool --name=cros_pd pdlog
and see a nice log like:
2015-01-20 15:14:02.974 P0 Disconnected
2015-01-20 15:14:05.676 P0 SNK Charger Type-C 4958mV max 5000mV / 500mA
2015-01-20 15:14:11.810 P1 SRC
2015-01-20 15:14:14.460 P0 Disconnected
2015-01-20 15:14:17.277 P0 SNK Charger Type-C 5185mV max 5000mV / 3000mA
2015-01-20 15:14:17.287 P0 SNK Charger PD 5015mV max 20000mV / 3000mA
2015-01-20 15:14:17.383 P0 SNK Charger PD 20198mV max 20000mV / 3000mA
--- END OF LOG ---
Change-Id: Ibf189cdb9e5d9ba74cb1fb241a2945439dfb50f7
Reviewed-on: https://chromium-review.googlesource.com/242082
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
For dual-role USB ports (host/device), let the AP know whether we are
currently DFP (USB host) or UFP (USB device) by exporting the data role
in addition to the power role in the EC_CMD_USB_PD_CONTROL response.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=ectool --name=cros_pd usbpd 0
plug various accessories on the port and see properly "SRC DFP" for the
USB key, "SNK DFP" for the power supply and "SNK UFP" for a regular
C-to-A charging cable.
Change-Id: I292da15fa8cf3566109dd05995ef1d00bed6f92d
Reviewed-on: https://chromium-review.googlesource.com/242012
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Flashing PD devices works through ectool but only when device has
already entered GFU alternate mode. This CL adds ability to force
that entry for devices with default policy engine does not already do
that.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33947
TEST=manual,
1. On hoho flash RW successfully
ectool --name cros_pd flashpd 4 1 hoho.ec.RW.bin
Change-Id: Idd320cf91644f0c1bff87767ab20049d86aa86c6
Reviewed-on: https://chromium-review.googlesource.com/236959
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Add the charging events to the PD event log FIFO
and add an ectool to retrieve/decode them.
BUG=chrome-os-partner:33248
TEST=Manual on Samus. Run `ectool --name cros_pd pdlog`, verify that
all log entries are dumped and the content matches expectation.
BRANCH=Samus
Change-Id: I65dd5696cc0487856ab42aff24134bcdfa1a8219
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238093
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
MIPS host CPU does not access IO registers using a separate address space.
Remove for support of LPC for this host architecture.
Confine x86 function to Intel Architecture only.
BRANCH=none
TEST=Compile: Test on ARM, MIPS and X86: using emerge... ec-utils.
BUG=chromium:443783
Change-Id: I9d4276ec3588037adfcff96e596bbe8be74f22fd
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236687
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If the EC controls the lightbar and sets the sequence when
it notices the chipset transitioning between states, we can't
make exceptions for cases where we don't want to activate the
lightbar, such as in dark resume. Instead, let's make it a
separate command that we expect from the kernel.
BUG=chrome-os-partner:32181
TEST=build on samus, verify lightbar does correct thing with
manual control set
BRANCH=ToT
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Change-Id: I5dc619cbbf2498e2ef03ce622831b33e14c7c495
Reviewed-on: https://chromium-review.googlesource.com/239215
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
With CL:
5ef45ad pd: Add timeout for HC flash commands.
I thought I'd licked the timeout related issues with flashing dingdong
& hoho.
With further testing however I found I was occassionally hitting the
failure where I couldn't return from 'flash erase' on PD peripheral
prior to the 1 second limit for host command timeout.
That could be remedied by retrying the erase on the host side which
then succeeds quickly. That solution seems non-optimal however.
Additionally, even when erase does succeed in <1sec we have the shared
i2c bus pending. That too is non-optimal.
For those reasons I've decide to return immediately from flash erase
command and instead put the burden of waiting the necessary time on
the host which at least does have some wider perspective on what the
system is attached to and doing.
CL also adds following related changes:
1. corresponding ectool edit to delay 3sec after RW erase.
2. fixup to error returns from hc_remote_flash for timeouts.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33947
TEST=flashing dingdong/hoho via ectool works reliably.
Change-Id: I8fbfb592f760273b26bcb16b67210d569454eee2
Reviewed-on: https://chromium-review.googlesource.com/239253
Trybot-Ready: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Currently, 'ectool usbpd' shows PD task state in numerical format. Every
time we add/remove a state, the number changes, and this makes the
command difficult to use. Modify the command to print the name of the PD
task state.
BRANCH=Samus,Ryu
BUG=chrome-os-partner:34296
TEST=Run 'ectool usbpd 0' with different combination of new/old PD
firmware and new/old ectool.
Change-Id: Ic0daa03e9f7565c1322166713c2cce3b7cb93a30
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/237623
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
- Correctly identify certain source ports (ex. c-plug to empty a-receptacle)
- Correct ectool power unit print (mV * mA != mW).
BUG=chrome-os-partner:33248
TEST=Manual on Samus. Connect c-plug to empty a-receptacle, run
"ectool --name usbpdpower", verify that port power role is identified
as source. Also, verify that 5000 mV @ 500mA port correctly prints
2500mW total power.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Icf0850afc570a1056578df9f1a647079a00229b3
Reviewed-on: https://chromium-review.googlesource.com/238235
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
This addition allows the AP to query whether the PD device is currently
running from RO or RW FW.
BUG=chrome-os-partner:34599
TEST=Manual on Samus. Run 'ectool --name cros_pd infopddev 0' and verify
that correct RO/RW status of Zinger is printed. Verify that the output
matches the index printed by "pd 1 hash" on samus_pd console.
BRANCH=Samus
Change-Id: I4266cae931f5c7855ca0531717c4a18b138b2d62
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236771
Reviewed-by: Alec Berg <alecaberg@chromium.org>
