Sometimes the toolchain tries to put a relocation which is not suitable
to access variables in a read-only section.
The nds32 gcc uses GP-relative signed 17-bit relocation to access
variables stored in .rodata (eg lwi.gp $r0, [ +gp ])
That's wrong since $gp is pointing in the middle of .data and .bss in
the SRAM, while .rodata is sitting in flash.
Since on IT8380, the flash is at 0x00000 and the SRAM is at 0x80000
(512kB further), the linker will fail trying to create the signed 17-bit
relocation (it detect that it needs to truncate it)
Force the compiler to put another relocation as a workaround for now.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:24378
TEST=./util/make_all.sh ; make BOARD=it8380dev
check "version" and "gpioget" on spring, link and it8380dev.
Change-Id: Ife50adf3a26be28f113292f73a1a70e8d74b5d8c
Reviewed-on: https://chromium-review.googlesource.com/176913
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
This is the initial commit of mec1322 support. This includes:
- Basic GPIO driver. Interrupt not supported yet.
- Microsecond timer
- UART driver
The script to pack the firmware binary will be checked in in
following-up CL.
BUG=chrome-os-partner:24107
TEST=Build and boot on eval board
BRANCH=None
Change-Id: I9013c908049d1f740f84bb56abca51b779f39eef
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175716
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is tidier than every board defining its own module_id enum, and
encourages standard naming of modules.
A subsequent CL will do more cleanup (standardizing on MODULE_LED
instead of MODULE_POWER_LED and MODULE_LED_KIRBY), but it's easier to
do that as a separate CL than part of this one.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: If0fcef284fb3aa2fa145bc9ff3d1f3f2d25a2e47
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174382
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This just replaces all the "X - 273", "Y + 273" stuff with a macro.
BUG=none
BRANCH=falco,peppy
TEST=manual
Run the EC console command "temps". It should print human-readable things.
Change-Id: Icc4284c89fdbc0cd3b206a0faacf121973652a63
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65005
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This fixes unaligned access exceptions when totally-unrelated code
changes happen to move around host_command.c's global variables.
BUG=chrome-os-partner:21578
BRANCH=none
TEST=add a ccprintf() call to host_command.c; no longer causes an exception
Change-Id: I5407e5631a08ea647dc40e5bd9c7bd101868ced0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64233
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
To create a token by concatenating already-defined macros and new
text, it's necessary to use multiple levels of macro. We'd already
done that in several places in the code such as STM32_CAT; this now
standardizes it into a single place.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=Build all platforms; examine ec.RO.map to see that irq_*_handler and prio_* symbols
evaluated the same as before. (Other macro evaluations would simply fail to compile
if they were incorrect, since the concatenated tokens wouldn't fully expand.)
Change-Id: Ic9bf11d27881a84507fe7b6096dab6217c6c6dc7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63231
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This file will soon contain the exhaustive list of all CONFIG defines
and their descriptions.
Chip-level configs are renamed to config_chip.h to avoid naming
conflicts.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I9e94146f5b4c016894bd3ae3d371c4b9f3f69afe
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62122
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
And use them for LM4 as well as STM32. Consistency is good.
No functional changes, just moving/renaming code.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I029a21fadb50726500255219dc38615874a369e7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47700
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This removes the need for a separate method to check sensor power, and
gets rid of temp_sensor.c knowledge of what powers each sensor.
BUG=chrome-os-partner:15174
BRANCH=link
TEST=manual
- reboot
- within a second, type 'temps'; I2C sensors should return error 1
- type 'temps' again; all sensors should return data
- power off system
- type 'temps' again; I2C sensors and PECI should return error 8
- 'gpioset enable_vs 1'
- type 'temps' again; I2C sensors should return valid data; PECI should still
return error 8.
Change-Id: I17c353b3c483bc320769307c7715008ec729089b
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/35287
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This ensures they get included everywhere, and fixes a common bug
where we forget one of them and then code which is supposed to be
BUG=none
TEST=build the code
Change-Id: Ic9208f946a3aea4b0b08f546f1919602befa76d4
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26365
This returns true when both HW and SW write protect are enabled.
Once WP is enabled, sysjump will be locked out.
system_is_locked() can be used to gate other dangerous-ish commands too.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7468
TEST=manual
sysinfo -> unlocked, copy A
sysjump B -> works
flashwp lock
reboot
(make sure flashinfo shows WP asserted and flash locked; note there is a
HW bug on proto1 which makes this flaky)
sysinfo -> locked, copy A
sysjump B -> fails
(remove WP screw)
reboot hard
flashwp unlock
Change-Id: I849b573675c2c1cb4c44b9a05d6973e38247ca23
Additional help messages and usage are gated by
CONFIG_CONSOLE_CMDHELP, so we can turn it on if there's space (adds
about 3KB to image size) and turn it off when there isn't.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=manual
1) help
2) help list
3) help gpioset
4) gpioset -> wrong number of params
5) gpioset fred 0 -> param1 bad
6) gpioset cpu_prochot fred -> param2 bad
Change-Id: Ibe99f37212020f763ebe65a068e6aa83a809a370
Note that this is a big security hole and should be removed after we
complete the EC autoupdate mechanism and vboot code.
To full update EC firmware on proto 1.0, we need a manual way to switch
EC running on RO/RW. This CL implements the LPC command.
BUG=chrome-os-partner:8415
TEST=on proto 0.5.
ectool reboot_ec RW_A # EC boots to RW A
ectool reboot_ec RO # EC boots to RO
Change-Id: Ibf050328bc4e3d2c6d72bfc478d6334f11f0eb46
