This is necessary to support SCI/SMI events.
Note that this breaks compatibility with previous ectool builds - and
probably also breaks flashrom support.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8253
TEST='ectool hello' and 'ectool flashinfo' still work
and 'ectool usbchargemode 3 1' fails with error 2
Change-Id: If39e5b6e7cdcec1b5ec765594e8492925b430b10
We now read temp sensor readings using the EC mapped space.
So we don't need this command.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8239
TEST="ectool temps 0" works.
Change-Id: I47f425e45cea992b19734f39ac6d9f6db6433d39
Add a LPC command to control USB charging mode. Also add the command to
ectool.
BUG=chrome-os-partner:7476
TEST=Manually test on link proto-0.
Change-Id: Ica87d0a690bc86e28844bd695f31641398b21939
Signed-off-by: Vic Yang <victoryang@chromium.org>
Instead of using a runtime callback to register the console commands,
put them in a special linker section. So we can do a macro to "register"
them during the build.
It saves 684 bytes and a few microseconds at startup.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=run a few commands from the BDS command line.
Change-Id: Id33ea210b9035bf76ed720373c74c5dd24ccd1b1
Add LPC host command to get and set fan speed.
BUG=chrome-os-partner:7313
TEST=Connect a fan and manually test fan actual speed matches target
speed.
Change-Id: I4b6a711a1b8cca0dbd1c1936fe4f0f15240d3453
Add a LPC host command to read temperature sensor value with given
sensor id.
Add ectool command to read temperature sensor value through LPC.
BUG=chrome-os-partner:7329
TEST=Manual check the reading received is the same as value printed by
console command.
Change-Id: Id3386774435be6c3ae010a143f4fa894568efdb8
The LPC is not stable enough to test. Kodus Rong. He creates this idea
to checksum the partial content of flash for read/write/erase. This can
improve the robustness of flashrom.
BUG=none
TEST=Tested with flashrom.
Change-Id: I2a2f7b698a94674c03cbd8e3f15caf34f8986399
This CL add host command to enable, get/set flash write protect range.
BUG=None
TEST=Use flashrom utility to set write protect range, enable write
protect and get status.
Change-Id: I345f1eb65944d8cf8028e6fdb7e43c40cc742a6d
Signed-off-by: Rong Chang <rongchang@chromium.org>
