We need to know not only whether the HW WP pin is asserted, but whether the
flash chip has configured its software protection registers to actually
protect anything. This flag can be used to indicate that.
BUG=chrome-os-partner:13265
BRANCH=link
TEST=none
This just adds the flag. Nothing actually sets the flag yet, so there's
nothing to test.
Change-Id: Icba9945fb56eb3a4681486c630cbbdc9232485ef
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/31642
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Some EC's are slow to program their firmware. This could happen at any boot
as part of software sync. This adds the VB_INIT_FLAG_EC_SLOW_UPDATE input
flag to VbInit(), so that vboot knows to display the EC-is-being-programmed
screen when that flag is set.
BUG=chrome-os-partner:12255
TEST=none
This isn't activated yet by anything, so there's nothing to test.
Change-Id: Id4d12e463fcdee017b7c52b53a2facefc33b745f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/29370
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is more reliable than reading them through FDT/ACPI, since it reflects
the positions as shown to verified boot code.
Notes:
1. This affects ALL platforms with virtual dev switches (x86 AND arm)
2. The fix should have no effect on older platforms, but I haven't tested those.
BUG=chrome-os-partner:11805
TEST=manual
1. boot in normal mode.
devsw_boot = 0 # Developer switch position at boot
recovery_reason = 0 # Recovery mode reason for current boot
recoverysw_boot = 0 # Recovery switch position at boot
wpsw_boot = 1 # Firmware write protect hardware switch position at boot
2. boot in developer mode.
localhost ~ # crossystem
devsw_boot = 1 # Developer switch position at boot
recovery_reason = 0 # Recovery mode reason for current boot
recoverysw_boot = 0 # Recovery switch position at boot
wpsw_boot = 1 # Firmware write protect hardware switch position at boot
3. boot in developer-recovery mode using keyboard combo.
devsw_boot = 1 # Developer switch position at boot
recovery_reason = 2 # Recovery mode reason for current boot
recoverysw_boot = 1 # Recovery switch position at boot
wpsw_boot = 1 # Firmware write protect hardware switch position at boot
4. disable WP and reboot. wpsw_boot should be 0.
Change-Id: If4156b5e14c6923c5b331c7e5feaabbffe1dad37
Reviewed-on: https://gerrit.chromium.org/gerrit/29199
Commit-Ready: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Doesn't check the EC hash, but does jump to the correct image, for now
assuming the hash is good.
BUG=chrome-os-partner:11087
TEST=manual
- Power+refresh. System boots. EC is in RO (verify via 'ectool version')
- Create a BIOS signed *without* RO-normal.
- Power+refresh. System boots. EC ends up in A.
- ectool eventgetb. Event 0x2000 IS present, indicating EC has rebooted
- ectool eventclearb -1
- Power button to shut down, then power button to power back on.
- ectool eventgetb. Event 0x2000 is NOT present.
- crossystem recovery_request=123 && reboot. System reboots to recovery mode
and EC is in read-only (verify via EC console 'sysinfo')
- Power off and on. System boots. EC ends up in A again.
Change-Id: I39682d1bf7215c62a4b20613d029e78194b98826
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27574
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
On some systems, we require the VGA option ROM to be loaded before VbInit()
is called so we can display BIOS screens. If that hasn't happened, we
request it and reboot. Alternatively, if we don't need the option ROM
(normal mode) but we've already loaded it, we un-request it and reboot just
in case there are security vulnerabilities that might be exposed.
Not all systems need preloaded option ROMs. There is an additional input
flag that indicates whether this matters or not.
BUG=chrome-os-partner:8789
TEST=manual
Using keyboard-based dev-mode, switch between normal and dev mode and back.
It should work as expected.
Change-Id: Id1d662014d47ab648c73db4b1647520801f3a0b8
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27125
Reviewed-by: Randall Spangler <rspangler@chromium.org>
For fastest boot, we don't want to load the VGA Option ROM every time, but
only when we need it. Coreboot does that loading, but it can't always know
when it's needed (with keyboard-based dev-mode, coreboot can't tell if we're
in dev-mode or not). By the time we get to U-Boot, it's too late, so we need
two extra bits - one for vboot to tell coreboot to load the Option ROM and
another for coreboot to let vboot know it's been done.
BUG=chrome-os-partner:8789
TEST=manual
The only visible change is that crossystem will now have an "oprom_needed"
flag that can be set or cleared. Nothing actually pays attention to it yet,
though.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I521a6afdfb8ea17a8148b32eeb858844c981de9c
Reviewed-on: https://gerrit.chromium.org/gerrit/26272
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9706
TEST=manual
Currently, Link is the only platform that enables this feature.
To enter dev-mode:
Boot into recovery mode using the magic key chord. At the Insert screen,
press Ctrl-D. You'll be asked if you want to enter developer mode. If you
then press ENTER, it will reboot with dev-mode enabled. If you press SPACE
or ESC, it will return to the Insert screen.
If you enter recovery mode through any other means, or if dev-mode is
already enabled, pressing Ctrl-D at the Insert screen will have no effect.
To return to normal mode:
Reboot. At the Dev screen, press ENTER or SPACE. It will reboot to
recovery mode and ask you if you want to return to normal mode. If you
press ESC or power off, you'll still be in dev-mode. Press ENTER or SPACE,
and it will reboot into normal mode (of course, if you've messed up your
images while in dev-mode, you'll just come right back to recovery mode
again).
You can also request a direct return to normal mode by running
crossystem disable_dev_request=1
and rebooting.
Change-Id: I435905855a6c39932ee466cc046bdc4c4c860f98
Reviewed-on: https://gerrit.chromium.org/gerrit/24160
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
This just adds the vbutil_ec tool (and a simple test of the library
functions related to it).
BUG=chrome-os-partner:7459, chromium-os:27142
TEST=manual
make
make runtests
Change-Id: I2a2c4e7cfb8ac6ce2229c5de4252a5cc89321fa5
Reviewed-on: https://gerrit.chromium.org/gerrit/21868
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Omit this check because this check is not really necessary and it is
dealing more harms than goods to ARM boards.
While body load address is configurable, it is not quite possible to fix
all the build scripts and runtime scripts to carry this address; so in
reality all scripts use the default body load address.
The problem is, this default address is not friendly to ARM boards, and
it virtually makes this check fails on ARM boards.
BUG=chromium-os:28077
TEST=emerge-{daisy,x86-alex} vboot_reference
TEST=load_kernel_test -b 1 chromiumos_image.bin
TEST=run verified boot on Daisy
Change-Id: I1a1cc0aedf254e2a2b680046812ab7154f26dea7
Reviewed-on: https://gerrit.chromium.org/gerrit/20947
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Ready: Che-Liang Chiou <clchiou@chromium.org>
Although we're now using a single unified BIOS, it is pretty nice to be able
to get a shell in developer mode while still using verified boot for the
kernel and filesystem. Alex & ZGB implemented this by requiring the dev-mode
user to install a special dev-mode BIOS. We don't do that, but we DO require
setting a special flag with "crossystem" to accomplish the same thing.
In order to allow booting a self-signed kernel, you must boot in developer
mode, open a shell, and run this:
crossystem dev_boot_custom=1
Special note to internal developers: If you're in the habit (as I am) of
booting directly from a USB stick in dev-mode, you'll have to run this:
crossystem dev_boot_custom=1 dev_boot_usb=1
Just using dev_boot_usb=1 is no longer enough, because the USB kernel is
signed using the recovery key and by pressing Ctrl-U, we validate it with
the kernel data key. That worked before this change because any self-signed
kernel was fine, and that's how the USB key was treated. Now it actually
requires a verified signature until you enable dev_boot_custom=1 also.
BUG=chrome-os-partner:5954
TEST=manual
Boot once in normal mode, which clears the special flags. Then switch to
developer mode. You should be able to boot and get a root shell.
Run
crossystem dev_boot_usb=1
Obtain a USB recovery image that's keyed differently. For example, if you're
testing with dev-keys, use a PVT-signed image or vice-versa.
Reboot into dev-mode with the USB recovery stick inserted. At the dev-mode
screen, press Ctrl-U. You should hear a single beep, but it should not boot.
Press Ctrl-D to boot from the hard drive, log in to a shell and run
crossystem dev_boot_custom=1
Repeat the previous test. This time when you press Ctrl-U, it should boot
the recovery image. Turn the system off before it does anything.
That's it.
Change-Id: I1811ee9a188974b3f94c83c52b00b60028b86c69
Reviewed-on: https://gerrit.chromium.org/gerrit/11442
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add recovery reason for already in recovery and need to reboot to
recovery to let the TPM init.
Add vboot_struct fields.
Fix type for keyblock flags param to SetTPMBootModeState().
BUG=none
TEST=make && make runtests
Change-Id: I4035bdb377aaebaca03a43799be57977166da739
Reviewed-on: http://gerrit.chromium.org/gerrit/4599
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
The old (v2.0) parser is compatible with new (v2.1) structs. That is,
this won't break existing firmware or vbutil_firmware.
A new (v2.1) parser parsing an old (v2.0) struct will return 0 for the
flags.
This will be used to support the RO-normal code path in a subsequent CL.
BUG=chromium-os:17304
TEST=added unit tests; make && make runtests
Change-Id: I73bcd8acd3330b0d7d143061b5ef838e6d79cf1a
Reviewed-on: http://gerrit.chromium.org/gerrit/4030
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Pressing Tab at a firmware screen now displays real data, including
the recovery reason, HWID, and contents of VbNvStorage.
Entry point start/end time tracking in VbSharedData now refers to the
new wrapper APIs.
Added capability for calling firmware to request recovery mode (for
example, if it's unable to initialize RAM, can't find the SSD, etc.).
Previously, calling firmware had no (good) way to do this other than
faking the recovery button being pressed.
BUG=chromium-os:17018
TEST=emerge on x86 and tegra2_seaboard
Change-Id: I7d377f279842b30a10d945d13571c41c464633f1
Reviewed-on: http://gerrit.chromium.org/gerrit/3814
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Header file changes for wrapper API implementation
Crossystem support for reading recovery reason from VbSharedData, and
explicit support for version 1 VbSharedData structs.
BUG=chromium-os:16970
TEST=make && make runtests; run crossystem on Alex and make sure it still reports recovery_reason in recovery mode.
Change-Id: I15195b899583e425d3c9e8df09842d764528e2cb
Reviewed-on: http://gerrit.chromium.org/gerrit/3203
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
R=reinauer@chromium.org
BUG=chrome-os-partner:2578
TEST=manual
crossystem vdat_timers
should show 'LFS=0,0 LF=number1,number2 LK=number3,number4'
where number1 < number2 < number3 < number4
crossystem vdat_lfdebug
run from a dev mode console, should show
'check=12,0 index=0x00 tpmver=(hex number) lowestver=(hex number)'
crossystem vdat_flags
run from a dev mode console, flags should be 0x04.
Review URL: http://codereview.chromium.org/6685068
Change-Id: Id7b958ae300d10cdcdc1b17a1bb17b7e5069166f
Change-Id: I8d52765227fd3355431bebc77dfbe0106c889eca
BUG=chrome-os-partner:2748
TEST=compiles; will be porting to H2C next
Review URL: http://codereview.chromium.org/6672068
Change-Id: I976c11c82c3d665a4feb88226e919f16c2440f60
BUG=chrome-os-partner:1657
TEST=manual - see below
make && make runtests
Then test verifying a test image in both dev mode (-b1, no key specified) and recovery mode (key specified)
build/utility/load_kernel_test -b1 ~/b/USB_images/0.11.224.0-alex/chromiumos_test_image.bin
build/utility/load_kernel_test ~/b/USB_images/0.11.224.0-alex/chromiumos_test_image.bin tests/devkeys/recovery_key.vbpubk
And make sure the firmware with this change actually boots to USB and SSD.
NOTE: u-boot-next needs to change to work with this change. will attempt a follow-up CL with that change
Review URL: http://codereview.chromium.org/6626045
