We need to know not only whether the HW WP pin is asserted, but whether the
flash chip has configured its software protection registers to actually
protect anything. This flag can be used to indicate that.
BUG=chrome-os-partner:13265
BRANCH=link
TEST=none
This just adds the flag. Nothing actually sets the flag yet, so there's
nothing to test.
Change-Id: Icba9945fb56eb3a4681486c630cbbdc9232485ef
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/31642
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds two new flags to crossystem:
clear_tpm_owner_request
clear_tpm_owner_done
The first one requests that the firmware clear the TPM owner on the
next boot. When the firmware does this, it will set
clear_tpm_owner_request=0, and set clear_tpm_owner_done=1. The OS can
use the done-flag as a hint that trusted things guarded by the TPM are
no longer trustable.
BUG=chromium-os:31974
TEST=manual
crossystem
// both flags initially 0
crossystem clear_tpm_owner_request=1
crossystem clear_tpm_owner_done=1
// request=1, done=0; done can be cleared but not set by crossystem
reboot
tpmc getownership
// owned=no
crossystem
// request=0, done=1
crossystem clear_tpm_owner_done=0
crossystem
// both flags 0 again
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I49f83f3c39c3efc3945116c51a241d255c2e42cd
Reviewed-on: https://gerrit.chromium.org/gerrit/25646
Some EC's are slow to program their firmware. This could happen at any boot
as part of software sync. This adds the VB_INIT_FLAG_EC_SLOW_UPDATE input
flag to VbInit(), so that vboot knows to display the EC-is-being-programmed
screen when that flag is set.
BUG=chrome-os-partner:12255
TEST=none
This isn't activated yet by anything, so there's nothing to test.
Change-Id: Id4d12e463fcdee017b7c52b53a2facefc33b745f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/29370
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Doesn't check the EC hash, but does jump to the correct image, for now
assuming the hash is good.
BUG=chrome-os-partner:11087
TEST=manual
- Power+refresh. System boots. EC is in RO (verify via 'ectool version')
- Create a BIOS signed *without* RO-normal.
- Power+refresh. System boots. EC ends up in A.
- ectool eventgetb. Event 0x2000 IS present, indicating EC has rebooted
- ectool eventclearb -1
- Power button to shut down, then power button to power back on.
- ectool eventgetb. Event 0x2000 is NOT present.
- crossystem recovery_request=123 && reboot. System reboots to recovery mode
and EC is in read-only (verify via EC console 'sysinfo')
- Power off and on. System boots. EC ends up in A again.
Change-Id: I39682d1bf7215c62a4b20613d029e78194b98826
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27574
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
On some systems, we require the VGA option ROM to be loaded before VbInit()
is called so we can display BIOS screens. If that hasn't happened, we
request it and reboot. Alternatively, if we don't need the option ROM
(normal mode) but we've already loaded it, we un-request it and reboot just
in case there are security vulnerabilities that might be exposed.
Not all systems need preloaded option ROMs. There is an additional input
flag that indicates whether this matters or not.
BUG=chrome-os-partner:8789
TEST=manual
Using keyboard-based dev-mode, switch between normal and dev mode and back.
It should work as expected.
Change-Id: Id1d662014d47ab648c73db4b1647520801f3a0b8
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27125
Reviewed-by: Randall Spangler <rspangler@chromium.org>
For fastest boot, we don't want to load the VGA Option ROM every time, but
only when we need it. Coreboot does that loading, but it can't always know
when it's needed (with keyboard-based dev-mode, coreboot can't tell if we're
in dev-mode or not). By the time we get to U-Boot, it's too late, so we need
two extra bits - one for vboot to tell coreboot to load the Option ROM and
another for coreboot to let vboot know it's been done.
BUG=chrome-os-partner:8789
TEST=manual
The only visible change is that crossystem will now have an "oprom_needed"
flag that can be set or cleared. Nothing actually pays attention to it yet,
though.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I521a6afdfb8ea17a8148b32eeb858844c981de9c
Reviewed-on: https://gerrit.chromium.org/gerrit/26272
Reviewed-by: Randall Spangler <rspangler@chromium.org>
And enable dev_boot_usb by default.
And disable rollback checks.
The first flag is necessary for factory to build with keyboard
controlled dev mode. The other flags are really handy for development
on systems where you've defeated firmware WP and are installing custom
firmware.
BUG=chromium-os:31844
TEST=make && make runtests
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I9d837fee676cb0186ea98f13005ad60a9ab86393
Reviewed-on: https://gerrit.chromium.org/gerrit/25265
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Ready: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9706
TEST=manual
Currently, Link is the only platform that enables this feature.
To enter dev-mode:
Boot into recovery mode using the magic key chord. At the Insert screen,
press Ctrl-D. You'll be asked if you want to enter developer mode. If you
then press ENTER, it will reboot with dev-mode enabled. If you press SPACE
or ESC, it will return to the Insert screen.
If you enter recovery mode through any other means, or if dev-mode is
already enabled, pressing Ctrl-D at the Insert screen will have no effect.
To return to normal mode:
Reboot. At the Dev screen, press ENTER or SPACE. It will reboot to
recovery mode and ask you if you want to return to normal mode. If you
press ESC or power off, you'll still be in dev-mode. Press ENTER or SPACE,
and it will reboot into normal mode (of course, if you've messed up your
images while in dev-mode, you'll just come right back to recovery mode
again).
You can also request a direct return to normal mode by running
crossystem disable_dev_request=1
and rebooting.
Change-Id: I435905855a6c39932ee466cc046bdc4c4c860f98
Reviewed-on: https://gerrit.chromium.org/gerrit/24160
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
BUG=chrome-os-partner:9706
TEST=none
No test yet. The entire boot/dev-mode/recovery flow depends on this working.
This is only part of the process, which will eventually be tested through
FAFT.
Change-Id: Iea6eaf59d4f349590cf9b920e4effb6a2641b2dc
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/23657
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If VbInit() is instructed to look at a virtual dev-mode switch, then it will
use value contained in the TPM's firmware space instead of a hardware GPIO
to determine if developer mode is enabled.
This change just makes it look. It doesn't provide a way to actually set
the value in the TPM. VbInit() isn't being told to look yet, either. Those
changes are coming.
BUG=chrome-os-partner:9706
TEST=none
The usual sanity-check applies:
make
make runtests
But to actually test that this stuff is working IRL requires special tweaks
to other components and monitoring the serial debug output from both EC and
CPU. We'll save the hands-on tests for when it's all done.
Change-Id: Ie485ad2180224e192238bf2a5dbf95bbcb9130f9
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/23067
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When you enter dev-mode,
Pressing Ctrl-U to boot from USB is DISABLED.
Booting any self-signed kernel from the SSD is ENABLED.
This replaces the "crossystem dev_boot_custom" argument with
"crossystem dev_boot_signed_only", which has the opposite polarity.
So if you want to dev-mode to only boot official kernels, you have to
explictly set it that way. If you leave dev-mode and then come back,
it will go back to the conditions shown above.
BUG=chrome-os-partner:5954
TEST=manual
Just run the factory flow. It was broken; this should fix it (except for any
workarounds that were added while it was broken; those may need to be
reverted).
Change-Id: I13e0edbc0e77c5d6ea609dabf771085006cd1805
Reviewed-on: https://gerrit.chromium.org/gerrit/11853
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
This adds a flag to the list of values returned by VbInit(). When
this flag is set, the BIOS may be asked to boot something other than
ChromeOS. If this requires some sort of special preparation, the BIOS
should do it.
BUG=chromium-os:22454
TEST=none
There is no test for this. It requires a change to the BIOS in order
to do anything differently, and we haven't yet decided whether the
BIOS should pay attention to it.
Change-Id: I5d89e7cd5b745ee74b8ace7fa613c0db03eebefd
Reviewed-on: https://gerrit.chromium.org/gerrit/11714
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
As shipped, H2C only loads the option ROM for the built-in video, and that
only when it needs display the BIOS warning screens.
By setting a flag in the GBB, you can allow all option ROMs to be loaded:
Note that we'll never enable this ourselves (and there's a factory test to
ensure that*) because it executes non-verified code. But if a customer wants
to void their warranty and set this flag in the read-only flash so they can
install and use other PCI devices, they should be able to do so.
BUG=chrome-os-partner:6148
TEST=none
The only way to test this is to use a BIOS that was compiled with serial
debugging enabled, so there's nothing for QA to do. If you have such a BIOS,
you can see the difference like so:
flashrom -r oldbios.bin
gbb_utility -s --flags=2 oldbios.bin newbios.bin
flashrom -w newbios.bin
<reboot>
When bit 1 of the GBB flags is 0, you'll see these lines in the serial
output:
LoadOpRomImage-->GetSystemConfigurationTable Status = Success
LoadOpRomImage-->GetH2cBootMode Status = Success
When bit 1 of the GBB flags is 1, you'll see these lines in the serial
output:
LoadOpRomImage-->GetSystemConfigurationTable Status = Success
LoadOpRomImage-->GetH2cBootMode Status = Success
LoadOpRomImage-->PCI OpRom on 1.0.0 is allowed!!!
This happens in any boot mode (normal, developer, recovery).
--
*The factory test for GBB zero flags is gft_clear_gbb_flags.sh, in
src/platform/factory_test_tools
Change-Id: I31a10cc9d562b4b83669ca8a114b60e87ae28b0a
Reviewed-on: https://gerrit.chromium.org/gerrit/11505
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This also fixes one place where TPM error codes were getting lost.
BUG=chromium-os:18132
TEST=make && make runtests
Change-Id: I83c74e1103805f166d1dc7448be7d67bd46d15b3
Reviewed-on: http://gerrit.chromium.org/gerrit/4659
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Pressing Tab at a firmware screen now displays real data, including
the recovery reason, HWID, and contents of VbNvStorage.
Entry point start/end time tracking in VbSharedData now refers to the
new wrapper APIs.
Added capability for calling firmware to request recovery mode (for
example, if it's unable to initialize RAM, can't find the SSD, etc.).
Previously, calling firmware had no (good) way to do this other than
faking the recovery button being pressed.
BUG=chromium-os:17018
TEST=emerge on x86 and tegra2_seaboard
Change-Id: I7d377f279842b30a10d945d13571c41c464633f1
Reviewed-on: http://gerrit.chromium.org/gerrit/3814
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
