This is part 2 of the wrapper API refactor. It adds stub
implementations for the host, and changes the host-side utilities to
use them. Firmware implementation is unchanged in this CL (other than
a few updates to macros).
BUG=chromium_os:16997
TEST=make && make runtests
Change-Id: I63989bd11de1f2239ddae256beaccd31bfb5acef
Reviewed-on: http://gerrit.chromium.org/gerrit/3256
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Header file changes for wrapper API implementation
Crossystem support for reading recovery reason from VbSharedData, and
explicit support for version 1 VbSharedData structs.
BUG=chromium-os:16970
TEST=make && make runtests; run crossystem on Alex and make sure it still reports recovery_reason in recovery mode.
Change-Id: I15195b899583e425d3c9e8df09842d764528e2cb
Reviewed-on: http://gerrit.chromium.org/gerrit/3203
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
This CL builds upon earlier firmware and kernel changes (see CLs
related to the same bug, chromium-os:12522).
ARM firmware now simulates both Nvram storage and VDAT buffer, the
structures the x86 version uses extensively to communicate back and
forth between firmware/kernel/userland.
So, to make crossystem work on arm, all what's needed is to provide
architecture specific interface to Nvram and VDAT simulation, and
architecture specific processing for variables which are accessed on
ARM platforms in a different way.
The few discrepancies and platform specifics which had to be addressed
for ARM specifically are as follows:
- the Nvram contents are cached in the shared memory and available for
reading as part of /sys/kernel/debug/chromeos_arm. When writing
Nvram, the same file needs to be written, but only the 16 bytes
(representing the Nvram contents) are aacepted.
- the VDAT buffer also comes from the shared memory (as part of the
same sysfs file)
- when crossystem starts, it needs to read in this shared memory
contents, a` weak' function VbArchInit() is being added such that it
is provided on ARM platforms only, on x86 an empty stub is called.
- current developer/recovery request/ro firmware switch states are
retrieved through GPIO drivers. The GPIO numbers are defined in the
file, the GPIO driver is supposed to be configured before
crsossystem can operate.
- the BINF values are supplied through an array within shared memory,
it would be easy to refactor both x86 and ARM use the same code to
process BINF values, but with this submission the code is duplicated
to minimize x86 impact.
- the following crossystem variables do not have ARM equivalents,
thier values are reported as '(error)':
recoverysw_ec_boot
savedmem_base
savedmem_size
BUG=chromium-os:12522
TEST=manual:
. bring up a kaen system
. execute the following script to enable the appropriate GPIOSs:
for gpio in 56 59 168; do echo $gpio > /sys/class/gpio/export; done
. run `crossystem' and observe reasonable output values
. to verify that it reads GPIOs properly, try
echo $(./crossystem recoverysw_cur)
with the miniservo 'GOOG_REC' button pressed and released, observe
different readings (note that the state of the button is reversed,
the released button is reported as '1')
. to verify the write capabilities, note that the nvram contents can
be accessed using the following shell commands
echo 3 > /proc/sys/vm/drop_caches
2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && \
od -t x1 /tmp/blk | head -1
(the first command cause the device cache dropped, and the second
command accesses the device contents.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
localhost var # echo $(./crossystem fwb_tries)
10
localhost var # echo 3 > /proc/sys/vm/drop_caches
localhost var # 2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && od -t x1 /tmp/blk | head -1
0000000 60 0a 00 be 00 00 00 00 00 00 00 02 00 00 00 a2
localhost var # ./crossystem fwb_tries=9
localhost var # echo $(./crossystem fwb_tries)
9
localhost var # echo 3 > /proc/sys/vm/drop_caches
localhost var # 2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && od -t x1 /tmp/blk | head -1
0000000 60 09 00 be 00 00 00 00 00 00 00 02 00 00 00 8a
localhost var #
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Change-Id: Ie4c6ff44441d98a42b1057953208fdb90c08f46d
Reviewed-on: http://gerrit.chromium.org/gerrit/113
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Add the missing return statement to allow to tell between
different recovery reasons on legacy firmware.
Change-Id: I287e9d91dde040dd0edbe23422dc8914f81cc9f2
BUG=chromium-os:14295
TEST=manual
On a system with a chromeOS Flash USB drive plugged in:
- preserve currently running firmware
- corrupt both RW firmware sections
- restart the system (it comes up in recovery mode)
- login
- run `crossystem recovery_reason' and observe the result:
it used to print '66' before the fix, prints '3' after the fix.
- restore the firmware
Review URL: http://codereview.chromium.org/6879051
Change-Id: I1c4240ebe5783ca923c310061e2a76947aa6601b
R=reinauer@chromium.org
BUG=chromium-os:14030
TEST=manual
On a Mario:
crossystem fwupdate_tries=3
crossystem fwupdate_tries # should be 3
cat /mnt/stateful_partition/.need_firmware_update # should be 3
crossystem fwupdate_tries=0
crossystem fwupdate_tries # should be 0
cat /mnt/stateful_partition/.need_firmware_update # should complain file doesn't exist
On a newer platform:
crossystem fwupdate_tries=3
crossystem fwupdate_tries # should be 3
cat /mnt/stateful_partition/.need_firmware_update # should complain file doesn't exist
crossystem fwupdate_tries=0
crossystem fwupdate_tries # should be 0
cat /mnt/stateful_partition/.need_firmware_update # should complain file doesn't exist
Review URL: http://codereview.chromium.org/6825047
This should be ready for the ARM team to pick up and work on. I added
a placeholder ARM implementation file, though it's not hooked up in
the Makefile yet.
As soon as you implement the VbNvStorage APIs, all the related
crossystem commands will start working. Ditto for VbSharedData.
The params which x86 gets from ACPI you'll need to get from u-boot
somehow, probably via your own kernel driver.
R=robotboy@chromium.org
BUG=chromium-os:12522
TEST=emerge-x86-alex vboot_reference, make sure it still works on x86
Review URL: http://codereview.chromium.org/6780008
Change-Id: I628ee56508421b937ed50db7cb9b8385408d2f5e
