In order to disable PD software sync but still do EC software sync
it is useful to have a separate GBB flag for it.
This will allow me to release a Samus P2B firmware image that will
update the EC but not the PD, since the PD FW that comes on P2B
devices cannot be updated with software sync.
BUG=chrome-os-partner:30079
BRANCH=None
TEST=flash BIOS with updated EC+PD:
1) no GBB flags to override behavior updates both EC and PD
2) GBB flag to disable EC software sync disables both EC and PD update
3) GBB flag to disable PD software sync disables only PD update
Change-Id: I49ffb59238bee4a2dd66b24f2516e3ce46ea06cd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211910
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1) GBB flag to skip EC software sync, so EC will be untouched. Needed
for EC development.
2) GBB flag to default to booting legacy at end of dev screen timeout.
Very handy for booting Ubuntu (or other OS).
Also added unit tests for the new flags.
BUG=chrome-os-partner:20111
BRANCH=none
TEST=make runtests
Change-Id: I9da87d87014881a1b1393b0b4a5acb921d080066
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58270
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This option is disabled per default and can be enabled with
crossystem dev_boot_legacy=1
or by setting the GBB flag
GBB_FLAG_FORCE_DEV_BOOT_LEGACY 0x00000080
BUG=chrome-os-partner:6108
TEST=crossystem dev_boot_legacy=1
boot to dev mode screen, press CTRL-L, see SeaBIOS start
(other CLs needed)
BRANCH=link
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: I593d2be7cff5ca07b8d08012c4514a172bd75a38
Reviewed-on: https://gerrit.chromium.org/gerrit/31265
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
At DEV screen:
- Space triggers TONORM
- Enter is ignored unless new GBB flag is set
At TONORM screen:
- Enter always means YES
- Space is ignored
So, if you hold the space key at the dev screen, you'll go to tonorm
and stay there until you press Enter or Esc. If you hold the Enter
key at the dev screen, nothing will happen.
Add a GBB flag to allow Enter to trigger the TONORM screen; this will
be used by FAFT testing.
BRANCH=all
BUG=chrome-os-partner:12699
TEST=manual
1. press enter at dev screen. nothing happens.
2. press space at dev screen. tonorm.
3. press space at tonorm. nothing happens.
4. press enter at tonorm. turns off dev mode.
Change-Id: I9f3128d5114e1486911cc4d76d0ccd5649de1680
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30456
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
And enable dev_boot_usb by default.
And disable rollback checks.
The first flag is necessary for factory to build with keyboard
controlled dev mode. The other flags are really handy for development
on systems where you've defeated firmware WP and are installing custom
firmware.
BUG=chromium-os:31844
TEST=make && make runtests
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I9d837fee676cb0186ea98f13005ad60a9ab86393
Reviewed-on: https://gerrit.chromium.org/gerrit/25265
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Ready: Randall Spangler <rspangler@chromium.org>
This adds a flag to the list of values returned by VbInit(). When
this flag is set, the BIOS may be asked to boot something other than
ChromeOS. If this requires some sort of special preparation, the BIOS
should do it.
BUG=chromium-os:22454
TEST=none
There is no test for this. It requires a change to the BIOS in order
to do anything differently, and we haven't yet decided whether the
BIOS should pay attention to it.
Change-Id: I5d89e7cd5b745ee74b8ace7fa613c0db03eebefd
Reviewed-on: https://gerrit.chromium.org/gerrit/11714
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
As shipped, H2C only loads the option ROM for the built-in video, and that
only when it needs display the BIOS warning screens.
By setting a flag in the GBB, you can allow all option ROMs to be loaded:
Note that we'll never enable this ourselves (and there's a factory test to
ensure that*) because it executes non-verified code. But if a customer wants
to void their warranty and set this flag in the read-only flash so they can
install and use other PCI devices, they should be able to do so.
BUG=chrome-os-partner:6148
TEST=none
The only way to test this is to use a BIOS that was compiled with serial
debugging enabled, so there's nothing for QA to do. If you have such a BIOS,
you can see the difference like so:
flashrom -r oldbios.bin
gbb_utility -s --flags=2 oldbios.bin newbios.bin
flashrom -w newbios.bin
<reboot>
When bit 1 of the GBB flags is 0, you'll see these lines in the serial
output:
LoadOpRomImage-->GetSystemConfigurationTable Status = Success
LoadOpRomImage-->GetH2cBootMode Status = Success
When bit 1 of the GBB flags is 1, you'll see these lines in the serial
output:
LoadOpRomImage-->GetSystemConfigurationTable Status = Success
LoadOpRomImage-->GetH2cBootMode Status = Success
LoadOpRomImage-->PCI OpRom on 1.0.0 is allowed!!!
This happens in any boot mode (normal, developer, recovery).
--
*The factory test for GBB zero flags is gft_clear_gbb_flags.sh, in
src/platform/factory_test_tools
Change-Id: I31a10cc9d562b4b83669ca8a114b60e87ae28b0a
Reviewed-on: https://gerrit.chromium.org/gerrit/11505
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The --flags is added to get/set the "flags" field.
BUG=chrome-os-partner:2317
TEST=gbb_utiltiy --get --flags bios.bin # see flags as 0
gbb_utility --set --flags=0x3052 bios.bin
# for version error message for GBB1.0 files,
# and see flag value changed for GBB1.1+ files
gbb_utility --get --flags bios.bin
# flag as 0 for GBB1.0, 0x3052 for GBB1.1+
Change-Id: I7aab62c8fc32ea08b4822e496f543511ff5e5ebc
Reviewed-on: http://gerrit.chromium.org/gerrit/6721
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Still need to update gbb_utility and firmware to use the flags.
BUG=chrome-os-partner:2317
TEST=make && make runtests
Change-Id: I16c77a175c78efa3212a00bbf94d68384ef1829f
Reviewed-on: http://gerrit.chromium.org/gerrit/4817
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
