As kernel has adjusted the value of /sys/class/gpio/gpio${PORT}/ with
active_low stuff before returning it to user, crossystem should not do
another adjustment.
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
BUG=chrome-os-partner:11297
TEST=On Snow, run crossystem and see wpsw_boot equals to wpsw_cur.
Then invert /sys/class/gpio/gpio${PORT}/active_low value, and
see wpsw_boot does not equal to wpsw_cur.
Change-Id: I09fec89788bc4393775d5cf9763b8cebeb645ad4
Reviewed-on: https://gerrit.chromium.org/gerrit/27252
Commit-Ready: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
For the record, zero is a valid GPIO port number. Unfortunately
firmware uses port zero to denote that a GPIO port is not exist.
So crossystem should not attempt to read GPIO port zero, but
return error instead.
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
BUG=chrome-os-partner:11296
TEST=On Snow, run crossystem and see devsw_cur and recoverysw_cur
are "(error)"
Change-Id: I70b15824f613df1e46bf152515ad4e9362c9f066
Reviewed-on: https://gerrit.chromium.org/gerrit/27251
Commit-Ready: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Cheng-Yi Chiang <cychiang@chromium.org>
Tested-by: Cheng-Yi Chiang <cychiang@chromium.org>
This reverts commit 7ec59576f6.
We would like to keep dev_cur and recovery_cur output "(error)" so that
factory process knows that firmware uses virtual switches.
I think this is strange, but this is how factory process works for now.
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
BUG=chromium-os:10007
TEST=none
Change-Id: I370a3e9f5a8847916445348abb81f7c4bbf3d27f
Reviewed-on: https://gerrit.chromium.org/gerrit/26909
Commit-Ready: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This change exports gpio number if it can not be accessed. Ignore
the active_low checking for compatibility.
Signed-off-by: Rong Chang <rongchang@chromium.org>
BUG=chrome-os-partner:11029
TEST=manual
Run crossystem and check WP pin status
Change-Id: I0885ab21c6c6d614945e4fda49a373e8619772a9
Reviewed-on: https://gerrit.chromium.org/gerrit/26563
Commit-Ready: Tom Wai-Hong Tam <waihong@chromium.org>
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
Tested-by: Tom Wai-Hong Tam <waihong@chromium.org>
As dev switch and recovery switch may be virtual, crossystem has to
distinguish virtual switches from physical ones.
Since to a virtual switch, its current value should always equal to its
boot value, return a boot value when asked for a current value.
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
BUG=chrome-os-partner:10007
TEST=crossystem devsw_cur|recoverysw_cur show correct value on Snow
Change-Id: Ia73147ecd5528a3cc5276aff02a632ce4f52ea8b
Reviewed-on: https://gerrit.chromium.org/gerrit/26568
Commit-Ready: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
Samsung want to know what memory type on the device. So this CL adds a
new field ddr_type to crossystem utility in order to query this info.
It is only available on ARM platform so far.
BUG=chrome-os-partner:10857
TEST=Built and boot on Snow successfuly. On userspace, query the field via:
localhost ~ # crossystem ddr_type
ddr3
Change-Id: I01d1dec412fe4052e1ea6cfe2e53830da97a710b
Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26411
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
For fastest boot, we don't want to load the VGA Option ROM every time, but
only when we need it. Coreboot does that loading, but it can't always know
when it's needed (with keyboard-based dev-mode, coreboot can't tell if we're
in dev-mode or not). By the time we get to U-Boot, it's too late, so we need
two extra bits - one for vboot to tell coreboot to load the Option ROM and
another for coreboot to let vboot know it's been done.
BUG=chrome-os-partner:8789
TEST=manual
The only visible change is that crossystem will now have an "oprom_needed"
flag that can be set or cleared. Nothing actually pays attention to it yet,
though.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I521a6afdfb8ea17a8148b32eeb858844c981de9c
Reviewed-on: https://gerrit.chromium.org/gerrit/26272
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Confirmed via codesearch that these fields are not used outside of
vboot_reference itself, and the only use inside vboot_reference is one
test which checked that the test error generation itself worked.
BUG=chromium-os:31668
TEST=make && make runtests
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Ic393e126ca2853f7aaff19ffd6fcdbdb1c47689f
Reviewed-on: https://gerrit.chromium.org/gerrit/24895
Reviewed-by: Simon Glass <sjg@chromium.org>
This just adds the vbutil_ec tool (and a simple test of the library
functions related to it).
BUG=chrome-os-partner:7459, chromium-os:27142
TEST=manual
make
make runtests
Change-Id: I2a2c4e7cfb8ac6ce2229c5de4252a5cc89321fa5
Reviewed-on: https://gerrit.chromium.org/gerrit/21868
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
We need to be able to tell when a ChromeOS machine was brought up
using netboot. This condition will be communicated from firmware using
the BINF.3 ACPI object (upcoming u-boot change).
BUG=chrome-os-partner:7952
TEST=manual
. boot a ChromeOS machine using the updated firmware and examine the
main firmware type reported by crossystem:
localhost ~ # echo $(/var/crossystem mainfw_type)
netboot
Change-Id: I35b10f41eb1f928a122c384d0179c9027f263acd
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/20707
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously, 'cros_debug' would ignore the kernel command line if
the system was booted in recovery mode. The check provided no
particular security benefit; it served only to complicate the work
of developers who wanted to boot debug images over USB with dev-key
signed firmware.
BUG=chromium-os:19236
TEST=Test 'crossystem cros_debug' on a system in the cited use case
Change-Id: Ie664c50984411340a10896137022d7d4ff503d0a
Reviewed-on: https://gerrit.chromium.org/gerrit/6663
Commit-Ready: Richard Barnette <jrbarnette@chromium.org>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
There is a filter in crossystem which makes sure that it accepts GPIO
information only from a subset of GPIO controllers. Panther Point
needs to be included in the list.
BUG=chrome-os-partner:8615
TEST=manual
. run the new crossystem on a Link
. modify write protect and and recovery (as it comes from servo-2)
pins' status
. observe the appropriate crossystem values change
Change-Id: I3ac269a9ea520f2c44ee090fe71ec8ad808692ba
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/18936
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This started out as a simple fix for a minor bug and turned into a nearly
complete rewrite. Now that it's done I'm not sure it really matters. This
version is a lot cleaner about handling command-line args, but isn't
otherwise noticeably better. Sigh.
BUG=none
TEST=manual
make
make runtests
Change-Id: I9c194e9c0e6418488635989ef666bc83c6e39816
Reviewed-on: https://gerrit.chromium.org/gerrit/18268
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds in logic to check that ReadFdtBlock within ReadFdtPlatformFamily
succeeded, returning NULL on failure.
BUG=None
TEST=Manual, run crossystem on an ARM system without a valid compatible FDT
entry and ensure (error) is returned for platform_family.
Change-Id: I6351292ff73e4bc08b028f85e72ccfe62159194a
Reviewed-on: https://gerrit.chromium.org/gerrit/14321
Reviewed-by: Olof Johansson <olofj@chromium.org>
Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Commit-Ready: Bernie Thompson <bhthompson@chromium.org>
This extends the ReadFdtBlock function for ARM to allow for a direct path
to a FDT entry by starting the property with a '/'. This allows the
ReadFdtPlatformFamily function to use a direct path instead of stepping back
through folders, and will enable future crossystem entries to do the same.
BUG=chromium-os:24669
TEST=Manual
Change-Id: Ibddb881815947259c2532d7f5474eda5fdc9f803
Reviewed-on: https://gerrit.chromium.org/gerrit/14305
Reviewed-by: Olof Johansson <olofj@chromium.org>
Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Commit-Ready: Bernie Thompson <bhthompson@chromium.org>
This implements a platform_family value within the crossystem utility,
as the platform (particularly for ARM) is not easily accessable elsewhere at
runtime.
For the ARM side this contains a table which is used to determine the platform
family based on the /proc/device-tree/compatible entry. Similarly on x86 the
table is used to check against PCI entries. Additional entries can be made
as new platform families emerge.
BUG=chromium-os:24669
TEST=Manual, verified that crossystem runs properly and returns a valid
platform_family value on various platforms (mario, alex, z600, x220, etc).
Change-Id: Id0e973902d27ead471c1243bcc6c3292acc8479d
Reviewed-on: https://gerrit.chromium.org/gerrit/13520
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Ready: Olof Johansson <olofj@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Tested-by: Olof Johansson <olofj@chromium.org>
Since x86 and amd64 boards use the same firmware and are otherwise identical
use the same implementation for crossystem on both
BUG=chromium-os:21386
TEST=emerge-x86-generic ; test crossystem works on Samsung Series 5
TEST=emerge-amd64-generic ; test crossystem works on Samsung Series 5
TEST=run unit tests on build machine with:
RUNTESTS=1 make
Change-Id: Ica516cca7ead6cb9cdfae0894bd532669ba3ba88
Reviewed-on: https://gerrit.chromium.org/gerrit/12059
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
When you enter dev-mode,
Pressing Ctrl-U to boot from USB is DISABLED.
Booting any self-signed kernel from the SSD is ENABLED.
This replaces the "crossystem dev_boot_custom" argument with
"crossystem dev_boot_signed_only", which has the opposite polarity.
So if you want to dev-mode to only boot official kernels, you have to
explictly set it that way. If you leave dev-mode and then come back,
it will go back to the conditions shown above.
BUG=chrome-os-partner:5954
TEST=manual
Just run the factory flow. It was broken; this should fix it (except for any
workarounds that were added while it was broken; those may need to be
reverted).
Change-Id: I13e0edbc0e77c5d6ea609dabf771085006cd1805
Reviewed-on: https://gerrit.chromium.org/gerrit/11853
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
VbCmosWrite should seek to correct offset before starting to write;
also fixed file handle leakage.
BUG=chromium-os:23000
TEST=crossystem recovery_request=1; echo $? # show: 0
crossystem recovery_request # show: 1
reboot # see recovery screen
Change-Id: I33bca8af2b351ba9b364309838df699a31bb543a
Reviewed-on: https://gerrit.chromium.org/gerrit/11756
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Ready: Hung-Te Lin <hungte@chromium.org>
A legacy checksum in CMOS is not maintained by coreboot and may be invalid. If
the Linux kernel driver sees that the checksum is wrong, it will return EIO
when read from or written to. That makes crossystem return an error since it
can't read the CMOS, and it also prevents it from changing some settings.
One way to fix the problem would be to remove the checksum check in the kernel
driver. This would change the semantics of the driver so that either x86 was
inconsistent with the other architectures, or change the semantics of those
other architectures as well.
Another option would be to fix the checksum during manufacturing since nothing
should be changing those particular bytes of CMOS. The problem with this
approach is that something might corrupt the CMOS after manufacturing, and
we'd have the same problem again.
Yet another solution would be to make the firmware, most likely coreboot,
actually keep the checksum up to date. This seems like an awful waste of boot
time, the bytes protected by the checksum aren't actually used by anything,
and the bytes of the CMOS that are used are protected by vboot using its own
checksum.
The solution implemented here is to make crossystem recognize when the driver
has determined that the checksum is invalid and make it call an ioctl that
gets the driver to fix the checksum. Wrapper functions for fread, fwrite,
fgetc, and fputc are implemented which first attempt to read or write, on
failure check for the EIO error code, and if they find it to call the
appropriate ioctl and attempt the access again. This way, we won't take any
extra time to talk to the CMOS when everything is working properly, and when
there's a problem it gets fixed up transparently. One problem with this
approach is that using the /dev/nvram device file will still fail until
crossystem is run at least once and given a chance to fix the checksum.
BUG=chrome-os-partner:6718
TEST=For version 1, verified that crossystem reported an error on Sameer's
Lumpy. Used strace to verify that crossystem received an EIO error when trying
to read or write /dev/nvram. Built a new image with this change and booted it
using a USB stick. Ran crossystem and verified that crossystem no longer
reported an error. Rebooted into the original image and verified that
crossystem worked there as well, indicating that the persistent problem in the
CMOS had been corrected.
For version 2, the same as version 1 except that I used a custom version of
u-boot to purposefully corrupt the CMOS rather than using Sameer's Lumpy.
Change-Id: I929535bd2a7d666e41a707b6b24c3f0b0df1147f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/11373
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Although we're now using a single unified BIOS, it is pretty nice to be able
to get a shell in developer mode while still using verified boot for the
kernel and filesystem. Alex & ZGB implemented this by requiring the dev-mode
user to install a special dev-mode BIOS. We don't do that, but we DO require
setting a special flag with "crossystem" to accomplish the same thing.
In order to allow booting a self-signed kernel, you must boot in developer
mode, open a shell, and run this:
crossystem dev_boot_custom=1
Special note to internal developers: If you're in the habit (as I am) of
booting directly from a USB stick in dev-mode, you'll have to run this:
crossystem dev_boot_custom=1 dev_boot_usb=1
Just using dev_boot_usb=1 is no longer enough, because the USB kernel is
signed using the recovery key and by pressing Ctrl-U, we validate it with
the kernel data key. That worked before this change because any self-signed
kernel was fine, and that's how the USB key was treated. Now it actually
requires a verified signature until you enable dev_boot_custom=1 also.
BUG=chrome-os-partner:5954
TEST=manual
Boot once in normal mode, which clears the special flags. Then switch to
developer mode. You should be able to boot and get a root shell.
Run
crossystem dev_boot_usb=1
Obtain a USB recovery image that's keyed differently. For example, if you're
testing with dev-keys, use a PVT-signed image or vice-versa.
Reboot into dev-mode with the USB recovery stick inserted. At the dev-mode
screen, press Ctrl-U. You should hear a single beep, but it should not boot.
Press Ctrl-D to boot from the hard drive, log in to a shell and run
crossystem dev_boot_custom=1
Repeat the previous test. This time when you press Ctrl-U, it should boot
the recovery image. Turn the system off before it does anything.
That's it.
Change-Id: I1811ee9a188974b3f94c83c52b00b60028b86c69
Reviewed-on: https://gerrit.chromium.org/gerrit/11442
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
... instead of using hard-coded 192 constant.
BUG=chromium-os:19876
TEST=manual
If crossystem still reports correct values for devsw_cur recoverysw_cur (and
maybe wpsw_cur, although that's a separate bug), then it works.
Change-Id: Id8d4fb389bfd78f40da9ef08aa372071d77cbec1
Reviewed-on: http://gerrit.chromium.org/gerrit/7014
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
BUG=chrome-os-partner:4879
TEST=manual (just try it)
NOTE: You must use a BIOS that exports the correct ACPI tables.
Change-Id: I027680a203f3a566edf9ed82fb1fe1a9fa4c4f0f
Reviewed-on: http://gerrit.chromium.org/gerrit/4957
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
U-Boot should not parse the raw contents of VbNvStorage, and so cannot
read the recovery reason from the VbNvStorage. On the other hand, it is
easy for crossystem to read the recovery reason from the VbNvStorage
itself.
After this change is merged, U-Boot will stop providing the (incorrect)
recovery reason in the device tree.
BUG=chromium-os:17876,chromium-os:17852
TEST=press recovery button and see crossystem reports recovery_reason=2
Change-Id: I236667f0b4f2e25da193cf6b6f7db3871d1e093f
Reviewed-on: http://gerrit.chromium.org/gerrit/4396
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This also includes reading the nonvolatile storage from disk instead of
through the device-tree, since it's not updated there.
BUG=none
TEST=read and write a few crossystem variables
Change-Id: I6836a6eb0c92a0560dd393e694690a694bdb77a6
Reviewed-on: http://gerrit.chromium.org/gerrit/4078
Tested-by: Olof Johansson <olofj@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
The old (v2.0) parser is compatible with new (v2.1) structs. That is,
this won't break existing firmware or vbutil_firmware.
A new (v2.1) parser parsing an old (v2.0) struct will return 0 for the
flags.
This will be used to support the RO-normal code path in a subsequent CL.
BUG=chromium-os:17304
TEST=added unit tests; make && make runtests
Change-Id: I73bcd8acd3330b0d7d143061b5ef838e6d79cf1a
Reviewed-on: http://gerrit.chromium.org/gerrit/4030
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
This CL builds upon recent changes in u-boot and kernel. (see issue
ids: 15744, 16665)
- Remove /sys/kernel/debug/chromeos_arm share memory mechanism
- Load properties from /proc/device-tree/crossystem/*
- Write NVCXT to /dev/mmcblk0:lba[0]
BUG=chromium-os:17300
TEST=manual
Run crossystem on device console. Check current values of gpio
switches. All other values are exported from FDT directly.
Change-Id: Ib8db4a4aeb6dc36308ad8882403cb2f5978a5c70
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: http://gerrit.chromium.org/gerrit/3676
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
BUG=chromium-os:17433
TEST=make && make runtests. Additional manual tests:
0. Insert a valid dev-signed USB key.
1. Boot with dev switch off.
`crossystem dev_boot_usb` should print 0.
2. Flip dev switch on.
`crossystem dev_boot_usb` should print 0.
Ctrl+U at dev screen should beep, but not boot USB.
3. Type `crossystem dev_boot_usb=1`. Should succeed.
`crossystem dev_boot_usb` should print 1.
4. Reboot system.
At the dev mode warning, press Ctrl+U
System should boot from USB key
`crossystem dev_boot_usb` should print 0.
5. Flip dev switch off.
`crossystem dev_boot_usb` should print 0.
6. Flip dev switch on.
`crossystem dev_boot_usb` should print 0.
Note that this does not apply to Cr-48, Alex, or ZGB.
Change-Id: Idf85fdd642f38f531c89e5fa5b1679e84936d4da
Reviewed-on: http://gerrit.chromium.org/gerrit/3875
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Randall Spangler <rspangler@chromium.org>
Pressing Tab at a firmware screen now displays real data, including
the recovery reason, HWID, and contents of VbNvStorage.
Entry point start/end time tracking in VbSharedData now refers to the
new wrapper APIs.
Added capability for calling firmware to request recovery mode (for
example, if it's unable to initialize RAM, can't find the SSD, etc.).
Previously, calling firmware had no (good) way to do this other than
faking the recovery button being pressed.
BUG=chromium-os:17018
TEST=emerge on x86 and tegra2_seaboard
Change-Id: I7d377f279842b30a10d945d13571c41c464633f1
Reviewed-on: http://gerrit.chromium.org/gerrit/3814
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
The content in VbSharedMem should be VbSharedData instead of FMAP.
BUG=chromium-os:17168
TEST=crossystem # seeing correct value
(the test need a u-boot with fix included)
Change-Id: I3d7d1eb2b35c9475c2047e9479cee69464da20b1
Reviewed-on: http://gerrit.chromium.org/gerrit/3436
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
This is part 2 of the wrapper API refactor. It adds stub
implementations for the host, and changes the host-side utilities to
use them. Firmware implementation is unchanged in this CL (other than
a few updates to macros).
BUG=chromium_os:16997
TEST=make && make runtests
Change-Id: I63989bd11de1f2239ddae256beaccd31bfb5acef
Reviewed-on: http://gerrit.chromium.org/gerrit/3256
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Header file changes for wrapper API implementation
Crossystem support for reading recovery reason from VbSharedData, and
explicit support for version 1 VbSharedData structs.
BUG=chromium-os:16970
TEST=make && make runtests; run crossystem on Alex and make sure it still reports recovery_reason in recovery mode.
Change-Id: I15195b899583e425d3c9e8df09842d764528e2cb
Reviewed-on: http://gerrit.chromium.org/gerrit/3203
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
The error was:
arch/arm/lib/crossystem_arch.c: In function ‘VbReadSharedMemory’:
arch/arm/lib/crossystem_arch.c:134: error: format ‘%d’ expects type ‘int’, but argument 5 has type ‘long unsigned int’
BUG=none
TEST=(outside choot): cd src/platform/vboot_reference; make
Change-Id: I5e1f69abd125fe06cf6ae04a7946568bdbcef83e
Reviewed-on: http://gerrit.chromium.org/gerrit/1547
Tested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
U-boot and crossystem interpret the same switch state differently
for 'recovery mode' and 'write protect', This change adds the
ability to invert certan GPIO readings such that crossystem and
u-boot return the same values.
BUG=chromium-os:15393
TEST=manual
Running crossystem on the target with developer u-boot image:
- observe that recoverysw_cur reading matches recoverysw_boot and
wpsw_cur reading matches_wpsw_boot.
- try rebooting with recovery or developer mode buttons pressed,
observe the change in reported values of devsw_boot and
recoverysw_boot.
- observe reported values of devsw_cur and recoverysw_cur
following pressing of the buttons.
Change-Id: I628f59b60008719bbff1722d23154ce934af6c36
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://gerrit.chromium.org/gerrit/1193
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This CL builds upon earlier firmware and kernel changes (see CLs
related to the same bug, chromium-os:12522).
ARM firmware now simulates both Nvram storage and VDAT buffer, the
structures the x86 version uses extensively to communicate back and
forth between firmware/kernel/userland.
So, to make crossystem work on arm, all what's needed is to provide
architecture specific interface to Nvram and VDAT simulation, and
architecture specific processing for variables which are accessed on
ARM platforms in a different way.
The few discrepancies and platform specifics which had to be addressed
for ARM specifically are as follows:
- the Nvram contents are cached in the shared memory and available for
reading as part of /sys/kernel/debug/chromeos_arm. When writing
Nvram, the same file needs to be written, but only the 16 bytes
(representing the Nvram contents) are aacepted.
- the VDAT buffer also comes from the shared memory (as part of the
same sysfs file)
- when crossystem starts, it needs to read in this shared memory
contents, a` weak' function VbArchInit() is being added such that it
is provided on ARM platforms only, on x86 an empty stub is called.
- current developer/recovery request/ro firmware switch states are
retrieved through GPIO drivers. The GPIO numbers are defined in the
file, the GPIO driver is supposed to be configured before
crsossystem can operate.
- the BINF values are supplied through an array within shared memory,
it would be easy to refactor both x86 and ARM use the same code to
process BINF values, but with this submission the code is duplicated
to minimize x86 impact.
- the following crossystem variables do not have ARM equivalents,
thier values are reported as '(error)':
recoverysw_ec_boot
savedmem_base
savedmem_size
BUG=chromium-os:12522
TEST=manual:
. bring up a kaen system
. execute the following script to enable the appropriate GPIOSs:
for gpio in 56 59 168; do echo $gpio > /sys/class/gpio/export; done
. run `crossystem' and observe reasonable output values
. to verify that it reads GPIOs properly, try
echo $(./crossystem recoverysw_cur)
with the miniservo 'GOOG_REC' button pressed and released, observe
different readings (note that the state of the button is reversed,
the released button is reported as '1')
. to verify the write capabilities, note that the nvram contents can
be accessed using the following shell commands
echo 3 > /proc/sys/vm/drop_caches
2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && \
od -t x1 /tmp/blk | head -1
(the first command cause the device cache dropped, and the second
command accesses the device contents.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
localhost var # echo $(./crossystem fwb_tries)
10
localhost var # echo 3 > /proc/sys/vm/drop_caches
localhost var # 2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && od -t x1 /tmp/blk | head -1
0000000 60 0a 00 be 00 00 00 00 00 00 00 02 00 00 00 a2
localhost var # ./crossystem fwb_tries=9
localhost var # echo $(./crossystem fwb_tries)
9
localhost var # echo 3 > /proc/sys/vm/drop_caches
localhost var # 2>/dev/null dd if=/dev/mmcblk0 of=/tmp/blk bs=16 count=1 && od -t x1 /tmp/blk | head -1
0000000 60 09 00 be 00 00 00 00 00 00 00 02 00 00 00 8a
localhost var #
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Change-Id: Ie4c6ff44441d98a42b1057953208fdb90c08f46d
Reviewed-on: http://gerrit.chromium.org/gerrit/113
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Add the missing return statement to allow to tell between
different recovery reasons on legacy firmware.
Change-Id: I287e9d91dde040dd0edbe23422dc8914f81cc9f2
BUG=chromium-os:14295
TEST=manual
On a system with a chromeOS Flash USB drive plugged in:
- preserve currently running firmware
- corrupt both RW firmware sections
- restart the system (it comes up in recovery mode)
- login
- run `crossystem recovery_reason' and observe the result:
it used to print '66' before the fix, prints '3' after the fix.
- restore the firmware
Review URL: http://codereview.chromium.org/6879051
Change-Id: I1c4240ebe5783ca923c310061e2a76947aa6601b
R=reinauer@chromium.org
BUG=chromium-os:14030
TEST=manual
On a Mario:
crossystem fwupdate_tries=3
crossystem fwupdate_tries # should be 3
cat /mnt/stateful_partition/.need_firmware_update # should be 3
crossystem fwupdate_tries=0
crossystem fwupdate_tries # should be 0
cat /mnt/stateful_partition/.need_firmware_update # should complain file doesn't exist
On a newer platform:
crossystem fwupdate_tries=3
crossystem fwupdate_tries # should be 3
cat /mnt/stateful_partition/.need_firmware_update # should complain file doesn't exist
crossystem fwupdate_tries=0
crossystem fwupdate_tries # should be 0
cat /mnt/stateful_partition/.need_firmware_update # should complain file doesn't exist
Review URL: http://codereview.chromium.org/6825047
