Previously, there was no way to identify which flash chip was used by
the EC, for ECs using an external SPI flash. Now, 'ectool flashinfo'
will print more information about the SPI flash chip in these cases.
BUG=chrome-os-partner:56765
BRANCH=any EC with MEC1322 or NPCX still going through factory
TEST=define CONFIG_HOSTCMD_FLASH_SPI_INFO, then
'ectool flashspiinfo' on samus indicates no SPI flash info,
and prints additional info on chell and kevin. Without
the config defined, all platforms report no spi flash info.
CQ-DEPEND=CL:386368
Change-Id: I3c162f7ad12ed4b30ab951c03f24476683382114
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/385702
Reviewed-by: Shawn N <shawnn@chromium.org>
User of sensor data can use tablet mode to rotate the sensor datums
along the X axis.
This is useful on Kevin where we gather base data.
When the base is behind the lid, the datums needs to be rotated by 180
to be in the lid referential.
BUG=b:27849483
BRANCH=none
TEST=check the sensors changes when kevin is in tablet mode.
Change-Id: I60147600f534df0770a44b5158ef8afe87d9dd9d
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/380413
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Add a hook to act when the a device is going in tablet mode and back.
BUG=chromium:606718
BRANCH=kevin
TEST=Test with evtest that an event is sent to the AP.
Change-Id: Ic9c3b158f1178504af41abff18b28de8e07fc7a7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/380412
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
BMP280 driver API is designed to work with motion
sensor task. The sensor sampling parameters are
configured optimally for handheld device in accordance
with BMP280 spec recommendation.
BUG=None
BRANCH=master
TEST=Tested on amenia; with appropriate .odr in board file
test command "accelread 4" returns raw pressure
value in Pa; accelinfo on 4000 shows Pa value.
Change-Id: I3f4c0c33a77dd317aa1425624d3cc7f4ec6b45a1
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/351660
Commit-Ready: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Tested-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Allow the host to self-report its sleep state through
EC_CMD_HOST_SLEEP_EVENT, which will typically be sent with SUSPEND
param when the host begins its sleep process. While the host has
self-reported that it is in SUSPEND, don't assert the interrupt
line, except for designated wake events.
BUG=chrome-os-partner:56156
BRANCH=None
TEST=On kevin, run 'ectool hostsleepstate suspend', verify that
interrupt assertion is skipped for battery host event. Run 'ectool
hostsleepstate resume' and verify interrupt is again asserted by the
battery host event.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I74288465587ccf7185cec717f7c1810602361b8c
Reviewed-on: https://chromium-review.googlesource.com/368391
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
If an HPD IRQ event is seen, make note of it and keep the status set
until informing the host.
BUG=chrome-os-partner:55925
BRANCH=None
TEST=Manual on kevin, trigger HPD event, verify that event bit is set in
reply to first host command and not subsequent host commands.
Change-Id: I0900a683dcb344d5d4d03a1fa6e3d8de913597b2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366990
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Currently, the matrix keyboard protocol does not have support for
handling non-matrixed keys. This commit adds support for buttons which
do not appear in the keyboard matrix as well as switches.
Additionally, the keyboard FIFO is now just a general MKBP events FIFO
which MKBP events are free to use. Now, buttons and switches wil join
the key matrix event.
BUG=chrome-os-partner:54988
BUG=chrome-os-partner:54976
BUG=chromium:626863
BRANCH=None
TEST=Flash kevin, and verify that keyboard is still functional.
TEST=make -j buildall
CQ-DEPEND=CL:358926
Change-Id: If4ada904cbd5d77823a0710d4671484b198c9d91
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/358633
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If the EC has CONFIG_HOSTCMD_RTC set to 'y', then export this via the
features host command. The kernel can then use this feature to expose
an RTC device under /dev/rtc*.
Signed-off-by: Stephen Barber <smbarber@chromium.org>
BRANCH=none
BUG=chrome-os-partner:54639
TEST=`ectool inventory` shows RTC on kevin
Change-Id: I644c8e61c4d9f691cc6ca94ef60bee4384c21660
Reviewed-on: https://chromium-review.googlesource.com/359414
Commit-Ready: Stephen Barber <smbarber@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Currently, it is assumed the host will sooner or later retrieve the
events from the sensor ring: It is only used by Android and the sensor
HAL is enabling the ring buffer at boot.
But if nobody processes the ring, and the ring is almost full, the EC will
generate interrupt for every new events.
This can happen with ARC, where events generated for ChromeOS
will be in the ring but nobody will process them until Android is
started.
Add a command to allow sending ring MKBP events. It will be used when
the IIO ring buffer is enabled / disabled.
It also can be used for preventing raising interrupt when the device is
about to go to sleep.
BRANCH=ryu,cyan
BUG=b:25425420,b:27849483
TEST=Check with fiforead that no events are queued when IIO ring
buffer is disabled.
Check with ectool and androsensor that interrupt generation stops.
Change-Id: Ibc85eed2e0eae3a9ec07d191e692118bc2fd0dab
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356689
Changes were submitted for ec_commands.h but only in the braswell tree.
Merge in ToT for future reference.
BRANCH=none
BUG=chrome-os-partner:50627
TEST=compile.
Change-Id: I74f6ce3c5fd2a628879593a65506d10c44ee574d
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356551
For designs where the host SOC is responsible for setting the USB-C SS
mux, the EC must track the desired mux state and inform the host when
the desired state changes. Then, the host must ask the EC for the new
desired state and set the mux accordingly.
BUG=chrome-os-partner:52639
BRANCH=None
TEST=Manual on gru with subsequent commit.
Attach USB dongle in port 1 and DP dongle in port 0, then verify `ectool
usbpdmuxinfo` output:
Port 0: DP
Port 1: USB
Flip DP dongle and verify output changes:
Port 0: DP INV
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6a99ce93a76c3197f9195cfaa25c5217d09aeb75
Reviewed-on: https://chromium-review.googlesource.com/355281
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Add a host event to support MKPB:
When sent, the ACPI code will send a notification to the kernel
cros-ec-lpcs driver that will issue EC_CMD_GET_NEXT_EVENT.
We can allow code (sensor stack for instance) that uses MKBP to work
on ACPI based architecture.
Obviously, host event over MKPB is not supported.
BRANCH=none
BUG=b:27849483
TEST=Check we get sensor events on Cyan through the sensor ring.
(cyan branch)
Change-Id: Iadc9c852b410cf69ef15bcbbb1b086c36687c687
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/353634
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This commands makes it possible to control the PD chip (or
the interaction between EC and PD), from the AP.
- PD_SUSPEND: Suspends the PD chip: EC needs to stop talking
to PD chip. Useful at beginning of PD FW update.
- PD_RESUME: Resumes the PD chip: EC can start talking to PD
chip again. Useful at end of PD FW update.
- PD_RESET: Resets the PD chip (called at the end of the update).
- PD_CONTROL_DISABLE: Prevents further calls to this command
(for security reason, we do not want the AP to be able to
call the other subcommands after the update has been performed).
BRANCH=none
BUG=chrome-os-partner:52433
TEST=ectool pdcontrol {suspend,resume,reset,disable}
Change-Id: I7a955dd27b65086c21d195a6504aa7392eb0406d
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/342584
Reviewed-by: Randall Spangler <rspangler@google.com>
This allows the AP to protect a I2C passthru bus. A board-specific
function then defines what I2C commands are allowed, so that we
can white/black list some addresses (e.g. I2C address allowing
PD chip FW updating).
BRANCH=none
BUG=chrome-os-partner:52431
TEST=Book elm-rev1
Change-Id: Ib106924418b16388ea8ea53c7b6bda6ef92e1d09
Signed-off-by: Nicolas Boichat <drinkcat@google.com>
Reviewed-on: https://chromium-review.googlesource.com/345761
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Randall Spangler <rspangler@google.com>
Enabled CONFIG_CMD_RTC_ALARM. EC_HOST_EVENT_RTC
is enabled when the rtc_alarm goes off,
alerting the AP to transition from S3->S0.
BUG=chrome-os-partner:52218
BRANCH=None
TEST=rtc_alarm <num> and see event set in ec console
after <num> seconds. Also, check if new bit set
through hostevent command in ec before/after
rtc_alarm goes off.
Change-Id: I53b1705ce0925000f35b9f80752035d198db3310
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/345474
Reviewed-by: Shawn N <shawnn@chromium.org>
Add generic PWM host commands for setting + getting duty cycle. PWMs can
be controlled through index (board-specific meaning) or by type
(currently KB backlight and display backlight are supported, more can be
added as needed).
BUG=chrome-os-partner:52002
BRANCH=None
TEST=Manual on chell.
`ectool pwmsetduty kb 100` - Verify KB backlight goes to 100%
`ectool pwmgetduty kb` - Prints 100
`ectool pwmgetduty 0` - Prints 100
`ectool pwmsetduty 0 0` - Verify KB backlight goes to 0%
`ectool pwmgetduty kb` - Prints 0
`ectool pwmgetduty disp` - Error res 3 (unsupported PWM type)
`ectool pwmsetduty 1` - Error res 3 (non-existent PWM index)
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I607c92a291e6c2e3af8238eaf22ad2bb81ffc805
Reviewed-on: https://chromium-review.googlesource.com/344012
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
This is keyboard test mechanism request for "multiple key press test",
we can thru the testing to scan out kso ksi pins shortting or keyboard has
multiple key pressing, below was the testing steps:
1. Turn off internal keyboard scan function.
2. Set all scan & sense pins to input and internal push up.
3. Set start one pin to output low.
4. check other pins status if any sense low level.
5. repeat step 3~4 for all keyboard KSO/KSI pins.
6. Turn on internal keyboard scan function.
BUG=chrome-os-partner:49235
BRANCH=ToT
TEST=manual
Short any KSO or KSI pins and excute "ectool kbfactorytest", it shows failed.
if no pins short together, it shows passed.
Change-Id: Id2c4310d45e892aebc6d2c0795db22eba5a30641
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/332322
Reviewed-by: Shawn N <shawnn@chromium.org>
This adds a temporary secure storage interface for the EC to be able
to store small amounts of data from the host that is locked until the
chipset resets. This is used by pre-memory verified boot on x86 systems
where we need to know which RW slot to boot and what the hash is to
ensure that we can resume from S3 safely.
BUG=chrome-os-partner:46049
BRANCH=none
TEST=tested on glados and samus
Change-Id: I5fa91046437479bcae69a8fca4c989b0ef554bbf
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/315222
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Added new host command to support returning lid angle.
New output from ectool:
System with lid angle support:
------------------------------------------
localhost ~ # ectool motionsense lid_angle
Lid angle: 72
System without lid angle support:
------------------------------------------
localhost ~ # ectool motionsense lid_angle
EC result 3 (INVALID_PARAM)
BUG=none
BRANCH=none
TEST=run "ectool motionsense lid_angle"
verify the value matches the physical lid angle position
Change-Id: I4179172c778f643640561e819216f7adfee679d2
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/313345
Reviewed-by: Shawn N <shawnn@chromium.org>
Add support for two new configs to specify critical energy battery
percentage and critical external charger power. When we are under both
thresholds, set the LIMIT_POWER charger parameter to inform the AP that it
should conserve power to avoid brownout, and consider jumping to EC RW
to negotiate PD.
In addition, modify the existing CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON
to allow power-up regardless of power level if a 15W+ charger is
attached, since there is a reasonable chance it may speak PD and provide
sufficient power to boot the AP.
BUG=chromium:537269
TEST=Manual on Glados. Set CHG_MW thresh to 20000, BAT_PCT to 50. Verify
that LIMIT_POWER charger param is set until Zinger negotiates to 20V. Also
veify that system can boot with Donette.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ic963c82fea4ad10e8a5d7e476c5ce3e5ae525dad
Reviewed-on: https://chromium-review.googlesource.com/306774
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
On some systems, we may wish to have the PD follow the EC into
hibernate. Add a status field to EC_CMD_PD_EXCHANGE_STATUS to support
this.
BUG=chrome-os-partner:45010
TEST=Manual on glados with subsequent commit. Run 'hibernate' on EC
console, verify that both EC and PD go to hibernate. Plug zinger and
verify that both EC and PD wake, AP boots, and battery begins charging.
BRANCH=None
Change-Id: I0476bc8a47ffb0fe113dccda9d4f8074105c1c84
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/302712
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Currently, the only way to prevent a system from hibernating is via the
EC console command "hibdelay". This commit adds the host command
equivalent so that it can be set elsewhere. The host command takes the
amount of time in seconds to delay hibernation by and responds with the
current time in the G3 power state, the time remaining before
hibernation should be invoked, and the current setting of the
hibernation delay.
BUG=chrome-os-partner:45608
BUG=chrome-os-partner:44831
BRANCH=None
TEST=Build and flash on samus. Issue the host command from EC
console. Verify that the hibernation delay was updated by checking with
the hibdelay command.
Change-Id: I34725516507995c3c0337d5d64736d21a472866c
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/302197
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Allow the host to enable/disable double tap.
Send event when double tap is present.
Also fix a bug when scanning for gestures.
BRANCH=smaug
BUG=chrome-os-partner:44754
TEST=compile. Check on Ryu.
Change-Id: I50d008cd3823072ab1c1e2d21f1276cd2185d797
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/298683
Add more flags to EC_CMD_USB_PD_CONTROL including whether
the port partner is PD capable, and if the port partner has
any of the following flags set in its capabilities: dual-role
power, dual-role data, USB comms capable, and externally
powered.
BUG=none
BRANCH=smaug
TEST=tested on samus using 'ectool --dev=1 usbpd 0'. Tested
with zinger, guppy, another samus, and other third party
devices to verify the flags are set as advertised in src/snk
capabilities packet
Change-Id: I4d78d1880073fdacce57516111ac6cab37b93f27
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300953
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add an interface with the host to set up gesture recognition.
Today, only significant motion is supported.
Add a virtual sensor for concentrating gesture support from host.
BRANCH=smaug
BUG=b:23570481
TEST=On ryu, enable significant motion from host.
Change-Id: I906fa2d2d7b4ca2771ea2f58b91de8d97bf4e2e3
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/296213
Add a flag in the FIFO event to tell that the sensor
want to wake up the AP.
Use this flag in the EC and let it reach the AP
for debugging.
Move fifo_flush as well, use only when FIFO present.
BRANCH=smaug
TEST=compile.
BUG=b:23570481
Change-Id: I5ff567b0f9f1e37a3dae16bfa7859c341f1a9b17
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/296212
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This commit adds a new basic driver for the Kionix KX022 Accelerometer.
Currently, the driver is capable of reading the sensor data and
manipulating its ODR, resolution, and range.
This sensor also has integrated support for Directional
Tap/Double-Tap(TM), however that functionality is not yet implemented in
the driver.
Lastly, since this accelerometer is very similar to the previous KXCJ9,
this commit tries to combine the drivers.
Note, the variant of the Kionix accelerometer MUST be specified in the
private data structure.
BUG=chrome-os-partner:43494
BRANCH=None
TEST=Build GLaDOS EC with driver enabled and verify that valid
accelerometer data is read, and that range, resolution, and odr can all
be modified.
TEST=Build samus EC image and verify that the lid still
works. Additionally, verify that I can change the odr, rate, and
resolution.
TEST=make buildall tests
Change-Id: I238ff1dc13f5342a93f8f701a0da85c52f25d214
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/299013
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Add all swap commands to USB_PD_CONTROL host command: data,
power, and vconn swap.
BUG=none
BRANCH=smaug
TEST=tested on both samus and ryu while connected to each other.
Change-Id: I280a0da2d3c5a5436243134ab3f2ec353ebf6ab8
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/299290
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add the Silicon Image sensors, add it to the motion_sense module
to be used with the FIFO.
BRANCH=smaug
TEST=Check light and proxy on Smaug:
Check Light value in Lux are reasonable.
Check Proxy is detecting object, but value are in opposite of distance.
BUG=chrome-os-partner:32829
Change-Id: I11419a0f0613f0fae9323f99deedf5a1e6c6e29c
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/291335
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Allow sending calibration information to the magnetometer.
BRANCH=smaug
TEST=Check from user space that calibration is taken into account.
BUG=chrome-os-partner:39900
Change-Id: Ic0f595bde1afdc0b6a79e3516a42b55d1f50c17c
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/291333
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
PD charger voltage + current can now be limited with
EC_CMD_EXTERNAL_POWER_LIMIT. The limit is automatically cleared when the
AP transitions out of S0 into S3 / suspend.
BUG=chrome-os-partner:43285
TEST=Manual on Samus w/ zinger.
- Plug zinger, verify charging at 20V/3A.
- `ectool extpwrlimit 3000 12000 --dev=1`, verify charging at 12V/3A
- `ectool extpwrlimit 1000 5000 --dev=1`, verify charging at 5V/1A
- Plug zinger into other port, verify still charging at 5V/1A
- `powerd_dbus_suspend`, verify charging at 20V/3A
- `chglim 2000 12000`, verify charging at 12V/2A
- `ectool extpwrlimit 0xffff 0xffff --dev=1`, verify charging at 20V/3A
- `chglim 1000 20000`, verify charging at 20V/1A
- `chglim`, verify charging at 20V/3A
BRANCH=ryu
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6cd5377be91b3df75f99cb414fd3fa5a463b56cb
Reviewed-on: https://chromium-review.googlesource.com/293954
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
When LPC mode is used, there is an assumption that the first
2 sensors are accelerometers, and the optional 3rd is a gyro.
Put the code that fill lpc_data with #ifdef.
Prevent lpc space corruption if more than 3 sensors are present.
BRANCH=smaug
TEST=Compile. Smaug works
BUG=None
Change-Id: I12c9b823efb57d7b190a1813228f6f02fa0bebcb
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/290073
Modify host_command_pd.c to loop over sending of PD status
host command and processing the response as long as the
alert GPIO is active.
This fixes a potential bug that if the alert line is held
low for more than one PD status host command, then we would
not process the return status.
Also, fix a bug in which we could call alert() for a
non-existent port.
BUG=none
BRANCH=strago
TEST=verified on samus and glados. connected charger and verified
that we negotiate a contract and set appropriate input currnet limit.
Change-Id: I3b2db87b51f55fc2b20a4695bd466ff8bb09ea55
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/288819
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: David James <davidjames@chromium.org>
To ease driver loading in the kernel, add a bit in the feature field
to indicate the EC has an internal software FIFO for sensor events.
BRANCH=smaug
BUG=chrome-os-partner:39900
TEST=compile, kernel modules load as expected on Smaug.
Change-Id: I1ae0b9ebb587bb4939745e8a0e16d73d95ba31d7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/285774
Reviewed-by: Alec Berg <alecaberg@chromium.org>
- Compass was not set properly if default config is set to
disable it (frequency == 0). We were trying to set it up
while stuck in debug mode.
- BMI150 FIFO collects sensor info even when suspended.
Ask FIFO to ommit suspended sensors.
- FIx compliation issue on nucleo-f411 board, where
MKBP is not enabled.
- Fix location of __packed arguement.
BRANCH=smaug
BUG=none
TEST=Check the compass is back with accelinfo,
FIFO is not filled with garbage with fiforead.
Check by echoing in in_accel_z_calibbias that the format
of MOTIONSENSE_CMD_SENSOR_OFFSET has not changed.
Change-Id: I7ebec12a14a74b8385b9f9532562a1fd0213f4d7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284929
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add code for set/getting calibration data on bmi160
Add code to perform FOC (Fast Online Calibration) on bmi160.
Add delay after getting out of suspend to be sure sensor is
available.
BRANCH=smaug
TEST=Check sensors are properly calibrated on Smaug:
Perform calibration:
echo 1 > /sys/bus/iio/devices/iio:device1/calibrate
Read calibration values:
cat /sys/bus/iio/devices/iio:device1/*_calibbias
Check the values are translated properly.
Write calibration values and check it affects the
sensor output.
BUG=chromium:506101,chrome-os-partner:39900
Change-Id: Ib9aad9bbd90b4249625641d68febf94b69aa4987
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/283165
Reviewed-by: Alec Berg <alecaberg@chromium.org>
