If VbInit() is instructed to look at a virtual dev-mode switch, then it will
use value contained in the TPM's firmware space instead of a hardware GPIO
to determine if developer mode is enabled.
This change just makes it look. It doesn't provide a way to actually set
the value in the TPM. VbInit() isn't being told to look yet, either. Those
changes are coming.
BUG=chrome-os-partner:9706
TEST=none
The usual sanity-check applies:
make
make runtests
But to actually test that this stuff is working IRL requires special tweaks
to other components and monitoring the serial debug output from both EC and
CPU. We'll save the hands-on tests for when it's all done.
Change-Id: Ie485ad2180224e192238bf2a5dbf95bbcb9130f9
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/23067
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Due to the limitation of servo that is unable to send U keys, dev USB boot
(triggered by Ctrl-U) is unable to be tested on FAFT. To solve it, firmware
should add an addition key combination to workaround it. Ctrl-Enter is the
one we picked.
BUG=chrome-os-partner:6759
TEST=compile the firmware and update it to Lumpy; during the dev screen,
press Ctrl-Enter to trigger USB boot.
Change-Id: I8215a241c3c07dc2f5e194c324459f106d007f47
Reviewed-on: https://gerrit.chromium.org/gerrit/15749
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Tom Wai-Hong Tam <waihong@chromium.org>
Tested-by: Tom Wai-Hong Tam <waihong@chromium.org>
This adds a flag to the list of values returned by VbInit(). When
this flag is set, the BIOS may be asked to boot something other than
ChromeOS. If this requires some sort of special preparation, the BIOS
should do it.
BUG=chromium-os:22454
TEST=none
There is no test for this. It requires a change to the BIOS in order
to do anything differently, and we haven't yet decided whether the
BIOS should pay attention to it.
Change-Id: I5d89e7cd5b745ee74b8ace7fa613c0db03eebefd
Reviewed-on: https://gerrit.chromium.org/gerrit/11714
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
As shipped, H2C only loads the option ROM for the built-in video, and that
only when it needs display the BIOS warning screens.
By setting a flag in the GBB, you can allow all option ROMs to be loaded:
Note that we'll never enable this ourselves (and there's a factory test to
ensure that*) because it executes non-verified code. But if a customer wants
to void their warranty and set this flag in the read-only flash so they can
install and use other PCI devices, they should be able to do so.
BUG=chrome-os-partner:6148
TEST=none
The only way to test this is to use a BIOS that was compiled with serial
debugging enabled, so there's nothing for QA to do. If you have such a BIOS,
you can see the difference like so:
flashrom -r oldbios.bin
gbb_utility -s --flags=2 oldbios.bin newbios.bin
flashrom -w newbios.bin
<reboot>
When bit 1 of the GBB flags is 0, you'll see these lines in the serial
output:
LoadOpRomImage-->GetSystemConfigurationTable Status = Success
LoadOpRomImage-->GetH2cBootMode Status = Success
When bit 1 of the GBB flags is 1, you'll see these lines in the serial
output:
LoadOpRomImage-->GetSystemConfigurationTable Status = Success
LoadOpRomImage-->GetH2cBootMode Status = Success
LoadOpRomImage-->PCI OpRom on 1.0.0 is allowed!!!
This happens in any boot mode (normal, developer, recovery).
--
*The factory test for GBB zero flags is gft_clear_gbb_flags.sh, in
src/platform/factory_test_tools
Change-Id: I31a10cc9d562b4b83669ca8a114b60e87ae28b0a
Reviewed-on: https://gerrit.chromium.org/gerrit/11505
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This enables us to support playing sounds in the background if the BIOS
allows it, so we don't have to block while beeping is happening. The new
declaration is:
VbError_t VbExBeep(uint32_t msec, uint32_t frequency);
If the audio codec can run in the background, then:
zero frequency means OFF, non-zero frequency means ON
zero msec means return immediately, non-zero msec means delay (and
then OFF if needed)
else:
non-zero msec and non-zero frequency means ON, delay, OFF, return
zero msec or zero frequency means do nothing and return immediately
The return value is used by the caller to determine the capabilities. The
implementation should always do the best it can if it cannot fully support
all features - for example, beeping at a fixed frequency if frequency
support is not available. At a minimum, it must delay for the specified
non-zero duration.
Currently, VbExBeep() is called only when displaying the dev-mode screen.
BUG=none
TEST=manual
I've tested on x86 and ARM, all timeouts and noises work as before.
Note that ARM and coreboot will require a corresponding change to their
VbExBeep() implementations, which will have to be handled with separate,
simultaneous CLs.
Change-Id: I3417ae4b99d9d0aee63f2ccaeed39b61d4333e5d
Reviewed-on: http://gerrit.chromium.org/gerrit/8234
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
The vboot library needs to decompress the images so that it can handle those
that are special cases (like rendering the HWID). This means that 1) it
needs access to the BIOS' native decompression routine, and 2) that
VbExDisplayImage() only needs to handle the uncompressed native-format image
and doesn't need to know about how the image is packed in the GBB.
BUG=chromium-os:19134
TEST=manual
This requires a change to vboot_api.h, which requires a (simultaneous)
matching change to the BIOS, at least for U-Boot, which builds separately.
I've made that change and run the "vbexport_test display" command from the
modified U-Boot, but that also requires a change to the way U-Boot is built
so that I can get at the U-Boot commandline.
Change-Id: I449fb467cd3a68e742f27ec41b95d52685459d89
Reviewed-on: http://gerrit.chromium.org/gerrit/6129
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
This also fixes one place where TPM error codes were getting lost.
BUG=chromium-os:18132
TEST=make && make runtests
Change-Id: I83c74e1103805f166d1dc7448be7d67bd46d15b3
Reviewed-on: http://gerrit.chromium.org/gerrit/4659
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The old (v2.0) parser is compatible with new (v2.1) structs. That is,
this won't break existing firmware or vbutil_firmware.
A new (v2.1) parser parsing an old (v2.0) struct will return 0 for the
flags.
This will be used to support the RO-normal code path in a subsequent CL.
BUG=chromium-os:17304
TEST=added unit tests; make && make runtests
Change-Id: I73bcd8acd3330b0d7d143061b5ef838e6d79cf1a
Reviewed-on: http://gerrit.chromium.org/gerrit/4030
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Pressing Tab at a firmware screen now displays real data, including
the recovery reason, HWID, and contents of VbNvStorage.
Entry point start/end time tracking in VbSharedData now refers to the
new wrapper APIs.
Added capability for calling firmware to request recovery mode (for
example, if it's unable to initialize RAM, can't find the SSD, etc.).
Previously, calling firmware had no (good) way to do this other than
faking the recovery button being pressed.
BUG=chromium-os:17018
TEST=emerge on x86 and tegra2_seaboard
Change-Id: I7d377f279842b30a10d945d13571c41c464633f1
Reviewed-on: http://gerrit.chromium.org/gerrit/3814
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
New APIs for the wrapper funtions (VbSelectFirmware() and
VbSelectKernel()) and the APIs for the firmware services they need.
BUG=none
TEST=none
Change-Id: Id8ddc456d062095b12495dd534e21342b5490aee
Reviewed-on: http://gerrit.chromium.org/gerrit/2195
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
