Before this change, powerinfo host command supports only one target
with USB charging. This change adds a common powerinfo host command
and console command for TPSChrome based targets.
BRANCH=None
BUG=chrome-os-partner:20326
TEST=manual
build and flash pit target, check console command 'powerinfo'.
check ectool powerinfo with and without AC adapter.
Change-Id: I2cfd8dfa011e23f819c6bae19cf22b4a7343f044
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63350
Reviewed-by: Vic Yang <victoryang@chromium.org>
Some chargers can run in a "turbo" mode, which lets it draw from the battery
to provide extra power to the AP in short bursts. In order for this to work
properly, the EC has to watch the current closely to make sure specific
limits are observed. It also has to recognize specific adapters, since those
limits vary depending on the rated power that the adapter can provide.
This adds the basic functionality, plus a test for it.
BUG=chrome-os-partner:20739
BRANCH=falco,peppy
TEST=manual
make BOARD=${BOARD} runtests
On Falco, you can also use the "adapter" EC command to see what's going on.
Try replacing the adapters and running that command to be sure they're
correctly identified, too:
> adapter
Adapter 65W (590mv), turbo 1, AP_throttled 0
>
We currently support 45W, 65W, and 90W adapters. Unknown adapters are
treated as 65W, but don't enable turbo mode.
Change-Id: I7e5407db825ce7e596cb495fb8cb4d1dd1ff639c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63372
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Rename onewire_led to led_driver_ds2413, since we may have other LED
drivers hanging off a one-wire bus in the future.
No functional changes, just renaming config options.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I1d70b1c5778da94bda4ebef3b57f7c39bfba2322
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63273
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
CONFIG_FMAP is now defined by default, because all platforms other
than the host unit tests use it.
No functional changes, just renaming config options and removing dead code.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Ie6496310c822491068e2fa6976933486f26badb0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63271
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Add a CONFIG_CHIPSET_X86 option that determines if
chipset_x86_common.o is built.
BUG=chrome-os-partner:20372
BRANCH=None
TEST=built bolt and link. All other boards should be covered.
Change-Id: I980a8fc68a31162b920429e695631909c5f6a4db
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63208
Reviewed-by: Randall Spangler <rspangler@chromium.org>
No functional changes, just renaming config options.
Remove README, now that all options described in it have been moved to
config.h, and the remaining information is out of date. (Yes, we
should have a README which describes the organization of the EC
repository, but that's a matter for another CL; this one's about
cleaning up config options.)
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Iafefbe94369f1217c698f11d358bc0ecac2bdfde
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63145
Reviewed-by: Vic Yang <victoryang@chromium.org>
All of these were defined on all but a few platforms, and those
explicitly #undef them. So define them as enabled by default in
config.h so the board.h files are cleaner.
No functional changes; just rearranging/renaming config constants.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; FEATURES=test emerge-falco chromeos-ec
Change-Id: I1201a1472ae29641e9e219c2a0347691ca64cd28
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63102
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just documenting and renaming.
All boards which use the PMU must provide pmu_board_init(). This was
already true - except that Daisy's pmu_board_init() was implemented as
part of pmu_init() instead of its code living in board.c; I've moved
the code there now.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I85ad06dc3b6287ad917fe13acf83182f24a8f23d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62906
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just documenting and renaming.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I0b0d3cdce535d90ce437e82e96346fc3ca9be7b0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62673
These are now described in config.h. The various BQ chargers now also
use a consistent naming for their sense resistor options.
No functional changes, just renaming, and removal of obsolete
never-defined configs.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Ie274546fe45f5ffc6fd0f26096c4622805baf8a0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62540
This file will soon contain the exhaustive list of all CONFIG defines
and their descriptions.
Chip-level configs are renamed to config_chip.h to avoid naming
conflicts.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I9e94146f5b4c016894bd3ae3d371c4b9f3f69afe
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62122
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
