1. KSO[0-15] and KSI[0-7] can be used as GPIO input if they are not set for
keyboard scan function.
2. Critical section for gpio_set_level().
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=console commands: gpioset, gpioget, and version.
Change-Id: I8edae122525e6dcebaa3489116642d8e48520569
Reviewed-on: https://chromium-review.googlesource.com/318112
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Rather than having various PWM module groups initialized from various
HOOK_INIT functions, group them all into a single module and initialize
them all from a common function in pwm.c.
BUG=chromium:563708
TEST=Manual on samus / samus_pd (with CONFIG_ADC enabled). Verify that
samus fan + KB backlight control is functional and samus_pd correctly
sets PWM output.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I9f9b09bfa544cd9bc6b7a867e77757dff0505941
Reviewed-on: https://chromium-review.googlesource.com/314882
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Some chips previously defined CONFIG_I2C and others didn't. Standardize
the usage by removing CONFIG_I2C from all config_chip files and force it
to be defined at the board level. Also, make boards define
CONFIG_I2C_MASTER and/or CONFIG_I2C_SLAVE based on the I2C interfaces
they will use - this will assist with some later cleanup.
BUG=chromium:550206
TEST=`make buildall -j`
BRANCH=None
Change-Id: I2f0970e494ea49611abc315587c7c9aa0bc2d14a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/310070
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
[irq]
1. The chip_init_irqs() function clears all IERx and EXT_IERx registers.
[jtag]
2. Enable debug mode through SMBus.
[system]
3. remove console_force_enabled functions.
4. implement __no_hibernate, scratchpad and nvcontext functions.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=chrome-os-partner:23575
TEST=1. IERx and EXT_IERx registers are all cleared after chip_init_irqs().
2. console command "scratchpad" and "hibernate".
3. bram bank0 index 0x10 ~ 0x1F (16 bytes) for
system_get_vbnvcontext() and system_set_vbnvcontext functions.
Change-Id: If044d50c69ae80b013ab646a3a6931cec7560ec4
Reviewed-on: https://chromium-review.googlesource.com/309390
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. Implement deep doze mode for CONFIG_LOW_POWER_IDLE.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=test the following items in deep doze mode.
1. WUI interrupts wake-up OK. (For example, power button, lid,
uart rx, keyboard ksi, and so on)
2. LPC access interrupt wake-up OK.
3. Enabled Hook debug, no warning message received (48hrs).
Change-Id: I8702a112632cb6c1c0fa75d682badf272130a7d4
Reviewed-on: https://chromium-review.googlesource.com/307060
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
[chip config]
1. No hardware specific udelay().
2. Enable watchdog.
[watchdog]
3. Watchdog period is "CONFIG_WATCHDOG_PERIOD_MS" of config.h.
4. Watchdog auxiliary timer period is "CONFIG_AUX_TIMER_PERIOD_MS".
[task and irq]
5. Write 1 to clear interrupt pending status, no |.
6. A global variable for store interrupt number of software interrupt.
[uart]
7. Always reset UART module before config it.
[hwtimer]
8. Use more external timers for HW timer module.
[task]
9. Fix task profiling.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=[watchdog]
1. console "waitms 1100", only pre-watchdog warning message.
2. console "waitms 1600", warning message and watchdog reset.
[hwtimer]
3. console commands "gettime", "timerinfo", and "forcetime".
4. enable hook debug and there is no delayed by more than 10%
warning message over 48 hours.
5. There is no watchdog reset too.
[task]
6. console 'taskinfo'
Task Ready Name Events Time (s) StkUsed
0 R << idle >> 00000000 32.927724 308/512
1 HOOKS 00000000 0.034267 372/768
2 R CONSOLE 00000000 0.116763 468/768
3 HOSTCMD 00000000 0.000641 372/512
4 KEYPROTO 00000000 0.000042 212/512
5 KEYSCAN 00000000 0.000908 356/512
IRQ counts by type:
38 2932
155 1
158 261
160 67
Service calls: 87
Total exceptions: 3348
Task switches: 167
Task switching started: 0.001999 s
Time in tasks: 33.282819 s
Time in exceptions: 0.164717 s
Change-Id: I234085cec231cd855d2a5e639ea1b0966c61d796
Reviewed-on: https://chromium-review.googlesource.com/296939
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. Host access to the PNPCFG registers is disabled.
2. UART2 for host if necessary.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. host can't access the PNPCFG registers.
2. out I/O port 0x2f8 '0x30, 0x31, 0x32, 0x33, and 0x34'
will have console message '01234'.
Change-Id: If07bdc129105f5248661d929e6858d4063c452ee
Reviewed-on: https://chromium-review.googlesource.com/300266
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. Fix fan turns on during sysjump if fan is disabled.
2. Remove unused board function.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1-1. Console 'sysjump RW' and fan keeps off.
1-2. Console 'fanset 4000' or 'fanset 0' and 'sysjump',
it dose maintain the fan RPM.
Change-Id: I531d49c2a8a9fea68af4507339c7be97367c504c
Reviewed-on: https://chromium-review.googlesource.com/299650
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. add lpc_keyboard_clear_buffer() function.
2. Enable P80L function, that LPC I/O port 80h data can be mapped
to BRAM bank1 (offset 0x80 ~ 0xBF).
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. The lpc_keyboard_clear_buffer() function can clear OBF.
2. 80h port, console command port80.
3. 62h/66h port.
3-a. out 66h 80h, out 62h 00h, in 62h 02h
3-b. out 66h 81h, out 62h 01h, out 62h 55h
3-c. out 66h 80h, out 62h 01h, in 62h 55h
3-d. out 66h 80h, out 62h 02h, in 62h aah
4. Host command "version".
Change-Id: Id2b5a5813cbe8edfc4ecc7b153874b819d460f43
Reviewed-on: https://chromium-review.googlesource.com/298421
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. Add flash control module for emulation board.
2. Fix system jump for Andes core.
3. Change the physical size of the flash on the chip to 256KB.
note:
1. Only IT839x series supports flash write protect by registers.
2. Static DMA method of flash code only for IT839x series and IT838x Dx.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. console command flashwp and flashinfo
1-a. flashwp enable
1-b. WP asserted and reboot
1-c. flashinfo RO protected now
1-d. WP deasserted and reboot
1-e. No protected
1-f. flashwp disable
1-g. WP asserted and reboot
1-h. No protected
2. console sysjump and sysinfo
2-a. sysjump rw
2-b. jumping to image RW
2-c. sysinfo, Copy : RW, Jumped : yes
2-d. sysjump ro
2-e. jumping to image RO
2-f. sysinfo, Copy : RO, Jumped : yes
3. RO/RW firmware image test
3-a. sysjump rw
3-b. use console command "eflash" to erase RO region,
erase OK and system still work.
3-c. reflash firmware
3-d. sysjump rw, sysjump ro
3-e. use console command "eflash" to erase RW region,
erase OK and system still work.
Change-Id: I7666a095e73026a02fb812e5143bc5172ab713e8
Reviewed-on: https://chromium-review.googlesource.com/271390
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Our existing GPIO macros use port# / gpio#, but the concept of different
GPIO ports does not exist on the mec1322. Therefore, add new GPIO macros
for chips which do not have distinct GPIO ports.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: Ibda97c6563ad447d16dab39ecadab43ccb25174b
Signed-off-by: Steven Jian <steven.jian@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/262841
Reviewed-by: Anton Staaf <robotboy@chromium.org>
In the gpio_info struct, we had a irq_handler pointer defined even
though a majority of the GPIOs did not have irq handlers associated. By
removing the irq_handler pointer out of the struct, we can save some
space with some targets saving more than others. (For example, ~260
bytes for samus_pd).
This change also brings about a new define:
GPIO_INT(name, port, pin, flags, signal)
And the existing GPIO macro has had the signal parameter removed since
they were just NULL.
GPIO(name, port, pin, flags)
In each of the gpio.inc files, all the GPIOs with irq handlers must be
defined at the top of the file. This is because their enum values from
gpio_signal are used as the index to the gpio_irq_handlers table.
BUG=chromium:471331
BRANCH=none
TEST=Flashed ec to samus and samus_pd, verified lightbar tap, lid, power
button, keyboard, charging, all still working.
TEST=Moved a GPIO_INT declaration after a GPIO declaration and watched the build
fail.
TEST=make -j BOARD=peppy tests
TEST=make -j BOARD=auron tests
TEST=make -j BOARD=link tests
Change-Id: Id6e261b0a3cd63223ca92f2e96a80c95e85cdefb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263973
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add EC2I control module for emulation board.
The EC2I bridge enables the EC to access the host controlled
module registers (e.g., host configuration module(PNPCFG) and SWUC)
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=EC2I read: Read a logical device page, the results are correctly.
EC2I write: Initialize PNPCFG success.
Change-Id: I900450d4a8c49182c438b69b5e738c12dc437fe4
Reviewed-on: https://chromium-review.googlesource.com/230410
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Previously if you were working on a single board you had to add BOARD=
to all of your make command lines. Now if you are in a board directory
you can just use "make", or "make clean", or any other top level make
command.
This commit also adds support for a top level "make flash" command that
can be used from the board directories as well. This command uses
openocd and requires that the board provides an openocd-flash.cfg file.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=(from a few board directories) make clean; make -j
(from the discovery-stm32f072 directory) make flash
Change-Id: Ie09a74881371169a2c3cd9cd9922f39f4873f1a6
Reviewed-on: https://chromium-review.googlesource.com/209669
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
This is a straightforward conversion of existing tables
into X-Macro style definitions for the GPIO alternate
functions. This change in itself, is not particularly
powerful, but having all GPIO settings in a single file
makes a board easier to understand.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Followed by manual testing of interrupt on change and UART
functionality on STM32F0 based discovery board.
Change-Id: Ib7f1f014f4bd289d7c0ac3100470ba2dc71ca579
Reviewed-on: https://chromium-review.googlesource.com/207987
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Previously each board.h and board.c contained an enum and an array
for gpio definitons that had to be manually kept in sync, with no
compiler assistance other than that their lengths matched.
This change adds a single gpio.inc file that declares all gpio's
that a board uses and is used as an X-macro include file to
generate both the gpio_signal enum and the gpio_list array.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Change-Id: If9c9feca968619a59ff9f20701359bcb9374e4da
Reviewed-on: https://chromium-review.googlesource.com/205354
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Initial support for the ITE IT8380 chip with the following peripherals :
- 8250-like UART module.
- HW timer (with a 128-us tick period).
- GPIO with pins initialization and edge interrupt support.
other functions are stubbed.
- Clock : basic fixed frequency setup only.
It also add the dev board configuration as a test vehicle.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:23575
TEST=make BOARD=it8380dev
on IT8380 dev board, use the EC serial console, use gettime from
console.
Change-Id: Id4bf37d1beb21d1a4bee404c9a0bc500025fe787
Reviewed-on: https://chromium-review.googlesource.com/175481
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
