For samus, on PD connection or on resume to S0, if we are a sink,
and the other side supports PR_SWAP, then attempt a power swap.
This adds callback functions into board policy file to check
and issue power or data swaps if required by the product.
BUG=chrome-os-partner:31195
BRANCH=samus
TEST=connect samus to zinger and make sure zinger always ends up
as SRC-UFP.
connect samus to samus with both in S0 and see that
they swap power roles once and not data roles.
connect one samus in S0 to one samus in S5 and see that the one
in S5 is sink. then when you boot the one in S5 it switches to a
source.
connect samus to samus with both in S0. do chgoverride 1 on one
side to start charging from the other samus. then on the same
side, turn off the machine (S5) and resume (S0), and see that it
is still charging from the other samus (ie has not switched roles
to source).
Change-Id: Ifab2465fccef77448ac4771a3c2de1c867cbbec4
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238302
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Create optional config to remove 'hash' console command and undef it
for a few space-constrained boards (ryu*, samus_pd).
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:34489
TEST=manual,
- compile for ryu, samus_pd and save ~400bytes
- 'hash' command no longer appears as a console command
Change-Id: I054fd4473911dd362c2c1d171ee7aaad859d893a
Reviewed-on: https://chromium-review.googlesource.com/238433
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Previously, handle_vdm_requests could dispatch another VDM message
via send_validate_message prior to main task returning to vdm state machine
(pd_vdm_send_state_machine). While it hasn't been problematic to-date it would
make honoring VDM specific timers or PDO priority difficult.
CL changes behavior so that if VDM being handled requires another VDM to be sent
its copied to the one entry queue (queue_vdm) where it will be
serviced upon VDM state machine entry later.
With this simplification, CL expands interlocks between PDO & VDO.
VDOs are only sent when source/sink is in the ready state & no
incoming packet is on the CC line. PDOs aren't sent when the VDM
state machine is busy.
CL also simplifies VDM console output to come only from request handler which
could save a few bytes.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:30645
TEST=manual,
1. dingdong/hoho still enter mode.
2. Can still update fw.
Change-Id: I2fe8643a6975205b2d0f510f4f1baf2d74c1e190
Reviewed-on: https://chromium-review.googlesource.com/235680
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
This addition allows the AP to query whether the PD device is currently
running from RO or RW FW.
BUG=chrome-os-partner:34599
TEST=Manual on Samus. Run 'ectool --name cros_pd infopddev 0' and verify
that correct RO/RW status of Zinger is printed. Verify that the output
matches the index printed by "pd 1 hash" on samus_pd console.
BRANCH=Samus
Change-Id: I4266cae931f5c7855ca0531717c4a18b138b2d62
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236771
Reviewed-by: Alec Berg <alecaberg@chromium.org>
In order to reduce flash size on some constrained boards this CL
modifies the GPIO macro in gpio_list.h to change the name field from
that listed 'name' to the concat of 'port' and 'pin'.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:34489
TEST=manual
1. build with and without CONFIG_COMMON_GPIO_SHORTNAMES
See >500 bytes savings with config option
2. See reduced names for gpioget
Change-Id: I6ed2c1d16aae5923fdf47a1b2dbb2362598a19e0
Reviewed-on: https://chromium-review.googlesource.com/236766
Trybot-Ready: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Remove common code across all PD policy layers to select the requested
voltage and build a Request Data Object (RDO).
BUG=none
BRANCH=samus
TEST=Load onto samus and connect zinger. Make sure we request the right
voltage (first 5V, then after initial contract is made, 20V). Make
sure input current limit is set appropriately by checking limit on EC
console using charger command.
Change-Id: Ic6bda5e23b2d7b7d710ffdf085e7fbc1b0c3add9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233673
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Ensure that the PD source changes the output voltage after
tSnkTransition delay after having sent the ACCEPT message
(rather than before).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33684
TEST=connect Zinger to a PD power sink and monitor VBUS and CC while
doing a 20V to 5V transition.
Change-Id: If86f59eec67630491f4e8dc13a52015ac2de918a
Reviewed-on: https://chromium-review.googlesource.com/230805
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Allow policy layer to request a PR or DR swap upon formation of
a power contract. Zinger always asks for a data swap so it can
be a UFP, and Samus asks for a data swap only if it is a UFP to
become a DFP.
BUG=chrome-os-partner:33754, chrome-os-partner:31195
BRANCH=samus
TEST=load onto samus and zinger and make sure they swap roles
upon connect with no collisions
Change-Id: I275c9669549c26f25c58f80845daad8edab11313
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229327
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add support for DR_swap, data role swap command.
BUG=chrome-os-partner:33686, chrome-os-partner:28343
BRANCH=samus
TEST=test with samus and zinger. use "pd 1 swap data" command
and verify data role swaps by using twinkie and "pd 1 state".
Change-Id: I410309199cdeecb26847a6bf217523fdfe688cba
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229192
Disable most of the pd console command to save space. The command
can still be used with subcommands "state" and "dump" to get state
information and change debug level.
BUG=none
BRANCH=none
TEST=make buildall with CONFIG_CMD_PD defined and undefined. Also
undefined the config option and loaded onto samus and verified that
the pd 0 state command still works.
Change-Id: Ie41bad53122a1e2a9ef4bad6423b9cdc85f53742
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229420
Reviewed-by: Vic Yang <victoryang@chromium.org>
This simply renames ryu to ryu_p1, and ryu_p2 to ryu. 'ryu_p1' will be
kept for a while and will be decommisioned when most developers make
switch to the new boards.
BRANCH=None
BUG=chrome-os-partner:33583
TEST=Build ryu and boot on P2 board.
Change-Id: Ief61c64c6aefdaeae76ac7b86e0ea28131810aa1
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
