Ports should have source roles by default, and should go back to being
sources once we stop charging from them.
BUG=chrome-os-partner:31195
TEST=Manual on Samus. Connect Samus to dual-role port. Set override
port, verify that Samus charges. Attach dedicated charger, verify that
the dual-role port becomes a charge source again. Also pass unit tests.
BRANCH=Samus
Change-Id: Icf153117229cbf0f71d4bdeb888f73299acd5eeb
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/237452
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Modify board_set_active_charge_port to return status indicating whether
the selected charge port was rejected. If rejected, zero out its
available charge and attempt to select a different charge port.
Also, reduce the length of related console prints.
BUG=chrome-os-partner:34677
TEST=Manual on Samus. Plug C-to-Arec into port 1, verify that charge
manager does not select port 1 as active and charging icon is not seen
in OS.
BRANCH=Samus.
Change-Id: I56e3337f90c04b93ef7cc9873af6ee0f4b1ffc7d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236361
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If override charge is selected on a port currently acting as a charge
source, but the attached device is also capable of acting as a source,
request a charge role swap and initiate a pending delayed port override.
If the role swap completes successfully and a charge source is found,
the selected port will become the override port. If the role swap fails
or no charge source is found within 2 seconds, the delayed port override
will be lost.
BUG=chrome-os-partner:28343,chrome-os-partner:31195
TEST=Manual on Samus. Connect two Samus units together through charge
ports.
"pd 1 swap power" - put port on test device into source role
"chgoverride 1" - set charge override, verify that role swap takes
effect and charge manager selects PD charge source, 900mA @ 5V
Disconnect charge cable, verify that charge manager goes back to not
charging.
BRANCH=Samus
Change-Id: Iadcc4dc98631661f254245eeff18973df517f652
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231900
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If our request is rejected, go to SNK_READY, but don't set
explicit contract flag.
This also changes charge manager slightly to avoid new power
request loops. A new power request is only requested if the
charge port changes, or if the active charge port changes its
voltage/current offering. A new power request does not occur
if the current ceiling changes, since the existing contract
still suffices.
BUG=chrome-os-partner:33692, chrome-os-partner:28332
BRANCH=samus
TEST=make buildall. use samus and make sure we negotiate for 20V
as normal. modify zinger to send a REJECT and make sure we go from
PD_STATE_SNK_REQUESTED to PD_STATE_SNK_READY and explicit contract
bit is 0.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Change-Id: Iec02663364dcdc4aa66c681ec08911db7424abbc
Reviewed-on: https://chromium-review.googlesource.com/230522
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add host command to set charge port override.
BUG=chrome-os-partner:32003
BRANCH=Samus
TEST=Manual on Samus. Insert PD charger in port1 and BC1.2 charger in
port0.
./ectool --name=cros_pd chargeoverride 0 --> Charges from port 0
./ectool --name=cros_pd chargeoverride off --> Charges from port 1
./ectool --name=cros_pd chargeoverride dontcharge --> No charge port
./ectool --name=cros_pd chargeoverride 1 --> Charges from port 1
./ectool --name=cros_pd chargeoverride 2 --> Correctly returns error
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ib35f797a4a24e96fd2e3c008ace3fd6291b89d25
Reviewed-on: https://chromium-review.googlesource.com/230910
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Don't charge from dual-role capable ports, unless an override is set to
force charge. Also, if an override is set to charge from a dual-role
capable port and a dedicated charger is attached, remove the override.
BUG=chrome-os-partner:32003
TEST=Pass unit tests
BRANCH=Samus
Change-Id: I4e81e39a9f6ba325fa8a5e8f0d77fd5bfc7a672c
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229465
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Allow a charge port to be selected as the override port, which means it
will always be selected as the charge port, if any charge supplier is
available.
BUG=chrome-os-partner:32003
TEST=Attach PD charger and BC1.2 charger. Verify that active charge port
switches to BC1.2 after running `chargeoverride [port]` from console.
Also, pass unit tests.
BRANCH=Samus
Change-Id: Ia1b48ca89641842d51be7eed3b92d36d3eedc9ef
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227730
Reviewed-by: Alec Berg <alecaberg@chromium.org>
