Storing nvram in SPI Flash becomes more and more popular. Retrieving
it takes quite a while due to various flashrom issues. While flashrom
still needs to be improved to minimize its running time, a good speed
up can be achieved by caching the nvram contents in crossystem.
The cache is invalidated each time nvram is written (this could be
optimized by updating the local copy, but probably is not worth the
extra effort).
BRANCH=storm
BUG=chrome-os-partner:33592
TEST=crossystem runs much faster now:
localhost var # time /var/tmp/crossystem
. . .
real 0m1.669s
user 0m0.790s
sys 0m0.170s
localhost var #
Change-Id: Ie4a483efc189257ff58c92bdc39871b917c89727
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/228655
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This gives recovery mode information on two boots back instead of one,
which may be handy for debugging.
It also allows determining whether a failure of the current boot
should try the other slot or go to recovery, using only information
stored in NV storage.
Added crossystem support for printing the fields, and unit tests.
BUG=chrome-os-partner:32585
BRANCH=none
TEST=make runtests; VBOOT2=1 make runtests
Change-Id: Ia9f4186210d30217b902db7c513ae4ab8851f8f4
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221230
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
We use a few bytes of battery-backed nvram to save some flags across
reboots. However if the battery discharges completely, these flags are lost.
There aren't any security issues with that since they reset to safe values,
but some of the flags are used to configure how the system boots in
dev-mode.
If a dev-mode user has completely replaced ChromeOS with some other OS, then
she often needs to set the dev_boot_usb and/or dev_boot_legacy flags as well
in order to boot it using Ctrl-U or Ctrl-L. If the battery dies, then those
flags are cleared, and the only way to make the Chromebook boot again is by
going through recovery, which wipes the disk.
This change uses a new NV space in the TPM to back up some of the nvram
flags. These nvram fields will be backed up:
block_devmode
dev_boot_legacy
dev_boot_signed_only
dev_boot_usb
fwupdate_tries
loc_idx
Because writing to the TPM space is slow and limited to an unspecified but
finite number of cycles, we only back up the fields when specifically
requested by the new backup_nvram_request flag. This flag will be set by
crossystem whenever it is used to change any of the fields listed above. The
backup will be attempted at the NEXT boot (because the TPM is locked after
booting), and the backup_nvram_request flag will be cleared if the backup
was successfull.
Note that this CL is for Top of Trunk only. The firmware will create the
required TPM spaces on systems that have never been booted, but we don't yet
have a secure or reliable method to update existing systems.
FYI, on Link, determining that the TPM's backup NV space doesn't exist adds
about 6ms to the boot time. If it does exist, the backup_nvram_request flag
is cleared automatically so it won't check until it's set again.
BUG=chromium:362105
BRANCH=ToT (only!)
TEST=manual
Testing this is a long and involved process. Read on...
First, there are host-side tests for it. In the chroot:
cd src/platform/ec
make runtests
Second, to test on a completely NEW system that was first booted with a BIOS
that contains this CL, do this:
Enter dev-mode
Use crossystem to set values for the fields listed above
Confirm that "backup_nvram_request" is set to 1
Reboot
Use crossystem to confirm that "backup_nvram_request" is now 0
Remove the battery and the AC
Reattach either battery or AC so it will boot again
Use crossystem to confirm that the backed up fields are still good, while
the others have been reset to default values
Switch to normal mode
Remove the battery and the AC
Reattach either battery or AC so it will boot again
Look at the bios info in chrome://system to see what crossystem says
Confirm that the dev_boot_* flags are all 0, while the others are restored
Third, to set things up to test this on an existing system (I used Link),
you have update the BIOS, delete both the Kernel and Firmware NV spaces in
the TPM, then reboot so that the BIOS will create the Backup, Kernel, and
Firmware spaces. It will only do that if they're all missing.
Open it up, disable write-protect, attach a servo, etc.
Switch to dev-mode, log in.
Run make_dev_firmware.sh
Reboot in recovery mode, and insert a USB stick with a test image on it.
NOTE: In order to fiddle with the TPM, we'll *always* have to boot in
recovery mode, since that's the only time the TPM is left unlocked. That's
NOT the same as pressing Ctrl-U at the scary boot screen. The rest of
these steps assume you've booted in recovery mode and are running from the
test image on the USB stick.
Run
make_dev_ssd.sh --remove_rootfs_verification --recovery_key
Reboot (recovery mode)
Run
mv /etc/init/tcsd.conf /etc/init/tcsd.conf.disabled
Reboot (recovery mode).
Run "tpmc getvf". It should say
deactivated 0
disableForceClear 0
physicalPresence 1
physicalPresenceLock 0
bGlobalLock 0
Run "tpmc geto". It should say
Owned: no
Now you'll need to build the "tpm-nvtool" utility. In the chroot:
cd src/third_party/tpm/nvtool
make
Copy that to the DUT, in /usr/local/bin.
Now run
tcsd
tpm-nvtool --list | grep Index
You may see a number of spaces, but you should at least see these:
# NV Index 0x00001007
# NV Index 0x00001008
Run
tpm_takeownership
It will prompt you for two passwords (and confirm each one). Respond with
something you can remember like "google".
Run
tpm-nvtool --release --index 0x1007 --owner_password "google"
tpm-nvtool --release --index 0x1008 --owner_password "google"
Verify that it worked with
tpm-nvtool --list | grep Index
Power off.
Using servo, flash the new BIOS that has this CL in it.
Power on, normally this time (not recovery mode). If all goes well, it
should create the correct NV spaces and boot into the SSD. Copy tpm-nvtool
into this image too, and run
tpm-nvtool --list | grep Index
You should now see at least these spaces:
# NV Index 0x00001007
# NV Index 0x00001008
# NV Index 0x00001009
Now you're ready to test the backup/recover feature.
Change-Id: I00031fa0774720147327e2ae0f37e26b34b86341
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/202138
Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
Currently, this does nothing. It just sets a flag that nothing looks at.
Don't get all wound up - we haven't abandoned our principles. This will
eventually be used to allow enterprise-enrolled customers to prevent
unauthorized use of developer mode in the Chrome OS devices that THEY OWN.
This is not Google deciding to turn a feature off, it's allowing the OWNER
to control the use of the feature. In some situations, the owner can be held
liable for what others do with the owner's equipment. This will help the
owner avoid those situations while their device is out of their immediate
control.
BUG=none
BRANCH=ToT
TEST=manual
Set the flag with:
crossystem block_devmode=1
Clear it with:
crossystem block_devmode=0
Retrieve the value ("0" or "1") like so:
val=$(crossystem block_devmode)
echo "the flag is $val"
or just test it directly like so:
if crossystem 'block_devmode?1' ; then
echo "devmode is blocked"
else
echo "devmode is allowed"
fi
It should be persistent across reboots.
Change-Id: I097f15b307e1c3a2a9db595e9495028a2eea6309
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197771
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds a VB_MAX_STRING_PROPERTY for callers that don't
want to guess at how big to make their buffers.
Additionally, it changes the size parameter to VbGetPropertyString()
from int to size_t.
BUG=None
TEST=compile the code
BRANCH=none
Change-Id: I22809d48e13b535593cb22a56444e2dcb27791a5
Reviewed-on: https://chromium-review.googlesource.com/175039
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Richard Barnette <jrbarnette@chromium.org>
Querying "debug_build" allows the caller to determine whether the
image has requested debug, independent of the setting of the
dev_mode switch.
BUG=chromium:308678
BRANCH=none
TEST=use the new command option on both base and dev images
Change-Id: I369f26d75156f2e88d9f6f467efbf8f633e78bda
Reviewed-on: https://chromium-review.googlesource.com/174107
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Reviewed-by: Will Drewry <wad@chromium.org>
Commit-Queue: Richard Barnette <jrbarnette@chromium.org>
"cros_debug" is usually the last token of kernel command line on UEFI/legacy
BIOS systems.
However, kernel command line may end with new line ("\n") and that may cause
strcmp to fail (i.e., can't detect "cros_debug" if it's the last parameter in
command line), so we need to add that into strtok delimiters.
BRANCH=none
BUG=chromium:222248
TEST=crossystem cros_debug # display 1 on UEFI system with cros_debug
Change-Id: I9aed1562291469118acbadcc5211ff5c45eb9feb
Reviewed-on: https://gerrit.chromium.org/gerrit/46106
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
This just adds a one-byte field in the nvstorage region for use in debugging
hard-to-catch errors. There's no official meaning or expectation for this
field. It's just a handy place to emit some information.
BUG=chrome-os-partner:11534
BRANCH=parrot
TEST=manual
Just change the value and ensure that it persists across a (working) reboot.
It's only updated at specific points under very exacting error conditions,
so all we really want to test is that it works as a place to store some
extra info.
crossystem recovery_subcode
crossystem recovery_subcode=14
reboot
crossystem recovery_subcode
The recovery_subcode byte is at index [6] of the VbNv.raw bytes that appear
when you press TAB, so you can find it there too:
VbNv.raw: 60 20 00 00 00 00 0e 00 00 00 00 00 00 00 00 65
Decimal 14 == 0x0e
Change-Id: I1930b8f81a03ab838dbee99a8d72c35a444efdfd
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/39803
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This option is disabled per default and can be enabled with
crossystem dev_boot_legacy=1
or by setting the GBB flag
GBB_FLAG_FORCE_DEV_BOOT_LEGACY 0x00000080
BUG=chrome-os-partner:6108
TEST=crossystem dev_boot_legacy=1
boot to dev mode screen, press CTRL-L, see SeaBIOS start
(other CLs needed)
BRANCH=link
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: I593d2be7cff5ca07b8d08012c4514a172bd75a38
Reviewed-on: https://gerrit.chromium.org/gerrit/31265
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
We need to know not only whether the HW WP pin is asserted, but whether the
flash chip has configured its software protection registers to actually
protect anything. This flag can be used to indicate that.
BUG=chrome-os-partner:13265
BRANCH=link
TEST=none
This just adds the flag. Nothing actually sets the flag yet, so there's
nothing to test.
Change-Id: Icba9945fb56eb3a4681486c630cbbdc9232485ef
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/31642
Reviewed-by: Randall Spangler <rspangler@chromium.org>
These fields are part of the version 1 struct, but were mistakenly
labeled as version 2 fields. Since ZGB firmware produces a version 1
struct, crossystem was treating the fields as unavailable.
BUG=chromium-os:33685
TEST=crossystem tpm_fwver tpm_kernver
BRANCH=none (OS utility change, not firmware, and affects only Alex/ZGB)
Change-Id: Ic857ee2da9a7ae7f0d42317b711bf102d068de64
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30904
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Sonny Rao <sonnyrao@chromium.org>
This adds two new flags to crossystem:
clear_tpm_owner_request
clear_tpm_owner_done
The first one requests that the firmware clear the TPM owner on the
next boot. When the firmware does this, it will set
clear_tpm_owner_request=0, and set clear_tpm_owner_done=1. The OS can
use the done-flag as a hint that trusted things guarded by the TPM are
no longer trustable.
BUG=chromium-os:31974
TEST=manual
crossystem
// both flags initially 0
crossystem clear_tpm_owner_request=1
crossystem clear_tpm_owner_done=1
// request=1, done=0; done can be cleared but not set by crossystem
reboot
tpmc getownership
// owned=no
crossystem
// request=0, done=1
crossystem clear_tpm_owner_done=0
crossystem
// both flags 0 again
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I49f83f3c39c3efc3945116c51a241d255c2e42cd
Reviewed-on: https://gerrit.chromium.org/gerrit/25646
This is more reliable than reading them through FDT/ACPI, since it reflects
the positions as shown to verified boot code.
Notes:
1. This affects ALL platforms with virtual dev switches (x86 AND arm)
2. The fix should have no effect on older platforms, but I haven't tested those.
BUG=chrome-os-partner:11805
TEST=manual
1. boot in normal mode.
devsw_boot = 0 # Developer switch position at boot
recovery_reason = 0 # Recovery mode reason for current boot
recoverysw_boot = 0 # Recovery switch position at boot
wpsw_boot = 1 # Firmware write protect hardware switch position at boot
2. boot in developer mode.
localhost ~ # crossystem
devsw_boot = 1 # Developer switch position at boot
recovery_reason = 0 # Recovery mode reason for current boot
recoverysw_boot = 0 # Recovery switch position at boot
wpsw_boot = 1 # Firmware write protect hardware switch position at boot
3. boot in developer-recovery mode using keyboard combo.
devsw_boot = 1 # Developer switch position at boot
recovery_reason = 2 # Recovery mode reason for current boot
recoverysw_boot = 1 # Recovery switch position at boot
wpsw_boot = 1 # Firmware write protect hardware switch position at boot
4. disable WP and reboot. wpsw_boot should be 0.
Change-Id: If4156b5e14c6923c5b331c7e5feaabbffe1dad37
Reviewed-on: https://gerrit.chromium.org/gerrit/29199
Commit-Ready: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Samsung want to know what memory type on the device. So this CL adds a
new field ddr_type to crossystem utility in order to query this info.
It is only available on ARM platform so far.
BUG=chrome-os-partner:10857
TEST=Built and boot on Snow successfuly. On userspace, query the field via:
localhost ~ # crossystem ddr_type
ddr3
Change-Id: I01d1dec412fe4052e1ea6cfe2e53830da97a710b
Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26411
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
For fastest boot, we don't want to load the VGA Option ROM every time, but
only when we need it. Coreboot does that loading, but it can't always know
when it's needed (with keyboard-based dev-mode, coreboot can't tell if we're
in dev-mode or not). By the time we get to U-Boot, it's too late, so we need
two extra bits - one for vboot to tell coreboot to load the Option ROM and
another for coreboot to let vboot know it's been done.
BUG=chrome-os-partner:8789
TEST=manual
The only visible change is that crossystem will now have an "oprom_needed"
flag that can be set or cleared. Nothing actually pays attention to it yet,
though.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I521a6afdfb8ea17a8148b32eeb858844c981de9c
Reviewed-on: https://gerrit.chromium.org/gerrit/26272
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Confirmed via codesearch that these fields are not used outside of
vboot_reference itself, and the only use inside vboot_reference is one
test which checked that the test error generation itself worked.
BUG=chromium-os:31668
TEST=make && make runtests
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Ic393e126ca2853f7aaff19ffd6fcdbdb1c47689f
Reviewed-on: https://gerrit.chromium.org/gerrit/24895
Reviewed-by: Simon Glass <sjg@chromium.org>
Previously, 'cros_debug' would ignore the kernel command line if
the system was booted in recovery mode. The check provided no
particular security benefit; it served only to complicate the work
of developers who wanted to boot debug images over USB with dev-key
signed firmware.
BUG=chromium-os:19236
TEST=Test 'crossystem cros_debug' on a system in the cited use case
Change-Id: Ie664c50984411340a10896137022d7d4ff503d0a
Reviewed-on: https://gerrit.chromium.org/gerrit/6663
Commit-Ready: Richard Barnette <jrbarnette@chromium.org>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
When you enter dev-mode,
Pressing Ctrl-U to boot from USB is DISABLED.
Booting any self-signed kernel from the SSD is ENABLED.
This replaces the "crossystem dev_boot_custom" argument with
"crossystem dev_boot_signed_only", which has the opposite polarity.
So if you want to dev-mode to only boot official kernels, you have to
explictly set it that way. If you leave dev-mode and then come back,
it will go back to the conditions shown above.
BUG=chrome-os-partner:5954
TEST=manual
Just run the factory flow. It was broken; this should fix it (except for any
workarounds that were added while it was broken; those may need to be
reverted).
Change-Id: I13e0edbc0e77c5d6ea609dabf771085006cd1805
Reviewed-on: https://gerrit.chromium.org/gerrit/11853
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Although we're now using a single unified BIOS, it is pretty nice to be able
to get a shell in developer mode while still using verified boot for the
kernel and filesystem. Alex & ZGB implemented this by requiring the dev-mode
user to install a special dev-mode BIOS. We don't do that, but we DO require
setting a special flag with "crossystem" to accomplish the same thing.
In order to allow booting a self-signed kernel, you must boot in developer
mode, open a shell, and run this:
crossystem dev_boot_custom=1
Special note to internal developers: If you're in the habit (as I am) of
booting directly from a USB stick in dev-mode, you'll have to run this:
crossystem dev_boot_custom=1 dev_boot_usb=1
Just using dev_boot_usb=1 is no longer enough, because the USB kernel is
signed using the recovery key and by pressing Ctrl-U, we validate it with
the kernel data key. That worked before this change because any self-signed
kernel was fine, and that's how the USB key was treated. Now it actually
requires a verified signature until you enable dev_boot_custom=1 also.
BUG=chrome-os-partner:5954
TEST=manual
Boot once in normal mode, which clears the special flags. Then switch to
developer mode. You should be able to boot and get a root shell.
Run
crossystem dev_boot_usb=1
Obtain a USB recovery image that's keyed differently. For example, if you're
testing with dev-keys, use a PVT-signed image or vice-versa.
Reboot into dev-mode with the USB recovery stick inserted. At the dev-mode
screen, press Ctrl-U. You should hear a single beep, but it should not boot.
Press Ctrl-D to boot from the hard drive, log in to a shell and run
crossystem dev_boot_custom=1
Repeat the previous test. This time when you press Ctrl-U, it should boot
the recovery image. Turn the system off before it does anything.
That's it.
Change-Id: I1811ee9a188974b3f94c83c52b00b60028b86c69
Reviewed-on: https://gerrit.chromium.org/gerrit/11442
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chromium-os:17433
TEST=make && make runtests. Additional manual tests:
0. Insert a valid dev-signed USB key.
1. Boot with dev switch off.
`crossystem dev_boot_usb` should print 0.
2. Flip dev switch on.
`crossystem dev_boot_usb` should print 0.
Ctrl+U at dev screen should beep, but not boot USB.
3. Type `crossystem dev_boot_usb=1`. Should succeed.
`crossystem dev_boot_usb` should print 1.
4. Reboot system.
At the dev mode warning, press Ctrl+U
System should boot from USB key
`crossystem dev_boot_usb` should print 0.
5. Flip dev switch off.
`crossystem dev_boot_usb` should print 0.
6. Flip dev switch on.
`crossystem dev_boot_usb` should print 0.
Note that this does not apply to Cr-48, Alex, or ZGB.
Change-Id: Idf85fdd642f38f531c89e5fa5b1679e84936d4da
Reviewed-on: http://gerrit.chromium.org/gerrit/3875
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Randall Spangler <rspangler@chromium.org>
Pressing Tab at a firmware screen now displays real data, including
the recovery reason, HWID, and contents of VbNvStorage.
Entry point start/end time tracking in VbSharedData now refers to the
new wrapper APIs.
Added capability for calling firmware to request recovery mode (for
example, if it's unable to initialize RAM, can't find the SSD, etc.).
Previously, calling firmware had no (good) way to do this other than
faking the recovery button being pressed.
BUG=chromium-os:17018
TEST=emerge on x86 and tegra2_seaboard
Change-Id: I7d377f279842b30a10d945d13571c41c464633f1
Reviewed-on: http://gerrit.chromium.org/gerrit/3814
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
This is part 2 of the wrapper API refactor. It adds stub
implementations for the host, and changes the host-side utilities to
use them. Firmware implementation is unchanged in this CL (other than
a few updates to macros).
BUG=chromium_os:16997
TEST=make && make runtests
Change-Id: I63989bd11de1f2239ddae256beaccd31bfb5acef
Reviewed-on: http://gerrit.chromium.org/gerrit/3256
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Header file changes for wrapper API implementation
Crossystem support for reading recovery reason from VbSharedData, and
explicit support for version 1 VbSharedData structs.
BUG=chromium-os:16970
TEST=make && make runtests; run crossystem on Alex and make sure it still reports recovery_reason in recovery mode.
Change-Id: I15195b899583e425d3c9e8df09842d764528e2cb
Reviewed-on: http://gerrit.chromium.org/gerrit/3203
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
This should be ready for the ARM team to pick up and work on. I added
a placeholder ARM implementation file, though it's not hooked up in
the Makefile yet.
As soon as you implement the VbNvStorage APIs, all the related
crossystem commands will start working. Ditto for VbSharedData.
The params which x86 gets from ACPI you'll need to get from u-boot
somehow, probably via your own kernel driver.
R=robotboy@chromium.org
BUG=chromium-os:12522
TEST=emerge-x86-alex vboot_reference, make sure it still works on x86
Review URL: http://codereview.chromium.org/6780008
Change-Id: I628ee56508421b937ed50db7cb9b8385408d2f5e
Change-Id: I5ed3509a9d4e578cd2e98f493dab59bc2fbd5827
R=dlaurie@chromium.org
BUG=chrome-os-partner:2748
TEST=manual
crossystem fwb_tries=3
(reboot)
crossystem tried_fwb
(should print 1)
crossystem fwb_tries=0
(reboot)
crossystem tried_fwb
(should print 0)
In dev mode...
Boot a kernel signed with the same key as in the firmware
crossystem kernkey_vfy
(should print sig)
Boot a kernel signed with a different key than the firmware
crossystem kernkey_vfy
(should print hash)
Review URL: http://codereview.chromium.org/6711045
R=reinauer@chromium.org
BUG=chrome-os-partner:2578
TEST=manual
crossystem vdat_timers
should show 'LFS=0,0 LF=number1,number2 LK=number3,number4'
where number1 < number2 < number3 < number4
crossystem vdat_lfdebug
run from a dev mode console, should show
'check=12,0 index=0x00 tpmver=(hex number) lowestver=(hex number)'
crossystem vdat_flags
run from a dev mode console, flags should be 0x04.
Review URL: http://codereview.chromium.org/6685068
Change-Id: Id7b958ae300d10cdcdc1b17a1bb17b7e5069166f
This CL is a user space counterpart of
http://codereview.chromium.org/6690023, which provided the
ability to retrieve buffers through chromeos_acpi driver.
The buffer contents is communicated as a multi line string
with each buffer byte represented as a two symbol hex
number. `crosstool', on the other has to map the buffer
contents into a certain binary structure. This CL add
conversion of the multiline string into a binary buffer and
also adds a temp. routine to dump the buffer contents on the
screen when `crosstool' is invoked.
Change-Id: I8dd3eb935332f9bc8769c71de0db302365f12d70
BUG=chromium-os:13069, chromium-os:13091
TEST=manual
- Install the new image on a target with firmware providing
the VDAT ACPI method.
- Run crosstool and watch for the last line:
vdat = 11 22 33 44 ff 1f 1c 40 ff 57 74 41 ff ff ff ff # Raw VDAT contents.
localhost tmp #
Review URL: http://codereview.chromium.org/6695012
Change-Id: I35158810184be03f18d98893e4dd640088384579
BUG=12904
TEST=manual
crossystem fwb_tries=1
crossystem fwb_tries?1 && echo YES || echo NO --> YES
crossystem fwb_tries?0x01 && echo YES || echo NO --> YES
crossystem fwb_tries?0 && echo YES || echo NO --> NO
crossystem fwb_tries=0
crossystem fwb_tries?0 && echo YES || echo NO --> YES
crossystem fwb_tries?1 && echo YES || echo NO --> NO
crossystem fwb_tries?0x01 && echo YES || echo NO --> NO
crossystem ecfw_act --> RW (if it's not, change RW to RO in the tests below)
crossystem ecfw_act?RW && echo YES || echo NO --> YES
crossystem ecfw_act?BOB && echo YES || echo NO --> NO
For the following tests, boot Alex with dev switch on and fwb_tries=1
Expected output of `crossystem mainfw_type mainfw_act cros_debug` under each of the following scenarios:
* Neither "cros_debug" nor" cros_nodebug" in kernel command line: normal B 1
* Kernel command line changed to include "cros_nodebug": normal B 0
* Kernel command line changed to include "cros_nodebugg": normal B 1
* Kernel command line changed to include "ccros_nodebug": normal B 1
Review URL: http://codereview.chromium.org/6665005
Change-Id: Ie62364a87f7f144ee647054d2a9ef83522cdbe7d
BUG=12904
TEST=manual
Expected output of `crossystem mainfw_type cros_debug` under each of the following scenarios:
* Boot Alex with dev switch off: normal 0
* Boot Alex with dev switch on (and dev firmware): developer 1
* Boot Alex with dev switch on (and normal firmware): normal 1
* Boot Alex with recovery firmware: recovery 0
* Boot Alex with dev switch off, then turn the dev switch on after booting: normal 0
* Boot Cr-48 with dev switch off: normal 0
* Boot Cr-48 with dev switch on: developer 1
* Boot Cr-48 with recovery firmware: recovery 0
* Boot Alex with dev switch off and kernel command line changed to include "cros_debug": normal 1
* Boot Alex with dev switch off and kernel command line changed to include "cros_debugg": normal 0
* Boot Alex with dev switch off and kernel command line changed to include "ccros_debug": normal 0
* Boot H2O BIOS with kernel command line changed to include "cros_debug": nonchrome 1
* Boot H2O BIOS with kernel command line changed to include "cros_debugg": nonchrome 0
* Boot H2O BIOS with kernel command line changed to include "ccros_debug": nonchrome 0
Review URL: http://codereview.chromium.org/6659021
Fix try_b processing
And move key block flags check up in LoadFirmware(), which speeds up
boot when the dev switch is off because it doesn't do a signature
check and then throw it out.
BUG=12282
TEST=build firmware, try by hand
Review URL: http://codereview.chromium.org/6596081
Change-Id: I10474e9e0ae324906dfe02a351347d04ce847f67
1) Did firmware attempt RW slot B before slot A?
2) Did firmware check the kernel keyblock signature, or just its hash?
Added crossystem support as well.
BUG=chrome-os-partner:1657
TEST=make && make runtests
Review URL: http://codereview.chromium.org/6597011
Change-Id: I0d743ae87cedd938ba988170793717d3fdbd8ce9
Change-Id: I3f158115c8514bda0b271674870d68717c4816e6
BUG=12282
TEST=manual
crossystem fwb_tries=0 && crossystem fwb_tries
This should print 0 on both BIOSes.
crossystem fwb_tries=6 && crossystem fwb_tries
This should print 1 on an older BIOS and 6 on a new BIOS (0050+)
Then reboot and run
crossystem mainfw_act
This should print 'B', since fwb_tries was non-zero.
Review URL: http://codereview.chromium.org/6576059
Change-Id: If2106cbde445edc0970862a06d3837d2e466d9ef
BUG=chrome-os-partner:2487
TEST=manual
From a root shell, type: crossystem fmap_base
Should match the contents of /sys/devices/platform/chromeos_acpi/FMAP
(note that you need a new BIOS >0049 to get one that supports FMAP)
Review URL: http://codereview.chromium.org/6580037
crossystem now covers all data currently provided by chromeos_acpi.
Change-Id: I3364c4d65ddf63fe788d3d9c1e9d05e64be22856
BUG=chromium-os:12282
TEST=manual - test on Cr-48 and compare with ACPI values
Review URL: http://codereview.chromium.org/6557001
crossystem can now be used in place of reboot_mode.
BUG=12327
TEST=manual by comparing with the old reboot_mode utility
crossystem recovery_request=1
reboot_mode
crossystem dbg_reset=1
reboot_mode
crossystem fwb_tries=1
reboot_mode
crossystem recovery_request=0
reboot_mode
crossystem dbg_reset=0
reboot_mode
crossystem fwb_tries=0
reboot_mode
Review URL: http://codereview.chromium.org/6538066
Change-Id: Ifde661d4621129d52e757654d85e386e65f90df5
Note that both the current and boot settings are incorrect as reported
by the BIOS. This fixes both.
Change-Id: Iebd2b4ac91232444e538f6e2763a22cb227f2e4f
BUG=chrome-os-partner:2078
TEST=manual
Run crossystem on Mario and Alex with WP enabled, disabled and check
Verify true hardware WP status by doing:
flashrom --wp-enable
flashrom --wp-status
flashrom --wp-disable
flashrom --wp-status
On a system with hardware WP enabled, the disable step should fail and write
protect will still report enabled.
Review URL: http://codereview.chromium.org/6531035
Works for getting switch positions, hwid, fwid.
BUG=chrome-os-partner:1940
TEST=ran manually on Mario and Alex
Review URL: http://codereview.chromium.org/6413002
Change-Id: I874df3b5adf872fec2d36e574cb4b8b4a72d331c
